You Have Selected
18 Results Found for Go Fast Mfg LLC Viewing 1 - 18 of 18 results

Go Fast Mfg DD-79

The Go Fast DeDuster is the answer to sawdust left on boards. Material can be fed by hand or from an inline process into the machines hopper. An adjustable gate allows the rubber feed belt to pull the bottom board forward to the feed wheel and through the top and bottom rotating brushes. The two rotating stainless steel brushes sweep residual sawdust to the side, efficiently and effectively removing residuals. The boards exit through a set of pinch rollers which pull the board out of the machine. As the boards clear the gate, the next board drops and repeats the process. The Board Knocker System throws the stack backwards breaking frozen or stuck boards apart.
Go Fast Mfg LLC

Shiocton,WI
920-986-1173

Go Fast Mfg CS24

The Go Fast CS24 Chop Saw sets the standard for all other chop saws, by being safe and simple to operate, built tough to quickly chop lumber, cants and even cross-ties. Available in single, 3 phase, jack shaft ready and even gasoline powered. This saw delivers quick accurate cuts every time.
Go Fast Mfg LLC

Shiocton,WI
920-986-1173

Go Fast Mfg 6 x 8 Master Resaw

8" Wide Cutting Capacity Resaw: Every Go Fast Thin Kerf Band Resaw is Low Profile and built for Maximum Production with Minimum Investment. Available in Single and Multi-Head for Pallet Lumber, Slab Recovery, Fence Boards, EVEN Siding Shingles! Ships ready to saw! Do not hesitate. If you are in the market for the industrys best low cost, high profit resaw - CALL TODAY!
Go Fast Mfg LLC

Shiocton,WI
920-986-1173

Go Fast Mfg Go-Around Grade System

The Go Fast Thin Kerf Grade Resaw System is Low Profile and built for Maximum Production with Minimum Investment. This system comes complete with heavy built run-around conveyor, variable speed feed, quick adjust blade tracking and much more. Go Fast is Quite Simply THE MOST COST EFFECTIVE Thin Kerf Grade System available – PERIOD! Before you spend over $200,000 for a Thin Kerf Grade Resaw System, you owe it to yourself to compare. Ships ready to saw! If you are in the market for the industrys best low cost, high profit grade resaw system - CALL TODAY!
Go Fast Mfg LLC

Shiocton,WI
920-986-1173

Go Fast Mfg Stacking Rack

At Go Fast Manufacturing, we are pallet professionals who know what it takes to make YOU more profitable. That is why we designed the new Go Fast Stacking Rack with heavy duty hinged movable side walls. Many sizes available to fit your pallet pre-cut operation. Make perfect stacks of boards every time with a Go Fast Stacking Rack. The stacking rack is compact and still allows for banding when bundle is complete. Racks can be easily converted to a right or left application. For complete details call today.
Go Fast Mfg LLC

Shiocton,WI
920-986-1173

Go Fast Mfg DD-103

The Go Fast DeDuster is the answer to sawdust left on boards. Material can be fed by hand or from an inline process into the machines hopper. An adjustable gate allows the rubber feed belt to pull the bottom board forward to the feed wheel and through the top and bottom rotating brushes. The two rotating stainless steel brushes sweep residual sawdust to the side, efficiently and effectively removing residuals. The boards exit through a set of pinch rollers which pull the board out of the machine. As the boards clear the gate, the next board drops and repeats the process. An optional board knocker throws the stack backwards breaking frozen or stuck boards apart.
Go Fast Mfg LLC

Shiocton,WI
920-986-1173

Go Fast Mfg Twin Corner Notcher System

The New Twin Corner Notcher from Go Fast Manufacturing, is a must have for custom pallet builders. Quickly and accurately make two notches that allows vertical stakes for stacking, strengthens custom shipping boxes and many other custom pallet requirements. If you build custom pallets, this machine will save you time and make you money by adding another unique service you can provide. The Twin Corner Notcher is fast, easy to operate and can be designed to fit your customer’s needs. For more information use the email form attached.
Go Fast Mfg LLC

Shiocton,WI
920-986-1173

Go Fast Mfg DET-20

The New Double End Trimmer from Go Fast Manufacturing, is a fast acting, adjustable head system that can process up to 72” long material. Our standard double end trimmer comes with 20” carbide blades and strong 5 HP motors to handle everything from lumber to cants. Each double end trimmer can be customized to fit your specific requirements for maximum and minimum length and various thicknesses. For more information use the email form attached.
Go Fast Mfg LLC

Shiocton,WI
920-986-1173

Go Fast Mfg 6x12 Master Resaw

12" Wide Cutting Capacity Resaw: Every Go Fast Thin Kerf Band Resaw is Low Profile and built for Maximum Production with Minimum Investment. Available in Single and Multi-Head for Grade, Pallet Lumber, Slab Recovery, and Fence Boards! Ships ready to saw! Do not hesitate.
Go Fast Mfg LLC

Shiocton,WI
920-986-1173

Go Fast Mfg 6x6 Master Return Resaw

6-1/2 Wide Cutting Capacity Automatic Return Resaw: The innovative new Powered Belt Return is self-adjusting and offers operators the ability to fine-tune the return belt height and angle to fit your specific mix of products. When setting the sawblade to the desired board thickness, the feed belt conveyor, and the return belt are all simultaneously adjusted to maintain optimum height for peak performance. In addition, the return belt and landing table are also fully adjustable to allow operators to set cant return angles, decreasing operator fatigue and increasing both speed and productivity. Available in Single and Multi-Head Configurations.
Go Fast Mfg LLC

Shiocton,WI
920-986-1173

Go Fast Mfg FW-16

The Go Fast Firewood Wrapper is the perfect solution to Banding firewood bundles. These machines can quickly stretch-wrap bundles of firewood. A self adjusting mechanism tensions the wrap to ensure tight bundles and maximum wrap usage. Simply stack your bundle, hold the wrap across the wood bundle, hit the foot pedal, and you have a bundle wrapped in under 15 seconds!
Go Fast Mfg LLC

Shiocton,WI
920-986-1173

Go Fast Mfg D3 Series

The Go Fast Triple Side DeDuster is the answer to sawdust and stringy material left on boards. Not only does it de-dust boards, this compact machine de-burrs stringy material off the sides of boards. The boards enter on the feed belt and push against a pressure plate, automatically indicating to the machine what width material is entering. An adjustable gate allows the rubber feed belt to pull the bottom board forward into the holdover wheel and past the side de-burring brush, which removes any stringy material from the side of the board. The hydraulic powered hold-over wheel automatically adjust between 3-1/2" and 6-1/2" board widths and drives the boards into the in-feed pinch wheel, through two rotating brushes, and out of the out-feed pinch wheel. The two stainless steel brushes sweep residual sawdust to the side. As the boards clear the gate, the next board drops and repeats the process. The Board Knocker System throws the stack backwards breaking frozen or stuck boards apart.
Go Fast Mfg LLC

Shiocton,WI
920-986-1173

Go Fast Mfg 2NX - Double Head Notcher

The new Go-Fast Double Head Notcher is a simple and heavy duty Notching machine. Quickly notch boards, recycled material, entire cants, and even un-notched pallets with the cogged chain infeed system. This notcher comes standard with variable infeed speed that is adjustable from 0 – 44 FPM with the turn of a knob. (Coming soon: Inline Automatic Double Head Notcher)
Go Fast Mfg LLC

Shiocton,WI
920-986-1173

Go Fast Mfg FWT-20 Slab/Firewood Trim Saw

Introducing the NEW Go Fast Manufacturing Slab/Firewood trim saw. Do you need to get rid of piles of wasted slabs? Now you can! Turn your waste wood and unusable slabs into valuable firewood quickly and easily. The Go Fast FWT-20 is built to be a heavy duty, safe, and a high production machine. These multi-head saws are custom built to your needs. CALL TO INQUIRE TODAY!
Go Fast Mfg LLC

Shiocton,WI
920-986-1173

Go Fast Mfg Model-H Pallet Stacker

Make perfect stacks of pallets ready to ship. The Go Fast Pallet Stacker is accurate and easy to operate. A simple chain infeed system allows the operator quickly insert the pallets with minimal effort. The air powered lift station ensures that your pallets lift smoothly and stack straight.The Model H pallet stacker features air and electric operation in a fixed design. These machines offer a smaller footprint than many other available pallet stackers. They are available with single or multiple pallet stacking bays.
Go Fast Mfg LLC

Shiocton,WI
920-986-1173

Go Fast Mfg Material Handling Equipment

Go Fast Manufacturing designs and fabricates a variety of material handling equipment. Tell us what you want and we will build it. Round tables, belt conveyors, chain conveyors, rollers decks, and more! Heavy-Duty or Light-Duty equipment, Go Fast can do it all.
Go Fast Mfg LLC

Shiocton,WI
920-986-1173

Go Fast Mfg TS14

NEW FROM GO FAST!! The TS14 Trim-Saw is a compact, heavy duty, and simple machine for trimming boards to size. Its movable length stops are quick to adjust, allow for multiple simultaneous sizes, and are easy to use. With 3 X 3 steel tube framing and a 1-1/4” blade arbor, the TS14 is simply built to last!
Go Fast Mfg LLC

Shiocton,WI
920-986-1173

Go Fast Mfg NXL Notcher

The NXL Single Head Notcher is a compact, heavy duty, and safe machine for cutting notches into a variety of materials. With a strong 20HP motor and a simple pneumatic system, notching has never been easier. Extra hand guarding and a stationary control station help make this machine a safer addition to any operation.
Go Fast Mfg LLC

Shiocton,WI
920-986-1173