574-825-0704
Bright Star works for you and your best interest when liquidating your sawmill, logging or pallet company equipment. We provide general auction & liquidation services. Ask about our risk free options.
36 Results Found
574-825-0704
AUCTION ITEM
AUCTION ITEM
#120 • 2018 CAT 559D Knuckleboom Log Loader SN: KL500216. Meter reads: 7,510 hours. Engine: C4.4. Grapple: CAT 55, SN: GL200342. Delimber: CTR 426. Trailer: 2019 Pitts KB50-DHL-CC hydraulic trailer, VIN: 5JYKB5026KPP13031. Tire size: 11R-22.5. Features and Notes: Good running machine! Operates as it should and ready to go to work in the woods. Normal wear for age and hours. Bucksaw is included! Contact Carl with any questions 540-875-7536. Location: 7816 Fishing Creek Valley Rd, Harrisburg, PA 17112
AUCTION ITEM
AUCTION ITEM
#110 • 2018 Cleereman 3HB Carriage (1st of an entirety) SN: 38-1078-16, Model: 38, 110V over air controls, 7'6" x 14' overall dimensions, wheels 54" center to center, pantograph arms, Brownsville turners, track oiler
AUCTION ITEM
AUCTION ITEM
#200 • Cornell Single Arbor Edger-Gangsaw Model: E760, SN: E760-0016-97, 2 moving saws, 60" wide infeed, edger 28" wide, gangsaw 28" wide, 3 1/2" collars, 2" collars, 1 1/2" collars, 1 1/4" collars, side press roll on gang side, control box, no power, 6" x 16' tailing belt on edger side, 27" x 16' tailing belt on gang side
AUCTION ITEM
AUCTION ITEM
#100 • 2000 HMC V216 Rosserhead Debarker Model: V216. SN: 1740-00. Drive on the head: Electric. Head type: Steel. Width of head: 12". Debarker HP: 40hp electric. Chain drive: hydraulic power. Includes barn sweep: No. Pantograph: Cable. Cab: Yes, size: 4' x 4'. Controls: Yes, type: Pilot Joystick plus lever and foot petals. Features and Notes: Will be using till sale time, 14' outside of wheel, no support structure, slant track.
AUCTION ITEM
AUCTION ITEM
#200 • HMC V-216H Rosserhead Debarker (1st of an entirety) SN: 1203-79. Drive on the head: Electric. Head type: Rosserhead steel. Width of head: 12". Debarker HP: 30. Cable drive: Yes. Includes barn sweep: No. Overall size: 32' long x 8' wide. Cable: Yes. Controls: Yes, hydraulic lever. Features and Notes: Slant track, controls in cab, 42" x 42" x 6' cab, 3" x 26" bull wheels with new cleats welded on, 14' outside bull wheels, includes steps and catwalk.
AUCTION ITEM
AUCTION ITEM
#2500 • Hood 24000 Knuckleboom SN: 243701. Meter reads: 3,503 hours. Engine: 6 cylinder Cummins. Fuel type: Diesel. Continuous Grapple: Yes, Rotobec 4642. Trailer: Yes. Delimber: No. Bucksaw Hookups: Yes. A/C: No. Heater: No. Tire size: 11R24.5. Features and Notes: Runs and operates. Contact Myron Nissley with any questions 574-536-2481
AUCTION ITEM
AUCTION ITEM
#400 • 2011 Wood-Mizer Portable Band Mill SN: WM3500D1201100354. Meter reads: 4,675 hours. Powered by: 30 hp electric. Hydraulic: Yes, fully hydraulic. Setworks: Yes, Wood-Mizer. Debarker: No. Bed extensions: No. Log capacity: 14' bed. Throat capacity: 32". Extra wide head: Yes. Stationary control system: Yes. Fine adjustment outriggers: Yes. Features and Notes: 14' bed, owner has cut 21' logs, up to 48" diameter, operator's cab with heat/AC unit, Joystick controls, 1 1/2" bands, chain turners, loading arms, new extra brake for setworks drive, 20' x 6" flex hose, approx.100 used one time bands 1 1/2" x .055 x 195"
AUCTION ITEM
AUCTION ITEM
#100 • Woodland Industrial Modular Band Mill Pulls with 2" ball, no trailer axles included, 8' x 31' long overall, 1 1/2" x 24" band wheels, 1 1/2" band fully hydraulic mill, 3 cylinder Toyota diesel engine on head, 4 HB, 26" HBs, (2) 18" push up log turners, 15' long log holding carriage, 4 arm log loader, 3 cylinder Lister Petter diesel for running on board edger and track/carriage/log loader arm, 8" x 18" 2 blade edger with (2) 10" blades, hydraulic controls; includes all hydraulic lines, pumps, and lines to and from motor
AUCTION ITEM
AUCTION ITEM
#447 • 2008 Bobcat S175 Skid Steer SN: 525215237. Meter reads: 3382 hours. Engine: Kubota 2.2L. Fuel type: Diesel. ROPS: Yes. Controls: Hand and Foot. Highflow: Yes. Attachments: 66" bucket. Features and Notes: Runs and operates good
AUCTION ITEM
AUCTION ITEM
#449 • CAT DP40K1 Forklift SN: AT19C01675. Meter reads: 4308 hours. Engine: 6 cylinder diesel. Fuel type: Diesel. Load capacity: 8000 lbs. Stage mast: 3. Mast height: 85". Reach height: 21'. Side shift: No. Fork positioner: No. ROPS: Enclosed. Tire size: (front) 8.25-15, (rear) 7.00-12. Tires: Solid. Features and Notes: Runs and operates.
AUCTION ITEM
AUCTION ITEM
#256 • CAT 926E Wheel Loader SN: 94Z03144. Meter reads: 40,830 hours. Engine: 4 cylinder CAT. Fuel type: Diesel. ROPS: Enclosed cab. 3rd Valve: Yes. Center to center of pins: 27". Tire Size: 17.5-25. Attachments: Grapple forks, 6" x 42" forks, 80" wide. Heater: No. A/C: No. Quick Attach: No. Features and Notes: Has AC unit-condition unknown. Front passenger tire is not mounted to rim, will need to be repaired before loading or operating. Starts and runs
AUCTION ITEM
AUCTION ITEM
#404 • 1999 Challenger Grinder Model: CH20040455, SN: 0999H0196, recent new cutter bits, 24" x 20' infeed vibrating conveyor, 5' fiberglass section, MDI metal detector with controls, variable feed drive on infeed with amp sensing reverse, 60 hp electric on head, feed rolls re-edged recently
AUCTION ITEM
AUCTION ITEM
#128 • Corley 648 Edger SN: EH-648-016 (8687), 8" x 48" capacity, 80" x 9'6" infeed rolls with 3 strand 2-way transfer, air cylinders on pop-ups control panel, has laser lights, 60 hp electric motor, (2) 18" blades 1 moveable, includes electrical control panel, 6" x 24' tailing belt
AUCTION ITEM
AUCTION ITEM
#215 • Cornell Gang Edger SN: 706-12-81MHE-42, 46" x 7' infeed table, 21" edger capacity, side press roll, 6" x 16" gang capacity, one moving saw, 61" x 92" outfeed table, includes 2 laser lights, no power, NJS automated setworks
AUCTION ITEM
AUCTION ITEM
#121 • Cornell Edger Gang Saw SN: HD4267035, SN: HD42670352-01, 21" edging capacity, 2 moving saws, 20" saws, only used as edge, 4' x 7' infeed table, 5" x 9' tailing belt with side drop, 2 laser lights, control box, hydraulic drive, support to ground
AUCTION ITEM
AUCTION ITEM
#115B • Detroit Diesel Series 60 Power Unit Meter reads: 9,810 hours. Control box in sawyer cab, electronic controlled, PEC clutch model CB3-14-A32X
AUCTION ITEM
AUCTION ITEM
#127 • 2022 Helle Double End Trimsaw SN: 202062, 1 moving saw, computer set, hydraulic on saws, 24" x 25' scrap belt, 7" x 18' capacity, includes stairs and platform
AUCTION ITEM
AUCTION ITEM
#406 • Hershberger Slab Saw Mechanical automatic slab saw, 30" blade, 19" x 9' infeed belt, 22" x 4'4" off bear belt, new material for belts, 10 hp 480V motor, (2) 31" blades included
AUCTION ITEM
AUCTION ITEM
#206 • HMC 3HB Carriage (1st of an entirety) Model: AC-4D, SN: 375-85, 110V over air controls, electric drive setworks, electrical control box, control in cab, pantograph, 4 axles, 6'6" x 14' overall dimensions
AUCTION ITEM
AUCTION ITEM
#452 • JCB Telehandler SN: 506B0SL0574262. Meter reads: 4,856 hours. Engine: Perkins 4 cylinder. Fuel type: Diesel. ROPS: Enclosed. Max reach: 30'. Fork size: 5" x 42". Features and Notes: One flat tire, 4 wheel steer, owner has new seal kit for main cylinder, 3 way steer, door is missing, quick attach forks, fork side tilt. Location: 1103 County Route 5, Addison, NY 14801