Edgebanders For Sale

STEFANI SOLUTION 8600 CNC EDGEBANDER CNC HORIZONTAL & VERTICAL POSITIONING, STANDARD STATIONS, PRE-MILL, ROUGH & FINE TRIM STATIONS, CORNER ROUNDING, MX80 HSK MILLING UNIT, RAS/S & RCA/2C SCRAPING UNIT, SP/F TOP & BOTTOM BUFFING EDGEBANDING THICKNESS: 0.4MM – 22MM PVC & ABS IN COIL OR STRIPS HPL STRIPS SOLID WOOD UP TO 22MM PANEL HEIGHT: 10 - 60MM (3/8” MIN – 2 3/8” MAX) MINIMUM PANEL LENGTH: 140MM (5 1/2”) MINIMUM PANEL DIMENSIONS: WITH MANUAL IN-FEED LENGTH WISE : WIDTH X LENGTH90 X 220 MM (3 1/2" X 8 3/4") CROSS WISE : WIDTH X LENGTH 220 X 135 MM (8 34" X 5 3/8") FEED SPEED: 12 - 25 M/MIN (40 - 82 FT/MIN) MINIMUM DISTANCE BETWEEN PANELS: 650MM (25 1/2”) (32” WITH CORNER ROUNDING) MACHINE WORKING HEIGHT: 950MM – 970MM (37.4” – 38.2”)

STEGHERR KPP Vertical Edge Gluing Bander; 2,600 mm (102") Working length, 53 mm (2.08") max. workpiece thickness, solid edge material up to 25 mm (1") thick, edge pressure 6 kg/cm (13 Lbs) pressure for the length of 2,500 mm and thickness of 20 mm at 3.5 bar.Specifications: -- Panel and wood strip are positioned into press chamber, maximum edge strip 2" X 1-1/2". -- Foot switch activates the air tube pressing system, and continuous bottom and side pressure evenly distributed over the entire workpiece allows tight glue joints (panel clamping pressure 80 PSI, edge strip clamping pressure 55 PSI). -- Panel heating unit - 850 watts (220 V, 1 Ph) temperature control from 40° - 150° C (104° - 300° F). A moveable clamp gauge positions the edge strip for drop edges or overhangs.Features: -- Special stop gauge allows for the positioning of mitered corners. Average PVAC glue cure time 40 - 70 Seconds.

TECNOMA - XT10.3 RS, ...Single Sided Edgebander.5/16" (5 mm) Max. edge cap., 1-1/2" (40 mm) max. banding height, 2-3/8" (60 mm) min. panel width, and 5-1/2" (140 mm) min. length. Equipped with: -- Automatic coil feed magazine with semiautomatic feed for strips, -- Teflon® coated glue pot (Heat up time 8 Min), -- Heavy-Duty 3 mm PVC capacity guillotine, 2-roll pressure unit w/1st roller power driven via clutch with pneumatic in & out positioning; 2nd roller idler roller. Workstations: -- Double motor front & rear end trim (0.41 HP - 12,000 RPM motor ea.), tilts 0° - 15°; end trimmer mounted on 45° THK guides. -- Top & Bottom flush trims (0.46 HP - 12,000 RPM motor ea.), equipped with "Quick Release" electric connectors for easy swap out of trim motors/tooling. -- Last Station: Top & Bottom buffing unit (0.2 HP - 2,750 RPM motor ea.), both adjustable. -- Single 26 FPM fixed feed speed, 0.8 HP feed drive. Complete with: -- Sound-proof enclosure, "Special" 70 mm wide chain pads, (2) rows of upper pressure wheels (60 mm dia. ea.) with "ball bearings" (vs. bushings) for long production life.

Convert your Edgebander from its standard Glue Pot system to PUR Slot Die Extrusion system usingVALCO MELTON'S HOT MELT/PUR EXTRUSION SYSTEM With up to 60 mm wide Glue Line Coverage The "IsoMelt Mini" melting tank is used for this proposal, it will be able to melt and pump around 10 Lbs of adhesive per hour. The IsoMelt Mini has a completely enclosed reservoir, which seals off the PUR from moisture in the atmosphere. To ensure that no moisture enters the reservoir, there is a small PLC program that injects dry air on a timed basis into the reservoir. The external MCP-6 pattern controller will process the photo-eye input and encoder signal measuring the machine speed. The pump will deliver adhesive to the head. A sensor mounted upstream from the applicator head will "see" the edge of the board coming through the system and triggers the valve to fire at the appropriate time and shut off at the appropriate time, ensuring that glue is accurately placed. An encoder is included for the speed feedback necessary for precise pattern placement. The head itself will need to be mounted in place of your current glue pot.Should you decide to go with this solution, we will provide you with drawings of the mount to make sure there are no issues with the fit before we take your machine down for the install.Also to expedite frequent changeover of part thickness and the importance of machine up-time, this proposal includes the motorized part thickness adjustment. It eliminates the need for operators to adjust the coating width on each setup.Components Required:1 946XX052 IsoMelt Mini, 4 cc/rev pump, 53 Lbs (24kG)/Hr, 2 exit NI1201 968XX167 Clearcut 60 edgebanding head (adjustable up to 60 mm wide)1 N/A Motorized option for edgebanding head including. . . 988xx894 controller, 912xx860 cable kit, 912xx027 unit communication cable1 988XM859 Uni-Flow Pneumatic Control for IsoMelt Mini1 913XX876 NV-10A level sensor board1 913XX513 Level sensor M30X1,51 780XX149 Heated hose, 2300/3000 Series,1/2-inch X 16-ft, 240 V1 074XX056 MCP-6 pattern control1 155XX341 1000 Pulse Encoder Kit (rigid encoder bracket)1 029XX511 Encoder splitter, Y-adapter to D series hot melt unit1 030XX632 Encoder cable, 8 m, 8-pin DIN1 280XX256 Fixed-field sensor, 4-inch (100-mm) range, with 581XX484 mounting bracket1 030XX596 Scanner cable, 10 m, flying leads 1 030XX882 Valve cable, 10 m, female reverse key to flying leads1 799XX716 Tank fittings kit, qty 2, straight #8 hose core1 799XX713 Tank fittings kit, qty 2, 45-degree #8 hose core 10 795XX550 InsulationPrice is for all of the items required to convert your Edgebander to an efficient PUR machine. Labor prices not included.

VANTEDGE MM 6.0 9 C-MOTION Edgebander with Pre-milling & Corner Rounding (EVA & POLYOLEFIN adhesive ready).Specifications: -- 10" Color Tough Screen PLC. The PLC controls all work units and the adhesive thermostats with 1-touch Icon Programmable selections, Photo Indicator Alarms to easily troubleshoot, and Swivel Control Panel.Tape and Panel Infeed System: -- 750 mm Coil support table, heavy-duty large solid polished steel panel in-feed fence guide system, Large industrial digital adjustment for the Pre-Mill panel material removal amount. Top Pressure Beam Adjustment: -- Automatic adjustment from the PLC control, Red LED panel feed indicator light for correct panel spacing, Pneumatic Pop Up Stop system -- Working Capacity: Edgebanding thickness, 0.4 - 3 mm capacity. Min. panel width 85 mm (3.3"); min. panel length 125 mm (4.9"); panel thickness 10 - 50 mm (0.39" - 1.96"), Edge Height 55 mm (2.2").Equipped With: -- Dual 3 HP Pre-milling Motors w/Diamond Cutter Heads, Misting Unite w/Large Dual Dust housing ports to help clean the Pre-Milling system, quick change Glue Reservoir and Pressure Section/Infrared Heat Lamp system; consists of Heavy Duty Guillotine to cut 3 mm coil materials, (4) pneumatic polished Pressure Rollers with manual digital adjustment to edge thickness, (1) Rubber Infeed Tape Roller, (1) Metal Infeed Tape Roller; Direct Universal Drive system - NO Chains. Unit with "Auto-set" automatic intervention, Strip & Coil Edge magazine, automatic shear type guillotine. -- Hot-Melt Glue System: Teflon-coated glue pot, digital thermostats with automatic kick-down when the machine is in idle mode.Workstations:End Trimming Unit: -- Dual 0.5 kW (.67 HP) high-frequency End Trim motors on precision "Auto Lube" Linear Guideway. 90 to 10° pneumatic tilt cut adjustment. Electronic sensors to safely monitor motor positions. Thumb screw pneumatic adjustments for simplicity. Tilting Super Finish Top & Bottom Trimming Station: -- Dual High Frequency 0.65 kW (.75 HP) motors with Combi Finish insert tooling, Top Servo-driven positioning of motors for different edge trimming profiles & positions. Corner Rounding Unit: -- Motors on precision billet aluminum swing tracer arms with pneumatic guidance and Face Copy system. The (2) independent motors can be adjusted to match tape thickness via digital scales. Profile Scraping Unit: -- Top, Bottom & Side Copy wheels to properly follow your panels edge, Triple Copy System for panels with blind Dados & Hinge cup holes., digital adjustment for fine-tuning the unit to the proper tape thickness. -- Flat Scraping Unit: Large copy wheels, Insert tooling, adjustable panel spray mist cooling & cleaning system for special materials and composites, adjustable dual Buffing Wheel system, Dual Hot Air Blowers. Buffing Unit: -- Top & bottom Buffing Unit, 0.5 HP (0.37 kW) - 2,800 RPM motors), units tilt 0° - 30°.Complete With: -- Insulated sound enclosure overall trim stations with a split dust hood,

VANTEDGE - MM 6.5, ...Edgebander w/Premill & Corner Rounding + EVA & Polyolefin Adhesive ready. -- Specifications: Working Capacity: Edgebanding thickness 0.4 - 3 mm coil stock capacity & 10 mm strip capacity.Min. panel width 85 mm (3.3"); min. panel length 125 mm (4.9"); panel thickness 10 - 60 mm (0.39" - 2.36"). -- Tape and Panel Infeed System:750 mm Coil support table; adjustable track feed speed 14, 16 & 20 MPM (66 FPM).Heavy-Duty large solid polished steel panel infeed fence guide system.Large industrial digital adjustment for the Premill panel material removal amount. -- Top Pressure Beam Adjustment: Automatic adjustment from the PLC control; pneumatic Pop-Up Stop system.Red LED panel feed indicator light for correct panel spacing. Equipped with: -- Dual 3 HP Premilling motors w/diamond cutterheads; pneumatic "JUMP In/Out function.Misting unit prior to Premilling; large dual dust housing ports to help clean the Premilling system.Quick change Glue Reservoir for EVA & PO glues; Pressure Section/Infrared Heat Lamp System.Heavy-Duty automatic shear type Guillotine with: "Auto-Set" automatic intervention for strip & coil materials.(4) Pneumatic polished Pressure Rollers with manual digital adjustment to edge thickness.(1) Rubber infeed Tape Roller, (1) metal infeed Tape Roller; direct Universal Drive system - NO Chains. Teflon-coated glue pot; digital thermostats with automatic kick down when the machine is in idle mode.Workstations: -- End Trimming Unit: Dual 0.5 kW (0.67 HP) high frequency End Trim motors on precision "Auto Lube" Linear Guideways; 90° to 10° pneumatic tilt cut adjustment. Electronic sensors to safely monitor motor positions; thumb screw pneumatic adjustments for simplicity. -- Tilting Super Finish Top & Bottom Trimming Station: Dual High Frequency 0.65 kW (0.75 HP) motors with Combi Finish insert tooling.Top Servo driven positioning of motors for different edge trimming profiles & positions. -- Corner Rounding Unit: Motors on precision billet aluminum swing tracer arms with pneumatic guidance and Face Copy System. (2) Independent motors can be adjusted to match tape thickness via digital scales. -- Profile Scraping Unit:Top, bottom & side Copy Wheels to properly follow your panels edge. -- Panel Nesting System: Triple Copy System for panels with blind dados & hinge cup holes.Digital adjustment for fine-tuning the unit to the proper tape thickness. -- Flat Scraping Unit: Large copy wheels. -- Buffing Unit: Top & bottom Buffing Unit; 0.5 HP (0.37 kW) - 2,800 RPM motors; units tilt 0° - 30°. -- Dual Hot Air Blowers:To reembellish edge materials. Operator Interface10" Color touchscreen PLC with swivel Control Panel.The PLC controls all working units & the adhesive thermostats with 1-touch icon programmable selections.Photo indicator alarms to easily troubleshoot errors/issues. -- Complete with: Insulated sound enclosure over all Trim Stations with a split dust hood, viewing windows, and industrial lights.Panel jog b

VITAP - ECLIPSE 2.0, ...Semiautomatic Contour (Curved Panel or Round Tables) EdgebanderSemiautomatic Contour Edgebanding and Trimming for Panels including: -- Concave shaped panels. -- Convex shaped panels. -- Straight panels.(3) Methods of Operation: -- Manual: Via the use of a foot pedal control for the guillotine. -- Laser: By entering the length of the desired dimension into the PLC, the guillotine will engage automatically. -- Smart Laser: Guillotine engages automatically when the high-definition laser detects the starting point of the applied edgeband with no need to measure/enter the length.Standard Specifications: -- High productivity and flexibility. -- Application for big and small shaped panels. -- Reinforced hinged holding arm with vacuum table to hold large pieces for edging and trimming. -- Color touch screen HMI 7";.(4) Control Pedals: -- Pedal to start the automatic feeding and manually engage guillotine. -- Pedal for slowing down the feed to process tight radii (turtle speed). -- Pedal for opening/closing the trimming head. -- Pedal to engage suction table vacuum.Glue Station: -- Teflon coated glue pot with 1 kG / 2.2 Lbs capacity. -- Quick disassembly system. -- Supports PUR or EVA Hotmelt Glue. -- Amount of glue applied is adjustable., -- Programmable glue temperature. -- Automatic guillotine for edgebands up to 3 mm x 45 mm. -- (2) Side rollers to follow the contour of the workpiece. -- Bottom support roller tilts after edgebanding for easy release of the panel. -- Variable speed for turtle speed adjusted by potentiometer.Laser for an automatic speed adjustment for complex panel shapes with the help of a potentiometer. -- Utilizes 2 x 800 W heating elements with a thermoregulator and electronic temperature control.Trimming Station: -- Trimming unit with: (2) Motors, approx. 0.5 kW / 0.7 HP high frequency, 15,000 RPM motors. -- Upper, lower, and front contour copy rollers, -- Auxiliary working table that can be raised for trimming small pieces. -- (2) Brazed cutters: R=3, Z = 6. -- Trimming Station with: Pneumatic tilting to allow trimming of big pieces.Technical Data: -- Dimensions of the machine: 2,000 mm (6’-6";) x 2,000 mm (6’-6";) x 1,700 mm (5'-7";). -- Weight: 600 kG/1,323 Lbs. -- 10 - 60 mm Panel thickness range. -- 1 - 3 mm Band thickness range. -- 13 - 64 mm Band height range. -- Connection data: 230 V, 3-Phase, 60 Hz.

VITAP RC 92 Semi-Automatic Top & Bottom Edge Trimmer – New, Never Used!Specifications: -- For straight & curved edgebanded panels. -- Max. edge thickness 3 mm (0.12"). -- Panel thickness 10 - 60 mm (0.39" - 2.36"). -- Table size 27" x 31".Equipped with: -- (2) 0.55 kW (0.7 HP) - 12,000 RPM Spindle motors. -- Large dia. guide bearings to ensure precise trimming of edges.NOTE: Sold "As-Is" Without Warranty!

For pre-glued PVC, veneer, & melamine laminate coil stock; 0.4 - 1.2 mm edge thickness and up to 35 mm panel thickness cap., automatic coil feed. -- Equipped with: Electronically controlled temperature setting for hot air blower, 3,000 watts for up to 650° F temperature, (1) Min heat-up time. -- Guillotine type front & rear end trim (with fast speed, flying knife), top & bottom flush trims with single motor drive to cutterheads. -- Overhead belt type feeder, 16 FPM feed speed. - Mounted on machine base with panel support table.