SHRED-TECH - ST20, ...Dual Shaft ShredderSpecifications: -- Motor: (1) 20 HP. -- Cutter width: 3/4" Approx. -- Mounted on stand. -- Feed Hopper.

SHRED-TECH - ST50, ...Dual Shaft ShredderSpecifications: -- Motors: (2) 20 HP. -- Cutter width: 1" Approx. -- Cutting Chamber: 20" x 35". -- Control Panel. -- Mounted on stand. -- Feed Hopper: 21" x 40" Opening.Can be shown under power.

SHRED-PAK - 180, ...Double Shaft ShredderSpecifications: -- (2) 75 HP Motors. -- Hook Knives: 2"; (32) knives. -- Conveyor: 60" Wide x 24 ft. long for feeding or exit. -- Control Panel: 600 - 120. -- Stand.Loaded onto Truck.

SHRED-PAX - AZ-80, ...Shredder -- Dual Shaft Shredder. -- Motors: (2) 40 HP. -- Blades: 1" Width; (26) blades total. -- Crescent Moon Ram Assist. -- Ram rebuilt. -- Loaded onto your Truck.

SICOTTE - T 1050, ...Horizontal Boring Machine 2-Spindle Horizontal Borer.Equipped with: -- 1 HP Motor, timing belt drives with motor starter. -- (2) Horizontal spindles, 2" dia. with Jacobs® Chuck, 0 - 1/2" capacity, turning at 3,450 RPM.Features: -- 4" Boring head stroke with air/oil system and adjustable feed speed. -- Spindle mount on dovetail beam with min. 2" to a max. 11-3/4" center distance.Complete with: -- (2) Pneumatic holddowns & 12" x 16" wooden table size.

SICOTTE - Airbor 700-6, ...Vertical Boring Machine18" x 72" Table; variable air/oil feed table; up to 6" adjustable stroke.Equipped with: -- (3) Vertical 2" dia. spindles with Jacobs® Chuck, 0 - 1/2" cap.; spindles fully adjustable to entire table surface and can be as close as 2" center-to-center; spindle speed of 3,600 RPM. -- (3) 2 HP - 1,800 RPM motors, each motor timing belt drive mounted on a cast iron base with eccentric locking mechanism and a cast iron arm that has 18" of adjustment.Complete with: -- (2) Air loaded holddowns. -- (1) Foot switch for boring cycle. -- Includes Safety shield.

SICOTTE - J 3H-6, ...Vertical Boring Machine24" x 72" Table size, (5) Spindles.Equipped with: -- (3) 1 HP Motors mounted on 24" long arms with motor starter and overload relay. -- (5) 1-1/2" Dia. spindle with set screw locking 1/2" cap. -- (2) Spring-loaded holddowns. -- (1) Additional motor started with overload for future installation of a spindle drive motorFeatures: -- 0" - 8" Vertical table feed, hydraulically operated, variable feed, and table travel adjustable from front of machine. -- 3 HP Hydraulic pump motor with reservoir. Complete with: -- Electrical Control System with separate motor controls. -- Single or continuous stroke. -- Manual and automatic cycle. -- Foot pedal actuation. -- (1) Safety guard.

SICOTTE - J 3H-7, ...Vertical Boring Machine24" x 84" Table size.Equipped with: -- (6) 1 HP Motors mounted on 24" long arms with motor starter and overload relay. -- (9) 2" Dia. spindles with Jacobs® Chuck, 0 - 1/2" capacity. -- (1) Dovetail beam 2-7/8" x 84" for straight line boring application.Features: -- 0" - 8" Vertical table feed, hydraulically operated, variable feed, and table travel adjustable from front of machine. -- 3 HP Hydraulic pump motor with reservoir. Complete with: -- Electrical control system with separate motor controls. -- Single or continuous stroke. -- Manual and automatic cycle. -- Foot pedal actuation. -- (1) Safety guard.

SICOTTE - J 3H-7, ...Vertical Boring Machine24" x 84" Table size. Equipped with: -- (5) 1.5 HP Motors mounted on 24" long arms with motor starter and overload relay. -- (5) 1-1/2" Dia. spindles with spring collet 1/2" capacity. -- (2) Spring loaded holddowns.Features: -- 0" - 8" Vertical table feed, hydraulically operated; variable feed and table travel adjustable from front of machine. -- 3 HP Hydraulic pump motor with reservoir. Complete with: -- Electrical Control System with separate motor controls. -- Single or continuous stroke. -- Manual and automatic cycle. -- Foot pedal actuation. -- (1) Safety guard.

SICOTTE - J-30-4, ...Vertical Boring Machine24" x 48" Fixed table and moving head.Specifications: -- (3) 1-1/2" Spindle with spring collet, 1/2" capacity. -- (3) 2 HP - 1,750 RPM - TEFC Motors, each motor with timing belt drives. -- (2) Spring loaded holddowns. -- Table is fixed while the heads with spindles move hydraulically up & down with an adjustable speed feed (this arrangement can be equipped with an automatic feeding device).Features: -- 0" - 8" Adjustable head stroke. -- Foot pedal activated. -- Vertical stroke and feed speed of the heads with spindles are both adjustable. -- 3 HP Hydraulic variable feed motor, vertical spindle movement; movement can be set to either manual, single stoke, or continuous stroke.

SIEMENS - 75 KVA,... 480 - 380Y/220 Volt 3-Phase Dry Type TransformerSpecifications: -- General purpose: Intended for power, heating, and lighting applications. -- Enclosure Rating: NEMA 3R ventilated; for indoor or outdoor use. -- Multi-tap (432-504) Primary 480 V (Delta); Secondary 380/220 Volt Y - 60 HZ ventilated. -- Aluminum winding material. -- NEMA Class ANN. -- Catalog # 3F6Y075FCD16.(2) Available; priced per unit; make offer for both!

SIERRA - RB5000, ...Portable Baler/LoggerNew in 2011 - Less than 500 hoursFeatures and Specifications: -- Faster cycle times equals higher production volume. -- Features an easy-to-load loading box that opens to 16’-5"; x 8’-1"; and short-stroke rams that greatly reduce cycle times. These powerful rams crush each load with 240 tons of force per side, producing:Logging production: 16 - 22 Tons per hourBaling production: 10 - 14 Tons per hour -- The "RB5000" is the perfect machine for any scrap yard that receives appliances, sheet iron, smaller automobiles & automobile shells, clips, and busheling as their main source of material. -- The "RB5000" Portable Baler/Logger compresses logs and bales to shredder and mill specifications. -- Typical log density: 25 to 35 Lbs. per cubic foot. Average overall weight: 1400 lbs. -- Typical bale density: 80 to 90 lbs. per cubic foot. Average overall weight: 850 lbs. -- Any transfer station that receives a high volume of appliances and sheet iron can also greatly reduce freight costs by baling and logging. -- The structural details and proper design protect the key components of the "RB5000". -- The solid self-framed construction of this portable baler/logger includes SIERRA’s: Standard L-box shaped design, 11/16th-inch abrasion-resistant steel Hardox 450 liner plates, and outer honeycomb construction creating a greater box integrity and adding to the "RB5000’s" longevity. -- For added versatility, the Crane is independent of the Baler, has a continuous rotation, and is fully operational while the Baler/Logger is in use, increasing productivity. -- The Crane features 24-2/3 Ft. boom length and 4,400 Lbs capacity while fully extended and includes an orange peel grapple with a rotator that was specifically designed to handle bales and logs. The well-designed cab and agronomical controls were designed for comfort, safety, and long-term use.

SIERRA - 700T, ...Shear BalerSpecifications: -- (2) 100 HP Electric Motors -- Preload Table -- Precompression -- Shearing: 14 - 17 Tons per hour -- Baling: 12 - 14 Tons per hour -- Logging: 15 - 17 Tons per hour -- Cylinders: (1) Main Compression ram; (6) folding box rams. -- Cylinder forces: Shear - 700 tons precompression; 115 tons main compression; 160 tons folding box; (6) cylinders @ 80 tons each; 240 tons each side. -- Folding Box Dimensions: 19 ft., 8 in. x 7-2/3 ft. Open: 19 Ft., 8 in. x 32 in. x 24 in. Closed: 34 In. x 22 in.Shear Throat

SIERRA - 700T, ...Shear BalerSpecifications: -- (2) 100 HP Electric Motors -- Preload Table -- Precompression -- Shearing: 14 - 17 Tons per hour -- Baling: 12 - 14 Tons per hour -- Logging: 15 - 17 Tons per hour -- Cylinders: (1) Main Compression ram; (6) folding box rams. -- Cylinder forces: Shear - 700 tons precompression; 115 tons main compression; 160 tons folding box; (6) cylinders @ 80 tons each; 240 tons each side. -- Folding Box Dimensions: 19 ft., 8 in. x 7-2/3 ft. Open: 19 Ft., 8 in. x 32 in. x 24 in. Closed: 34 In. x 22 in.Shear Throat -- Disassembled approx 3 years ago --Running when removed from service

SIGNODE HBX-4300 Semi-Automatic Strapping MachineThe Signode HBX-4300 semi automatic strapping machine is designed for general duty strapping applications. The HBX-4300 provides high-speed, jam-resistant operation and cycles up to 70 straps per minute, making it the fastest plastic strapping machine in its class.Features: -- Patented, jam-resistant technology. The HBX-4300 is designed to deliver the most jam-resistant technology available, automatically correcting miss-trap occurrences without operator intervention. -- Lubrication-free operation. The HBX-4300's self-lubricating design provides excellent durability and maintenance-free operation. -- Fully accessible strap path. The HBX-4300's machine and strapping guides are easily opened, providing complete access to the strap path without using any tools. -- Patented automatic cut-off and refeed option. The HBX-4300 can be equipped with our patented automatic cut-off and refeed option which automatically ejects misfed strap, rethreads itself and continues strapping without operator intervention.Machine has a 16" X 10" chute.

SILVER SJK-19T Line Boring MachineSingle line vertical boring machine with (19) spindles at 32 mm centers driven through a powerful 1.5 HP motor.Equipped with: -- Foot pedal controlled pneumatic boring cycle -- Adjustable boring feed speed -- Adjustable boring depth for fast changeover -- 2 Pneumatic cylinder clamp for solid hold-down to the material. -- 3 Meter long back fence for long line boring with flip stops -- (2) Positioning pins at both end of boring head to set up for longer line boring quickly -- Quick change chuck for fast changeover (19 pcs included)Specifications: -- No. of Spindles....................................................................................... 19 -- Distance between each spindle.............................................................. 32 mm -- Max Boring Depth .................................................................................. 60 mm (2.36") -- Working Table Size................................................................................ 800 x 500 mm (31.5" X 19.68") -- Table Height from Floor......................................................................... 780 mm (30.35") -- Max Boring Depth from Edge................................................................. 155 mm (6") -- Electric .................................................................................................. 220 V / 60 Cy / 3-Ph -- Machine Size (LxWxH) ........................................................................... 920 X 670 X 1490 mm (36.25" x 26.37" X 58.66") -- Net Weight ............................................................................................ 220 kgs. (484 Lbs)

SILVER SJK-21 Horizontal & Vertical Boring on 32 mm centers.(21) Spindles in line on one boring head (aluminum alloy single block), drills vertically from top & horizontally from rear. -- Features pneumatic adjustment for horizontal boring.Specifications: -- Max drill dia. is 1.38" (35 mm); Max panel thickness is 2.36" (60 mm); Table size 36" x 19.75" (914 x 502 mm). -- Length of cross fence is 102" (2,600 mm); length of aluminum table fences are 39" (1,000 mm) to the left and 28" (710 mm) to the right with flip stops.Equipped with: -- Depth stop adjustment, (2) holddown air cylinders, and foot pedal operation for clamping/drilling cycle. -- 2 HP - 3,600 RPM TEFC motor with thermal overload protection and low voltage controls.. -- Includes (12) Quick change chucks..

SILVER 6023AH Moulder Feed Through 6-Head (B-R-L-T-T-B), working cap. 9-1/16" x 6". Head sequence: -- Bottom 10 HP, top 10 HP, right 10 HP, left 10 HP, top 15 HP, top 15 HP and bottom 15 HP motor. -- Spindle dia. 40 mm with cutterhead speed of 6,000 RPM. -- All spindles with mechanical digital readouts. -- Feed: Variable speed of 18 - 82 FPM, with 5 HP feed drive motor. Powered feed rollers top and bottom. -- Infeed: Straightening table 2 M (6'6"), with side pressure roller and table lubrication pump. Includes:: -- Centralized control panel, -- Sound and safety enclosure.

6 Ft. x 20 Ft., Single-Deck Vibrating Screen;Complete with the following features: --Counterweight type Drive with TEFC Motor. -- Food grade construction throughout. -- Accessible hinged Feed Box. -- Dust Cover. -- Double-crowned Screen Ball Deck with (6) Wire Screens. -- Total screening area of 6’x20’. -- Fines Collection Hopper with Discharge Spout. -- Factory Frame. NOTE: &#9679 This is a single-cut screen for two outputs. &#9679 Never Used.

SIMI 5' x 10' HOT PRESS Platen dimension 123" x 63" (3,125 mm x 1,600 mm). -- Max. daylight opening 17" (430 mm). -- (8) Hydraulic upstroke cylinders with diam. 6" (150 mm). -- Electrically heated platens with a maximum heating temperature of 240 F (120° C) -- Loading on all (4) sides of press.Overall dimensions: Length 165" x 81" x 117-1/4"