CANTEK - MRS-340-M2, ...Rip Saw Multiblade with CAMERON SkewSpecifications -- 4.3" Max. thickness with 14" dia. fixed blade(s); 3.3" with 12" fixed blade(s); 4" with 14" movable blades and 2.95" with 12" movable blades; 13.4" max. working width between outside saws 25.6: max. -- 0verall width; 5-1/2" max. distance to fence from inside fixed blade; 0.59" to 13.38" max. saw travel; 23-1/2" min. stock length; 19.7" possible with optional short stock holddown (reduces thickness capacity). -- With 70 mm dia. x 13-3/4" long saw arbor powered by a 50 HP motor driving the blades at 3,800 RPM; 3 HP feed motor; provides feed speeds from 15 to 135 FPM; -- 0.5 HP Lift motor for holddown roll. -- Infinitely variable saw shifting speeds from 0.78" to 3.15" per second. -- 72" x 31" table size; sits 30" from the floor.Equipped with & Features -- Cast iron main frame with main parts enclosed to ensure protection and perfect stability. -- HD Precision straight line caterpillar-type feed chain with easily replaceable bolt-in cast steel or Urethane chain ads (optional). -- Fully programmable position sets (10) programs of (10) sets each or infinitely variable foot pedal position set; user-friendly -- Touchscreen control (free-standing operators control console) is integrated with 32-bit microprocessor and (2) RS232 ports for incredible positioning speeds and EXACT blade positioning. -- Touchscreen with full and easy programming capabilities and joystick control; saw blade positioning is accomplished by industrial series Servo Motor and control. -- Blade speed is infinitely adjustable from 0.78" to 3.54"/Sec to match all operations; blade positioning can be initiated by electronic joystick control (efficient & quick) or the touchscreen controls. -- (2) Saws independently or (2) saws per shifter (optional as a cluster) or with a single or bank of saws with spacers can be set up on the inside of the saw arbor to Gang Rip, if desired. New short sock-cutting device included. -- Top pressure roll system is electronically positioned from the front control panel for lumber thickness. -- Position readout; top roll holddown system is mated to the Servo positioning short stock shoe to provide optimum straight line ripping and safety; top rolls are spring tensioned and tension is adjustable (pneumatic). -- Specially designed and Patent Pending Precision Glide Lock with nickel chrome steel saw arbor with super technology for easy maintenance and free saw shifting; (2) shifting saw bushings are equipped with specially designed rollers for most accurate and very fast saw positioning. -- (3) Rows of antikickback fingers. -- Variable feeding speeds from 16' to 135' FPM inverter motor and speed control with LED readout. -- Electronic overload sensing system is integrated into the inverter feed system providing automatic speed reduction under heavy amperage load. -- (2) Powered top & bottom outfeed rolls are included; powered roll system facilitates positive flow

CANTEK MODEL MRS-175 6.9"; THICK CUTTING HEAVY-DUTY GANG RIPSAW: -- FEATURES: -- Massive cast iron base provides incredible absorption characteristics for high quality deep cutting operations -- Precision chain and rails (dip chain) system facilitates straight line cutting -- Equipped with a blade mist cooling device providing cooling and cleaning for sawblades during cutting increasing blade life and improved cut quality. -- Motorized saw arbor and thickness adjustment for operator convenience. -- Specially designed auxiliary powered outfeed roller assures maximum smoothness of workpiece outfeed especially when working on extra thick, heavy and moist wood. -- A digitally controller lubrication unit is provided to provide consistent oil protection to the feed chain and guide rails. If the oil level drops below a safe level a warning lamp will light up and the feed chain will stop automatically. -- Equipped with an electronic amperage display which is tied in to an overload protection where if the saw motor exceeds a rated amperage the feed chain slows down automatically. This prevents the potential damaged to the saw arbor and/or blades and also prolongs blade life up to 20%. -- Variable feed speed adjustment by frequency inverter from the front of the machine. -- Please note. with safety cover non-CE -- Measurement: 255x210x170(cm)N.W./G.W.:3,150KGS/3,350KGS -- SPECIFICATIONS -- Max. cutting thickness, 6.9"; -- Max. cutting width, 13-3/4"; -- Fixed inside blade to column, 14.9"; -- Min. working length, 27-1/2"; -- Max. saw blade diameter, 14"; to 18"; -- Sawblade bore, 70 mm or 90mm – double keyed -- Saw arbor diameter, 70 mm without sleeve - 90mm with sleeve -- Saw arbor speed, 2500 RPM -- Saw arbor motor, 75 HP (100 HP optional) -- Saw arbor elevation motor, 1/2 HP -- Feed motor, 3 HP (5HP optional) -- Variable feed speed, 8 – 80 FPM (higher speed optional) -- Powered raise & lower of rolls, 1/2 HP -- Dust hood dia., 8"; -- Table height (pass line), 29.3"; -- Electrics – to UL/CSA standards 230/460 or 575-volt, 3-phase, 60-cycle -- Table area (L x W), 72.4"; x 31.1"; -- Overall dimensions (L x W x H), 95.5"; x 90.5"; x 63";, Net weight 6,600 lbs.

CANTEK MRS-340M-1 GANG RIPSAW WITH (1) SHIFTING BLADE and the following specifications and features: Capacities are: -- 4.3" Max. thickness with 14" dia. fixed blade(s); 3.3" with 12" fixed blade(s); 4" with 14" moveable blades and 2.95" with 12" moveable blades; 13.4" max. working width between outside saws. 25.6" max. overall width; -- 5.5" Max. distance to fence from inside fixed blade; 0.59" to 13.38" max. saw travel; 23-1/2" min. stock length; 19.7" possible with optional short stock holddodwn (reduces thickness capacity. -- With 70 mm dia. x 13-3/4" long saw arbor powered by a 50 HP motor driving the blades at 3,800 RPM; 3 HP feed motor provides feed speeds from 15 to 135 FPM;1/2 HP lift motor for hold-down roll; infinitely variable saw shifting speeds from 0.78" to 3.15" per second; (2) 15 mW laser lights; (2) 12" or 14" dia. x 90 mm bore blades; 72" x 31" table size sits 30" from the floor. Features include: -- Cast iron main frame with main parts enclosed to ensure protection and perfect stability; HD precision straight line caterpillar type feed chain with easily replaceable bolt-in cast steel or Urethane chain ads (optional); -- Fully programmable position sets (10) programs of (10) sets each or infinitely variable foot pedal position set; user friendly Touch Screen control (free standing operators control console) is integrated with 32 bit micro processor and (2) RS232 ports for incredible positioning speeds and EXACT blade positioning. -- Touch Screen with full and easy programming capabilities and joystick control; saw blade positioning is accomplished by industrial series Servo Motor and control; blade speed is infinitely adjustable from 0.78" to 3.54" IPS to match all operations; blade positioning can be initiated by electronic joystick control (efficient & quick) or the touch screen controls. Equipped to shift (1) saw independently or (2) saws per shifter (optional as a cluster) or with a single or bank of saws with spacers can be set up on the inside of the saw arbor to gang rip if desired. New short stock cutting device included -- Top pressure roll system is electronically positioned from the front control panel for lumber thickness; includes position readout; top roll hold down system is mated to the servo positioning short stock shoe to provide optimum straight line ripping and safety; top rolls are spring tensioned and tension is adjustable (pneumatic pressure is optional). -- Specially designed and Patent Pending Precision Glide Lock with nickel chrome steel saw arbor with super technology for easy maintenance and free saw shifting; (2) shifting saw bushings are equipped with specially designed rollers for most accurate and very fast saw positioning. -- (3) Rows of anti-kickback fingers; variable feeding speeds from 16 to 135 FPM inverter motor and speed control with LED readout; electronic overload sensing system is integrated to the inverter feed system providing automatic speed reduction under heavy amperage lo

CAROLINA BLOWER Size 80-6 Material Handling Fan with Motor. --Specification: -- Can handle approx 35,000 CFM @ 11" SP and 840 RPM. -- Comes with: Westinghouse Life-Line (high efficiency) 125 HP, 405T frame, ODP Motor complete with pulleys.. -- Motor is not mounted on base. -- Actual Model is 80-6SD.

CAROLINA BLOWER 45-6 Standard Duty Fan/Motor package assembled complete 30 HP motor. -- Rated at 8,860 CFM at 10" SP. Fan inlet diameter is 19". -- Fabricated with 3/8" thick wheel blades, 1/4" thick housing, primed and painted beige. 30 HP TEFC motor . Unitary base, V-belt drives, shaft and belt safety guards. -- This is an Industrial Material Handling fan with paddle-wheel construction. Also available in Heavy Duty version at extra cost, with thicker scroll-housing to handle airborne smaller solid wood or similar material.

CAS (COMPRESSED AIR SYSTEMS) B73H84-E Reciprocating Air CompressorElite Series 7.5 HP 80 Gallon Horizontal Compressor @ 175 PSI / 24 CFMFeatures & Specifications: -- Access to Compressor Valves without Compressor Head Removal. -- All UL Electrical Controls -- ASME Tested Powder Coated Steel Tank. -- Auto Start / Stop. -- Bearings on Both Ends of the Crank Shaft. -- Centrifugal Unloader. -- Disk and Spring Valves. -- Fully Enclosed Belt Guard. -- Heavy-Duty Air Filter. -- Heavy-Duty (2) Stage Solid Cast Iron Pump. -- Industrial Grade Electric Motor. -- Magnetic Starter Mounted and Wired. -- Needle Bearings, and Inserts on Rods. -- Stainless Steel Flex Air Lines. -- Swedish Steel Valves. -- TEFC Drive Motor (3 Phase Only). -- Torrington Needle Bearings. -- 2-Grove B Width Motor Pulley. -- 2-Piece Tank Top Plate Design.Elite Compressor Features: -- All Basic Features. -- Automatic Tank Drain. -- Belt Guard After Cooler. -- Low Oil Monitor. -- Tank Discharge Ball Valve. -- Vibration Pads.

Tool Grinding Machine for V-Type Gouges. -- Tabletop design saves space. -- Works with most sizes of v-gouges. -- Optional standing base $275.00. -- Diamond stone cutting wheels, ordered seperately, price $420.00 each. -- Please specify required voltage and lathe model when ordering wheels.

CHAMPION - HRA25-25, ...Dual Stage Air Compressor. 25 HP Commercial Duty motor; 90.1 CFM at 175 PSI and 250-gal. horizontal tank. -- Features: CHAMPION's "R" Series 2-stage cast iron pump, dome pistons, and disc valves allow for higher performance at lower RPM's; largest roller bearings in the industry. -- The 250-gal. horizontal tank is equipped with: Large pressure gauge, standard tank drain, and a hard painted finish for years of durability. -- Complete with: Large dia. air filters, OSHA approved belt guard. -- Air-cooled aftercooler.

CLEMCO CDF-8 Cartridge Dust CollectorSpecifications: -- Holds (16) cartridge filters. -- Includes New AirMax Premium Media Cartridge Filters – fire retardant. -- Total Filter Media Area: 4,032 ft². -- Air-To-Media Ratio @ 8,000 cfm: 2:1. -- Automatic Pulse Clean System with differential pressure gauge and sequencing control in enclosure. -- Single Hopper Outlet with Sealing Drum Cover Kit. -- Steel Support Structure. -- Includes: 20 HP Top Mount, Direct Drive Blower Rated for 8,000 CFM. -- Electrical Motor Starter & ControlsSold with Six Month Mechanical Warranty

COLUMBUS MCKINNON - E-915, ...Tire Shredder -- Motor: 250 HP. -- Control panel: 120 Volts. -- Feed opening: 28" x 49". -- Knives width: 2-1/16" (double). -- Weight: 33,000 Lbs. -- Loaded onto Truck.

COSMEC SM 320 Multiple Rip Saw12" multiple rip sawSpecifications: -- 320 mm (12.6") Arbor cap., 60 HP arbor motor, -- 120 mm (4-3/4") cutting height, -- 70 mm dia.- 3,700 RPM arbor, -- 300mm min. to 400mm. max. blade dia., --12-5/8" wide feed chain, -- Variable feed speed, 13 - 78 FPM -- 1 HP motorized opening of the pressure beam. Complete with: -- Anti-kickback fingers, auto. chain lubrication, quick adjust infeed fence, motor load meter, emergency stop button and magnetic starter with overload protection.The SM-320 is built with a heavy duty cast iron base.

CP CD1000 CAN DENSIFIER -- 900 to 1,500 Lbs/Hr capacity -- Fully automatic solid-state Controller -- Density: 40 Lbs per cu. ft. allowing 140,000 Lbs in 50' railcars or 40,000 Lbs in 40' Trailers. -- 10 HP 3/60/208/230/460 Volt Hydraulic Power Unit

CP MANUFACTURING - GC100, ...Glass CrusherThe "GC100" crushes up to 7,000 pounds of glass per hour.Specifications: -- A tough, PVC-cleated belt carries the glass up the conveyor, allowing for visual inspection before it enters the crushing chamber. -- It efficiently handles up to a 4-liter container, breaking it into approx. 1-inch pieces of recyclable cullet; that lets you reduce your volume, easily fill your shipping containers - and ship maximum-weight truckloads to reduce your freight costs. -- The "GC100" works and keeps on working. It features cast chromium alloy steel crusher bars that are extremely resilient. It has a completely replaceable crushing drum liner. -- It is constructed of durable, heavy gauge steel. All you need is 115 115-volt single-phase power.FEATURES:• Heavy gauge steel construction• Cast chromium steel crusher bars (4 crusher bars included)• Replaceable crushing drum liner• Removable catch tray• Forklift slots• Shaft-mounted conveyor speed reducerCAPACITY: • Up to 7,000 Lbs/hour • Up to (600) cases/hourSPECIFICATIONS:• 4’-2"; Discharge height• 115 Volt single-phase wiring• 1/3 Cubic yard hopper• Mounted on 8"; casters• 0.5 HP Crusher motor• 0.5 HP Conveyor motor• 15’ Wide PVC cleated conveyor beltDIMENSIONS:• Height: 8’• Length: 3-3/4’• Width: 4’• Conveyor belt width: 15";• Hopper width: 6";• Weight: 1,000 Lbs

CP MANUFACTURING - S100-6-LH-US, ...Screens -- (1) System of (2) Screens -- Very lght Use -- Ordered as part of a Single-Stream Sort System that was designed to run 10 Tons/Hr -- 1-Feed Conveyor -- Each: 14,500 Lbs -- Loaded onto your Truck

CAN-PAK CD-3000 COMPLETE CAN DENSIFIER -- 25 HP motor --DIMENSIONS: • Height—9’2"; • Width—3’10"; • Length—13’5"; • Machine weight—8,000 lbs. • Conveyor weight—1,000 lbs. • Conveyor: 11’5"; high x 20-1/2"; wide x 13’ long --SPECIFICATIONS: • 25 HP power unit • 460 volt 3 phase wiring • Solid state programmable controller • Thermostatically controlled hydraulic oil cooler • 1 cubic yard hopper • 120 gallon hydraulic tank • 20-1/2"; wide infeed conveyor with 3/4 HP motor, direct drive gear reducer, magnetic head pulley and steel reject chute

CP MANUFACTURING - OCC4, ...Fiber Screen Sorting SystemEfficient screening technology for separating 2D & 3D materials.Specifications: -- Capacity: 10 to 12 Tons per hourEquipped with: -- Double OCC -- Fiber screen -- Glass breaker -- Post sort -- Bunkers -- Mezzanines -- Misc. spare parts -- All manualsNOTE: Complete System with low hours!

(3) CRAM-A-LOT - SCR-T2-34, ...34 Yard Self-Contained CompactorsLot of (3) Specifications: -- Cylinder: (2) 4" -- Main motor: 10 HP -- Feed opening: 41″ x 58″ (1,041 mm x 1,473 mm) -- Capacity: 34 Yard -- Ram force: Up to 24 tons

Cram-A-Lot HX-60, ...Closed Door Baler with Cart Dumper and Infeed ConveyorSpecifications: --The CRAM-A-LOT HX-60 HH & HX Series Balers are ideal for warehouses and designed for ease of installation, operation, and maintenance. --The CRAM-A-LOT® HH & HX Series Balers are built with extra heavy-duty construction and are ideal for warehouses and recyclers who deal with large quantities of corrugated and paper products.This machine is designed for long hours of operation and can operate either manually or automatically with photocell control. Optional custom-engineered feed conveyors and cart dumper systems efficiently control baler feed rates for optimum performance in a complete baling system.Standard features include:ANSI Z245.5 Compliant - All compactors meet or exceed ANSI Z245.5 safety standards.UL/CUL Listed Control PanelsUHMW Ram Shoes - Adjustable to assure straight tracking and readily replaceable, should the need ariseOil Sight Gauge - Oil level at a glanceOil Filter - Replaceable spin-on cartridge to keep your oil cleanHeavy Duty Controls - NEMA 4-rated pushbutton controls with key-lockable start switchAutomatic Single-Cycle Operation --Bale Size: 60" x 30" x 40" -- Bale Weight Up To (OCC) 1400 Lbs --Throughput (OCC) 2.5 bales /Hr -- 7" Cylinder

CRESSWOOD Destroyer HF-40-50 Vertical Hopper Low Noise GrinderSpecifications: -- Approximately 66" x 72" Hopper top opening. -- 42" x 66" Hopper bottom opening. -- 38" Hopper height. -- 50 HP motor operates through gearbox to drive 16" dia. x 40" wide rotor with approx. (63) Knives @ 102 - 151 RPM.Features: -- Steel frame construction. -- Hydraulically-operated pusher ram automatically advances & retracts on continuing cycle pushing scrap into low RPM grinding head. Pusher RAM automatically resets in case of material jams. -- 3 HP Hydraulic unit. Complete with: -- Up-rite material feed (Belt Conveyor); Media Blower; Hydraulic System Power Pack; Safety Railing for grinder platform; stairs for grinder access. Specifications subject to verification.

CROWN RC3020-30 Stand-Up ForkliftSpecifications: Load Capacity: 3,000 Lbs -- 3-stage mast -- Max. lift height 190" -- Clearance height: 89" lowered -- Battery drive train: 24VEquipped with: -- Side shift -- cushion tires -- Overhead guard -- Power steering and SCR travel controllerNote: Charger is optional.