You Have Selected

30 Results Found for Biomass Viewing 1 - 20 of 30 results
STANDARD LISTINGS
Our quality wear parts are designed to save you money. Many of our forged bolt on tips have rails or saddles. The key feature is they help to protect the hammer neck, orientate the tip on the neck and reportedly prevent the tip from twisting on the hammer. Specs for the F tip taken from back: Length: 4-3/8" Width: 2-5/8" Center to Center: 1-3/4" Rail to Rail: 2" Bolt: 3/4"
Part Number:
Apollo Equipment
800-982-2844

Duramax V2 Vermeer

Call for Price
Our quality wear parts are designed to save you money. Many of our forged bolt on tips have rails or saddles. The key feature is they help to protect the hammer neck, orientate the tip on the neck and reportedly prevent the tip from twisting on the hammer. Secifications From the Back of Tip: Length: 3" Width: 2-9/16" One Bolt Hole Takes 7/8" Bolt Rail to Rail: 1-59/64"
Part Number:
Apollo Equipment
800-982-2844

Duramax MBT Morbark

Call for Price
Our quality wear parts are designed to save you money. Many of our forged bolt on tips have rails or saddles. The key feature is they help to protect the hammer neck, orientate the tip on the neck and reportedly prevent the tip from twisting on the hammer.
Part Number:
Apollo Equipment
800-982-2844

Duramax MBJR Morbark

Call for Price
Our quality wear parts are designed to save you money. Many of our forged bolt on tips have rails or saddles. The key feature is they help to protect the hammer neck, orientate the tip on the neck and reportedly prevent the tip from twisting on the hammer. Specs for the MBJR from the back: Length: 3-39/64" Width: 2-15/16" Center to Center: 1-1/2" Bolt size: 3/4" Rail to Rail Distance: 2-1/16"
Part Number:
Apollo Equipment
800-982-2844
Fixed hammers are typical double rod hole hammers with carbide or hardfacing on the neck. We manufacture fixed hammers ranging from 1" to 5" thick material (usually T-1) Forged Hammers are also available in select styles. Specs for two rod hole fixed hammers: Size: Ranges from 1" to 5" Material: most typically T1, Forged is available in select styles. Also available with Carbide or Hardfacing for added durability.
Part Number:
Apollo Equipment
800-982-2844

Duramax Bandit B. Hammers

Call for Price
Attached to the rotor and designed for one Bandit Beast tooth / insert, Carbided on the leading edge and hammer top. Also available in other styles and thicknesses. We have a wide assortment of Bandit Beast wear part products : screens, tips, bolts, nuts, holders, “bunny ears” and more.
Part Number:
Apollo Equipment
800-982-2844

Duramax Answer Hammer

Call for Price
Manufactured by Grinder Wear Parts in 3" and 2.5" neck sizes for use on your CBI models 3000, 4000, 4800, and 6800.
Part Number:
Apollo Equipment
800-982-2844
Vermeer style hammers for your 8000 - 9000 machines. These hammers are manufactured by Grinder Wear Parts in Oregon and Florida.
Part Number:
Apollo Equipment
800-982-2844
Bell Style swing hammer wear part with carbide, also available with hardfacing. Custom orders are welcome.
Part Number:
Apollo Equipment
800-982-2844
Swing Hammers are also manufactured with two rod holes such as the "Rectangle Style" hammer pictured above. Rectangle swing hammer can be reversible, with carbide as well. Custom orders are welcome.
Part Number:
Apollo Equipment
800-982-2844
Bandit Beast teeth assortment Bandit Beast Bullet tooth carbided Bandit Beast Shingle tooth, brazed on carbide Bandit Beast Cutter tooth, brazed on carbide
Part Number:
Apollo Equipment
800-982-2844
Peterson Pacific shear pins are available in several "breaking-shear" strengths. Quality wear parts from Grinder Wear Parts.
Part Number:
Apollo Equipment
800-982-2844
Available in all forged bolt on tips
Part Number:
Apollo Equipment
800-982-2844
Our forged tip insert carbide tip wear part offer the biggest bang for the buck! Typically, most tips wear at the corners first and the corner buttons help to reduce wear and increase performance at a low cost.
Part Number:
Apollo Equipment
800-982-2844
6 WELD TOP Tungsten Carbide weld patterns on all our bolt-on forged tips with corner buttons: Typically, most tips wear at the corners first and the corner buttons help to reduce wear and increase performance at a low cost. Tungsten Carbide weld patterns are on all our bolt-on forged tip wear parts.
Part Number:
Apollo Equipment
800-982-2844
Wide assortment of screens available for most tub and horizontal grinders. Morbark, Vermeer, Diamond Z, Peterson Pacific, Hogzilla, Duratech, WHO, Toro, Pro-Grind and more!
Part Number:
Apollo Equipment
800-982-2844
These wear parts are manufactured with three passes of carbide with corner buttons. Commonly supplied from 1.5” to 2” thick material. Available for all CBI grinders using the striker. Duramax Striker Plate for your CBI 4800 - 1.5” Thick with Carbide.
Part Number:
Apollo Equipment
800-982-2844
Scarab Flails and Paddles for Compost Turners. Our Scarab carbided paddle for compost turners. Scarab carbided paddle wear part
Part Number:
Apollo Equipment
800-982-2844
Bartlett's Saw only sells, Tylertown Wear Parts, the finest chipper parts available. The standard vertical carbide anvil is available for Bush, Morbark, Progress, Precision, Soderhamn chippers. Tylertown Wear Parts manufactures most of the wear parts for conventional chippers. All parts are manufactured within the tolerances of the OEM's specifications. If you don’t see the part you need here, or you’re having problems with your chipper – Call Bartlett’s Saw Service at 270-827-4289
Part Number:
Bartlett's Saw Service
270-827-4289
Bartlett's Saw only sells, Tylertown Wear Parts, the finest chipper parts available. Tylertown Wear Parts manufactures most of the wear parts for conventional chippers. All parts are manufactured within the tolerances of the OEM's specifications. If you don’t see the part you need here, or you’re having problems with your chipper – Call Bartlett’s Saw Service at 270-827-4289
Part Number:
Bartlett's Saw Service
270-827-4289