Chain deck 5 HP hydraulic power pack

Complete chip mill operation. All machinery will need to be moved from the current facility. System includes: - 29'x11' Log Deck - Emergency log Deck - 50' Log Infeed Conveyor - 57' Incline Bark Conveyor - 60' Deal Processor w/ Recycle Return Conveyor - Log Outfeed - 112' Log Recycle Conveyor - Log Outfeed - Metal Detector - Control Room - Chipper infeed - Carthage 104" 15 Pocket Chipper with 1250 HP Motor (CEM Lite Knife Hardware) - Refurbished Chipper Disc and 1250 HP Motor - Log Peel Bin - (1) 8'x16' Progress Chip Screens with 80' Chip Stacker - #1 Chip Conveyor: 500' - #2 Chip Conveyor: 1000'

Complete shaving mill operation for sale. Machinery can be removed or the new owner can lease the current land. - Morbark Peeler/Debarker - Shaving Mill 1: 40"x12.5', 5-Head, Douglas heads, 50 HP per head, extra plate to run 8' logs instead of 12' - Shaving Mill 2: Jackson 8', 2-Head - 20 MM BTU Dust Burner - 12x50 Triple Pass Drum Dryer - 5x10 Rotex Screen - 37 BTU Dust Burner (Came with system, never used) - Piper Knife Sharpener - All controls and electrical - Approx 10 acres of land (under lease) - All material handling and conveyors - Truck scale - Knuckle Boom: John Deere with CTI Buck Saw

Top And Bottom Scoring: 4hp Trim/Hog: 10hp Top And Bottom Tenons: 10hp Coping Unit With 40 Mm Spindle (6-3/4? Under Nut): 8.5hp Coping Unit With 40 Mm Spindle (6-3/4? Under Nut): 8.5hp Sand/Cope Unit With 40 Mm Spindle (6-3/4? Under Nut): 8.5hp Sand/Cope Unit With 40 Mm Spindle (6-3/4? Under Nut): 8.5hp Variable Speed Feed (16 To 96 Fpm): 6hp Max Working Width: 800 Mm Min Working Width: 170 Mm Min Working Width With One Chain: 55 Mm Max Working Height: 100 Mm Equipped With: “Mobile 10” Touchscreen Screen, Utilizes Encoders For Reference On Where To Position All Units In The X And Y Axis Manual Digital Counters For Tilting Mahros Return Conveyor

Top And Bottom Scoring: 4hp Trim/Hog: 10hp Top And Bottom Tenons: 10hp Coping Unit With 40 Mm Spindle (6-3/4? Under Nut): 8.5hp Coping Unit With 40 Mm Spindle (6-3/4? Under Nut): 8.5hp Sand/Cope Unit With 40 Mm Spindle (6-3/4? Under Nut): 8.5hp Sand/Cope Unit With 40 Mm Spindle (6-3/4? Under Nut): 8.5hp Variable Speed Feed (16 To 96 Fpm): 6hp Max Working Width: 800 Mm Min Working Width: 170 Mm Min Working Width With One Chain: 55 Mm Max Working Height: 100 Mm Equipped With: “Mobile 10” Touchscreen Screen, Utilizes Encoders For Reference On Where To Position All Units In The X And Y Axis Manual Digital Counters For Tilting Mahros Return Conveyor

Vollmer CP650 Recently Taken Out Of Service Well Maintained

Vollmer CP650 Recently Taken Out Of Service Well Maintained

Blower with Century 7-1/2 HP motor 208/239/460 volt 3-phase

This system was used to blow dust to a baghouse in a large facility. There is also a large 100 HP blower and a baghouse at the same location. Pipe is available. Loaded on the truck.

44 ft. long x 96 in. wide variable speed belt conveyor, 2HP 480V electric motor Belt is approximately 90" wide

10' Sorting Table MATERIAL HANDLING BUFFER FOR DECKBOARDS VARIABLE SPEED CONTROLLER FOR TURN SPEED CHAIN/SPROCKET DRIVEN SHAFT 3 HP 3 PHASE MOTOR WITH GEAR REDUCTION 3/8" STEEL TABLE TOP BOLTS TOGETHER

4 banks of 15 fans as pictured

B&C 5' Shaving Mill: 2-Heads, 50 HP each, Infeed log deck, 8" heads with 8-rows of knives B&C 8' Shaving Mill: 3-Heads, 50 HP each, Infeed log deck, 8" heads with 8-rows of knives Outfeed conveyors to drum and stacking room 8'x24' Heil Triple pass drum dryer Jackson Webb Burner

Pallet manufacturer has decided to go a different direction. All machinery will be available as a package or by individual piece! Click for individual listings: - [Baker Single Notcher](https://www.carolinamachinerysales.com/listings/4808984-used-baker-single-head-notcher) - Baker Model C 4-Head Resaw - [Brewco B1600 Grade Resaw](https://www.carolinamachinerysales.com/listings/4806400-used-brewco-b1600-grade-resaw-system ) - [Nyle PHT350 Kiln](https://www.carolinamachinerysales.com/listings/4803222-used-2023-nyle-pht350-dry-kiln) - [Pallet Chief IV with Stacker](https://www.carolinamachinerysales.com/listings/4803270-used-2023-pallet-chief-iv-pallet-nailer) - [Pneumatico Block Nailer](https://www.carolinamachinerysales.com/listings/4803246-used-2023-pneumatico-block-nailer) - [Viking Champion 304A Nailer](https://www.carolinamachinerysales.com/listings/4803252-used-2015-viking-champion-304a-nailer) - [Viking Champion 306 Nailer](https://www.carolinamachinerysales.com/listings/4805708-used-2021-viking-champion-qc306-nailer)

Edger with power takeoff

Flush milling aggregate for Homag , IMA, Morbidelli

Flush milling aggregate for Homag , IMA, Morbidelli

Grapple attachment as pictured

64 ft long 33.5 inch wide 30 in rollers

75 HP 550 Volt 3 phase