Moulders For Sale

Wadkin 5 hd Moulder, 480v, 9in W Capacity

WADKIN "GA-220" 5-Head Feed Through MoulderSpecifications: -- 5-Head, with 8-5/8" x 4-5/8" cutting capacity (220 mm x 120 mm) -- 40 mm Spindle diameter with cutterhead speed of 6,000 RPM. -- Head sequence: Bottom 10 HP, Right 7-1/2 HP, Left 7-1/2 HP, Top 15 HP, Bottom 10 HP motor. -- 2 HP variable feed speed 19 to 72 FPM, chain drive. -- Currently wired for 460 Volt, 3-Phase power.

Wadkin GA 5363 5 Head Moulder

7 Spindle Moulder with Manual Bed Lubrication 6000 RPM Spindle Speed 19-91 F/Min Feed Speed Will Take 7" x 5" Lumber Specs: 1ST BOTTOM--7.5 HP 1ST FENCE SIDE--7.5HP 1ST LH SIDE--10HP 2ND FENCE SIDE--7.5 HP 1ST TOP-15HP 2ND BOTTOM-10HP UNIVERSAL-7.5 HP FEED DRIVE--3 HP BEAM LIFT--.5 HP

WADKIN GD 220 6-Head Feed Through MoulderSpecifications: -- Working capacity: 230 mm W x 130mm H (9.06" W x 5.12" H) Timber admitted, 220 mm W x 120 mm H (8.66" W x 4.72" H) Finished timber. -- Head Sequence: Bottom 7-1/2 HP, Right 7-1/2 HP, Left 7-1/2 HP, Top 15 HP, Bottom 10 HP, & Universal 7-1/2 HP. -- Spindle dia. 40 mm (1.57"), Spindle speed 6,000 RPM. -- Variable feed speeds 6 - 22 MPM (20 - 72 FPM).Equipped with: -- Right, Left & Top heads with Mechanical digital readouts. -- 1/2 HP Motorized feed beam, 2.2 kW Feed motor, 3 HP Cardan drive, Reverse feed, 5-1/2" Dia. Hardened & Chromed steel feed rollers up to top head, 2" x 2" Polyurethane feed rollers after top head, All feed & pressure rollers move with rise & fall of feed beam. -- 2 M (78.74") L Infeed straightening table. -- Manual bed lubrication. -- Sound enclosure.

Model GD-220-5 220 volt three phase, 60 hz, 67 amps Max workpiece admitted 230 mm x 130 mm (9" x 5") Max workpiece finished size 220 mm x 120 mm (8.66" x 4.72") 10-1/2" wide x 77" long adjustable height infeed table 1" high adjustable infeed fence 40mm Spindle dia. - 1st head: bottom horizontal spindle 7-1/2 hp, 208-230/460 volt three phase drive motor - 2nd head: right hand vertical spindle 7-1/2 hp, 208-230/460 volt three phase drive motor - 3rd head: left hand vertical spindle 7-1/2 hp, 208-230/460 volt three phase drive motor - 4th head: top horizontal spindle 15 hp, 208-230/460 volt three phase drive motor - 5th head: bottom horizontal spindle 10 hp, 208-230/460 volt three phase drive motor cardan feedworks Mechanical digital readouts on chip breaker and axial adjustments Sound and safety enclosure with lift up hood around all heads Interior cabin work light 3 hp, 208-230/460 volt three phase feedworks drive motor Variable speed feed with 20 to 75 ft/min range Push button motor controls

Manufacturer’s Specs Model GD-220-5 220 volt three phase, 60 hz, 67 amps Max workpiece admitted 230 mm x 130 mm (9" x 5") Max workpiece finished size 220 mm x 120 mm (8.66" x 4.72") 10-1/2" wide x 77" long adjustable height infeed table 1" high adjustable infeed fence 40mm Spindle dia. - 1st head: bottom horizontal spindle 7-1/2 hp, [208-230/460](tel:208-230/460) volt three phase drive motor - 2nd head: right hand vertical spindle 7-1/2 hp, [208-230/460](tel:208-230/460) volt three phase drive motor - 3rd head: left hand vertical spindle 7-1/2 hp, [208-230/460](tel:208-230/460)volt three phase drive motor - 4th head: top horizontal spindle 15 hp, [208-230/460](tel:208-230/460) volt three phase drive motor - 5th head: bottom horizontal spindle 10 hp, [208-230/460](tel:208-230/460) volt three phase drive motor cardan feedworks Mechanical digital readouts on chip breaker and axial adjustments Sound and safety enclosure with lift up hood around all heads Interior cabin work light 3 hp, [208-230/460](tel:208-230/460) volt three phase feedworks drive motor Variable speed feed with 20 to 75 ft/min range Push button motor controls

Great Condition 500 RPM Spindle speed 8 Head with jointers 1-13/16" Spindle Diameter, Belt Driven 2 bottom cutter heads with jointers-15HP/15HP 2 top cutter heads with jointers--20 HP/15HP 2 right hand cutter heads with jointers--10HP/10HP 1 left hand cutter head with jointer--10HP 1 universal cutter head--10HP

Six Wadkin moulders available. Have not been run in a few years. Selling all as one package. - (4) 4-Head machines - (2) 6-Head machines

Weinig U-17-AL 5 head moulder Bottom Right Left Bottom

WEING U 23 E "STANDARD" Feed Through Moulder; (6) Heads, (B-R-L-T-B-U), working capacity 9-1/16" x 6" profiling. -- Head Sequence: Bottom 10 HP, right & left by 15 HP, top 15 HP, bottom 15 HP and universal 15 HP motor. -- Spindle dia. 40 mm with cutterhead speed of 6,000 RPM; mechanical digital readouts on spindle adjustments for both axis, radial adjustment only on 1st bottom head. -- Motorized feed beam adjustment with independent adjustment of top heads, receding chip breakers on left and top heads. -- Tool cutting circles of 8-7/8", table plates adjustable to the cutting circle on vertical spindles with axial adjustment of 3-1/8" for multiple profiles. -- Feed motor 5 HP, variable speed from 18 - 118 FPM, overhead feed wheels with pneumatic pressure; (2) powered rollers in machine table. -- Infeed straightening table is 2 M (6-1/2') with adjustable fence & adjustable outfeed table; side pressure roller mounted to infeed table. -- Central lubrication, full sound/safety enclosure and manual bed lubrication pump. ALSO AVAILABLE: -- Weinig model 960 Grinder, sells new for approx. $35,000... Add $12,500 if purchased with the Moulder, -- CNC Template Maker, with scanner and DXF file capabilities, sells new for approx. $12,000... Add $3,500 if purchased with the Moulder.

1978 Weinig 7 Head Moulder S/N 2816/2248

Weinig U22N Moulder 7 head Mid 80s Freshe rebuild

This entire listing is being sold as one lot. 1997 Weinig U23EL 6-Head Moulder with infeed and outfeed decks 2000 Weinig R960 profile Grinder with Weinig 970080 Opticontrol Stand TF-900 Resaw Precision 281 chop saw Precision 281 RH chop saw Shanklin F2 wrapper Damark STR 16ADD heat tunnel Ogam 280 Rip Saw

2002 Weinig U23E 5-Head Moulder 2021 Doucet MFE-150-12 Infeed System This system is still in production and ready to be loaded out.

Weinig Unit 318 Moulder 9" Machine 6-Head Low hours! Also available: Weinig R960 Grinder and tool room

WEINIGUnimat500ClassicFeed Through Moulder; --5-Heads, working capacity 230 x 120 mm(9-1/16" x 4-3/4"). -- Head Sequence: Bottom4 kW (5.5HP), right& left4 kW (5.5 HP),top5.5 kW(7.5 HP), top 5.5 kW (7.5 HP), and bottom4 kW (5.5 HP) motor. -- Spindles: Dia.40 mm (1-9/16")with cutter head speed of 6,000 RPM;digital readouts on spindle adjustments in combination with the WEINIG MEMORY SYSTEM. Motorized height & width adjustment of spindles. Tool diameter 1st spindle min/max 125-145 mm (4-15/16" - 5-11/16"), other heads 112-200 mm (4-7/16" - 7-7/8"). -- WEINIG Powerlocktool holding system on top heads. -- Motorized feed beam adjustment with independent adjustment of top heads, receding chip breakers on left and top heads. --Variable feed speed5 to 30 m/Min (16-98 FPM), driven by 5 kW (7.5 HP) motor. Overhead feed wheels with pneumatic pressure. Cardan drive. -- MachineTables: Made of hardened steel. Infeed straightening table is 2,000mm (6.5') with adjustable fence & adjustable outfeed table; (1)side pressure roller mounted to infeed table. -- Complete with: WEINIGMEMORY SYSTEM-reduces set-up time by storing spindle positions and tool radii.Central lubrication. Full sound/safety enclosure with illumination inside. Manual lubrication pump. Automatic star delta starters. CE Compliance. (2) Emergency stop buttons. --Actual model is WEINIG Unimat500ClassicFeed Through Moulder; 6-Heads --Price mentioned is landed US port. ...we just added $5,000 to partially cover the extreme increase in Ocean freight. (...04/03/2022 JS). --Note:EX-FACTORY’s Logistic Department is experienced and setup to provide “Full Service Logistic"; from Overseas Suppliers to your Door. …Packaging, Container Loading, Ocean Freight, Marine Insurance (door to door), US or Canadian Customs, Duty and domestic shipping to your Plant Door.

WEINIG UNIMAT 818 S Feed Through Moulder 6-Head (B-R-L-T-T-B), working dimension 12-3/16" x 6- 5/16".Capacity: -- Working width 3/4" - 12-3/16" -- Working thickness 5/16" - 6-5/16" -- feed speed-variable with 10 HP inverter 20 - 200 FPM Head sequence: -- Bottom 25 HP, right 15 HP, left 15 HP, top 30 HP, top 30 HP, and bottom 30 HP motor; all motors with electronic spindle brakes. -- Spindle dia. 1-13/16" with cutter head speed of 6,000 RPM; -- outboard bearings on spindles #1, #4, #5 & #6. Electronic LED digital readouts for all spindlesJointer: -- Head # 1 Bottom straight jointer manual, remotely controllable with closed safety hood; Automatic stone adjustment; Maximum jointing width 12 -1/16"; With outboard bearing 4 3/4"; For tool circle 6 1/16"- 7-1/16" -- Head # 2 Right spindle Profile jointer automatic; For working height 4-3/4"; Remotely controllable with closed safety hood; Automatic stone adjustment -- Head # 3 Left spindle Profile jointer automatic; For working height 4-3/4"; Remotely controllable with closed safety hood; Automatic stone adjustment -- Head # 4 Top spindle straight jointer manual; remotely controllable with closed safety hood; Automatic stone adjustment; Maximum jointing width 12 1/16"; With outboard bearing 4-3/4"; For tool circle 6-1/16"- 7-1/16"Profile Jointer automatic; Remotely controllable with closed safety hood; Automatic stone adjustment; Maximum jointing width 9-1/16" without outboard bearing 4-3/4" -- Head # 5 Bottom spindle straight jointer manual; remotely controllable with closed safety hood; Automatic stone adjustment; Maximum jointing width 12-1/16"; With outboard bearing 4-3/4"; For tool circle 6 1/16"- 7-1/16"Profile Jointer automatic; Remotely controllable with closed safety hood; Automatic stone adjustment; Maximum jointing width 9-1/16" without outboard bearing 4-3/4" -- (4) Jointer cassettes for profile jointer, length 6" -- (2) Jointer cassettes for profile jointer, length 9" -- (1) Set of jointing stoneReadouts: -- Digiset (double mechanical readouts) for left and top radial adjustments. One readout is for the tool size and the other for the finished wood dimension (with Imperial inch adjustment -- Mechanical readouts on all other axes. Side pressure roller: -- (10) Driven feed roller shaft from above -- (5) Driven steel rollers in the machine table -- Axial setting range of the feed rollers opposite left spindle, 1-3/8" -- Extension of the feed shaft opposite the left spindle to 8 -1/4 in. -- Axial setting range of vertical spindle 3-1/8 in. Axial setting range of horizontal spindle 1 -3/4 in. (1st bottom 3/8 in.) -- All spindles diameter 1 -13/16" -- (6) Additional set of spacing collars, clamping length 6-11/16", diameter 1-13/16" -- Pressure shoe in front of 1st left spindle receding from tool, incl. lateral roller pressure, pneumatic -- Receding chip breaker in front of 1st top spindle, pneumatic. -- Pressure shoe in front of and guide after top spindle with mechanical digital displays

Weinig Unimat Gold - 6-Head Machine Weinig Rondamat R960 Grinder Includes: Tooling and approx (200) profiles from tool room