CAROLINA BLOWER 45-6 Standard Duty Fan/Motor package assembled complete 30 HP motor. -- Rated at 8,860 CFM at 10" SP. Fan inlet diameter is 19". -- Fabricated with 3/8" thick wheel blades, 1/4" thick housing, primed and painted beige. 30 HP TEFC motor . Unitary base, V-belt drives, shaft and belt safety guards. -- This is an Industrial Material Handling fan with paddle-wheel construction. Also available in Heavy Duty version at extra cost, with thicker scroll-housing to handle airborne smaller solid wood or similar material.

CAS (COMPRESSED AIR SYSTEMS) B73H84-E Reciprocating Air CompressorElite Series 7.5 HP 80 Gallon Horizontal Compressor @ 175 PSI / 24 CFMFeatures & Specifications: -- Access to Compressor Valves without Compressor Head Removal. -- All UL Electrical Controls -- ASME Tested Powder Coated Steel Tank. -- Auto Start / Stop. -- Bearings on Both Ends of the Crank Shaft. -- Centrifugal Unloader. -- Disk and Spring Valves. -- Fully Enclosed Belt Guard. -- Heavy-Duty Air Filter. -- Heavy-Duty (2) Stage Solid Cast Iron Pump. -- Industrial Grade Electric Motor. -- Magnetic Starter Mounted and Wired. -- Needle Bearings, and Inserts on Rods. -- Stainless Steel Flex Air Lines. -- Swedish Steel Valves. -- TEFC Drive Motor (3 Phase Only). -- Torrington Needle Bearings. -- 2-Grove B Width Motor Pulley. -- 2-Piece Tank Top Plate Design.Elite Compressor Features: -- All Basic Features. -- Automatic Tank Drain. -- Belt Guard After Cooler. -- Low Oil Monitor. -- Tank Discharge Ball Valve. -- Vibration Pads.

CHAMPION - HRA25-25, ...Dual Stage Air Compressor. 25 HP Commercial Duty motor; 90.1 CFM at 175 PSI and 250-gal. horizontal tank. -- Features: CHAMPION's "R" Series 2-stage cast iron pump, dome pistons, and disc valves allow for higher performance at lower RPM's; largest roller bearings in the industry. -- The 250-gal. horizontal tank is equipped with: Large pressure gauge, standard tank drain, and a hard painted finish for years of durability. -- Complete with: Large dia. air filters, OSHA approved belt guard. -- Air-cooled aftercooler.

CLEMCO CDF-8 Cartridge Dust CollectorSpecifications: -- Holds (16) cartridge filters. -- Includes New AirMax Premium Media Cartridge Filters – fire retardant. -- Total Filter Media Area: 4,032 ft². -- Air-To-Media Ratio @ 8,000 cfm: 2:1. -- Automatic Pulse Clean System with differential pressure gauge and sequencing control in enclosure. -- Single Hopper Outlet with Sealing Drum Cover Kit. -- Steel Support Structure. -- Includes: 20 HP Top Mount, Direct Drive Blower Rated for 8,000 CFM. -- Electrical Motor Starter & ControlsSold with Six Month Mechanical Warranty

COLUMBUS MCKINNON - E-915, ...Tire Shredder -- Motor: 250 HP. -- Control panel: 120 Volts. -- Feed opening: 28" x 49". -- Knives width: 2-1/16" (double). -- Weight: 33,000 Lbs. -- Loaded onto Truck.

COSMEC SM 320 Multiple Rip Saw12" multiple rip sawSpecifications: -- 320 mm (12.6") Arbor cap., 60 HP arbor motor, -- 120 mm (4-3/4") cutting height, -- 70 mm dia.- 3,700 RPM arbor, -- 300mm min. to 400mm. max. blade dia., --12-5/8" wide feed chain, -- Variable feed speed, 13 - 78 FPM -- 1 HP motorized opening of the pressure beam. Complete with: -- Anti-kickback fingers, auto. chain lubrication, quick adjust infeed fence, motor load meter, emergency stop button and magnetic starter with overload protection.The SM-320 is built with a heavy duty cast iron base.

CP CD1000 CAN DENSIFIER -- 900 to 1,500 Lbs/Hr capacity -- Fully automatic solid-state Controller -- Density: 40 Lbs per cu. ft. allowing 140,000 Lbs in 50' railcars or 40,000 Lbs in 40' Trailers. -- 10 HP 3/60/208/230/460 Volt Hydraulic Power Unit

CP MANUFACTURING - OCC4, ...Fiber Screen Sorting SystemEfficient screening technology for separating 2D & 3D materials.Specifications: -- Capacity: 10 to 12 Tons per hourEquipped with: -- Double OCC -- Fiber screen -- Glass breaker -- Post sort -- Bunkers -- Mezzanines -- Misc. spare parts -- All manualsNOTE: Complete System with low hours!

CP MANUFACTURING - S100-6-LH-US, ...Screens -- (1) System of (2) Screens -- Very lght Use -- Ordered as part of a Single-Stream Sort System that was designed to run 10 Tons/Hr -- 1-Feed Conveyor -- Each: 14,500 Lbs -- Loaded onto your Truck

CP MANUFACTURING - GC100, ...Glass CrusherThe "GC100" crushes up to 7,000 pounds of glass per hour.Specifications: -- A tough, PVC-cleated belt carries the glass up the conveyor, allowing for visual inspection before it enters the crushing chamber. -- It efficiently handles up to a 4-liter container, breaking it into approx. 1-inch pieces of recyclable cullet; that lets you reduce your volume, easily fill your shipping containers - and ship maximum-weight truckloads to reduce your freight costs. -- The "GC100" works and keeps on working. It features cast chromium alloy steel crusher bars that are extremely resilient. It has a completely replaceable crushing drum liner. -- It is constructed of durable, heavy gauge steel. All you need is 115 115-volt single-phase power.FEATURES:• Heavy gauge steel construction• Cast chromium steel crusher bars (4 crusher bars included)• Replaceable crushing drum liner• Removable catch tray• Forklift slots• Shaft-mounted conveyor speed reducerCAPACITY: • Up to 7,000 Lbs/hour • Up to (600) cases/hourSPECIFICATIONS:• 4’-2"; Discharge height• 115 Volt single-phase wiring• 1/3 Cubic yard hopper• Mounted on 8"; casters• 0.5 HP Crusher motor• 0.5 HP Conveyor motor• 15’ Wide PVC cleated conveyor beltDIMENSIONS:• Height: 8’• Length: 3-3/4’• Width: 4’• Conveyor belt width: 15";• Hopper width: 6";• Weight: 1,000 Lbs

CAN-PAK CD-3000 COMPLETE CAN DENSIFIER -- 25 HP motor --DIMENSIONS: • Height—9’2"; • Width—3’10"; • Length—13’5"; • Machine weight—8,000 lbs. • Conveyor weight—1,000 lbs. • Conveyor: 11’5"; high x 20-1/2"; wide x 13’ long --SPECIFICATIONS: • 25 HP power unit • 460 volt 3 phase wiring • Solid state programmable controller • Thermostatically controlled hydraulic oil cooler • 1 cubic yard hopper • 120 gallon hydraulic tank • 20-1/2"; wide infeed conveyor with 3/4 HP motor, direct drive gear reducer, magnetic head pulley and steel reject chute

Cram-A-Lot HX-60, ...Closed Door Baler with Cart Dumper and Infeed ConveyorSpecifications: --The CRAM-A-LOT HX-60 HH & HX Series Balers are ideal for warehouses and designed for ease of installation, operation, and maintenance. --The CRAM-A-LOT® HH & HX Series Balers are built with extra heavy-duty construction and are ideal for warehouses and recyclers who deal with large quantities of corrugated and paper products.This machine is designed for long hours of operation and can operate either manually or automatically with photocell control. Optional custom-engineered feed conveyors and cart dumper systems efficiently control baler feed rates for optimum performance in a complete baling system.Standard features include:ANSI Z245.5 Compliant - All compactors meet or exceed ANSI Z245.5 safety standards.UL/CUL Listed Control PanelsUHMW Ram Shoes - Adjustable to assure straight tracking and readily replaceable, should the need ariseOil Sight Gauge - Oil level at a glanceOil Filter - Replaceable spin-on cartridge to keep your oil cleanHeavy Duty Controls - NEMA 4-rated pushbutton controls with key-lockable start switchAutomatic Single-Cycle Operation --Bale Size: 60" x 30" x 40" -- Bale Weight Up To (OCC) 1400 Lbs --Throughput (OCC) 2.5 bales /Hr -- 7" Cylinder

(3) CRAM-A-LOT - SCR-T2-34, ...34 Yard Self-Contained CompactorsLot of (3) Specifications: -- Cylinder: (2) 4" -- Main motor: 10 HP -- Feed opening: 41″ x 58″ (1,041 mm x 1,473 mm) -- Capacity: 34 Yard -- Ram force: Up to 24 tons

CRESSWOOD Destroyer HF-40-50 Vertical Hopper Low Noise GrinderSpecifications: -- Approximately 66" x 72" Hopper top opening. -- 42" x 66" Hopper bottom opening. -- 38" Hopper height. -- 50 HP motor operates through gearbox to drive 16" dia. x 40" wide rotor with approx. (63) Knives @ 102 - 151 RPM.Features: -- Steel frame construction. -- Hydraulically-operated pusher ram automatically advances & retracts on continuing cycle pushing scrap into low RPM grinding head. Pusher RAM automatically resets in case of material jams. -- 3 HP Hydraulic unit. Complete with: -- Up-rite material feed (Belt Conveyor); Media Blower; Hydraulic System Power Pack; Safety Railing for grinder platform; stairs for grinder access. Specifications subject to verification.

CROWN RC3020-30 Stand-Up ForkliftSpecifications: Load Capacity: 3,000 Lbs -- 3-stage mast -- Max. lift height 190" -- Clearance height: 89" lowered -- Battery drive train: 24VEquipped with: -- Side shift -- cushion tires -- Overhead guard -- Power steering and SCR travel controllerNote: Charger is optional.

CUMMINS - 682-FDR-036JJW, ...1000K DIESEL GENERATORSpecifications: -- Output: 480/277 / 3-Phase -- 1,000 kW -- 1,250 KVA -- 1,504 Amps -- 1,800 RPMNOTE: (299) Hours on meter in factory-built enclosure. - Available for inspection!

CURTIS - 5E2VT8-A3, ...Air Compressor, 5 HPSpecifications: -- Maximum allowable working pressure of 200 at 450 PSI.Equipped with: -- 80-Gallon Tank

DANCKAERT - 44 , ...ResawAir Strain 44"; x 5"; Bandsaw.Features & Specifications: -- McDONOUGH Center Split Feed Works. -- Wheel is supported on both sides - not cantilevered. -- Pressured guides. -- McDONOUGH Infeed Rolls. -- Max. Cut: 14";. -- New Dynamic brake. -- 60 & 100 HP. -- Control Cabinet (has battery backup and resistors to prevent spikes). -- Infeed & outfeed systems are the same. -- 24 ft. Long Camel Back chain (has air bags that are controlled by photo cell to raise & lower and index 1-board at a time). -- Max. length of lumber: 24 ft.From Seller: "The machine has a new VFDD 100 HP and a new WEG Severe Service 60 HP motor. All new hydraulic motors, caramel back chain, and roll cases."NOTE: Needs hydraulic unit.

DANTHERM NFP 3H OPEN 9,000 CFM 20 HP Enclosureless Baghouse Dust CollectorSpecifications: -- Total filter area: 894 sq. ft.Equipped with: -- DANTHERM "S056-450-CW" 20 HP - 1,755 RPM TEFC Blower, with Inlet dia. 450 mm (17.72") & Outlet size 16" x 18". -- (48) Approx. 8" Dia. x 8' L "BEANE" media filter bags. -- Trough-style hopper base, with (6) 20" Dia. Discharge openings & Distance from opening to floor 42". -- Galvanized sheet steel frame. -- ALLEN-BRADLEY Switch box, with Push button controls.DE-INSTALLATION & SHIPPING PREPARATION NOTE: Dust Collector is currently palletized to ship and can be loaded from a dock or ground level. It was fully operational without any issues when removed from service and palletized in May 2024. Prior to palletizing, all bags were completely emptied.

DENRAY 2872 Down Draft TableLarge work surface on this 28" x 72" table (overall). -- Rated at 3,400 CFM, with 2 HP motor and magnetic starter. -- Space-saving self-contained unit w/built-in dust drawer. -- Features; New Tube Filtration System which cleans with a 99% capture rate at 1 micron. -- Quiet operation at only 77 dBA sound level. -- Comfortable 34-1/2" working height. -- 3/4" Thick steel-reinforced MDF board worktable with "non-marring" rubberized surface. -- Easy manual filter cleaning. -- (4) Casters, (2) of which lock in place. -- 115 Volt receptacle with 8' cord. -- Available options; Exhaust Mufflers to reduce sound 10 - 12 dBA, Magnehelic Gauges, HEPA Filter Banks, 3-Sided 20" shields and Odor Control Filters. -- Also available in 230V, 460V and 575V, 3-PH which includes magnetic starter.