• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
42 Results Found for Boring Machine Viewing 1 - 20 of 42 results
RECENTLY ADDED
STANDARD LISTINGS
AYEN LBM 32-23 CONSTRUCTION BORING MACHINE23-Spindles total in (1) heads with (23) spindles, drills vertically from top. -- Head has a 3 HP motor, 3,450 RPM Gear box motor. -- Complete with: (3) flip-stops, a 9' fence, (3) pneumatic "quick set" holddown clamps, quick fence setting gauge, foot pedal control for drilling cycle/head positioning.I am sadly selling this boring machine. The single head design has been great for custom work, making changes easy. Just upgraded to cnc, so need to find a new home for this machine.
Equipment Location:PACIFIC NORTHWEST, AL
EX-FACTORY INC.
704-841-2001
AYEN SKB-50 ... 32 MM Boring Machine for Construction and Line-Drilling operations;50-Spindles total with (1) 180 ° swivel drill head, (25) spindles on opposite sides, drills vertically from top & horizontally from rear, drills at any angle between 0° - 90° with a positive stop at 45°. -- Equipped with: 50-Spindle swivel head assembly converts in under (1) minute from construction to line boring by flipping the 25-spindle dual outlet drill-head 180° and re-positioning the universal fence system. . -- Features: 3 HP - 3,450 RPM gear box motor, 39" panel width cap. with a 30-1/4" drilling width. -- Rear work-piece support roller for step through construction drilling. Pneumatically controlled rear stop-fence. -- Complete with: (2) 39" Fences with (2) special flip stops for construction drilling set-up, (2) standard flip stops and (2) index pin stops for line drilling set-up. -- (4) Pneumatic quick-set holddown clamps, fence setting gage, foot pedal control for drilling cycle start, operations manual, miscellaneous used drill bits.
Equipment Location:SOUTHEAST, AL
EX-FACTORY INC.
704-841-2001
BIESSE - COMPACT R-6, ...Manual Feed Horizontal & Vertical Boring Machine: -- Specifications:3,200 mm Max. opening cap., min. opening 180 mm. -- Horizontal Units:Right & left horizontal boring units with (20) spindles each, right horizontal unit motorized for setting into position, 205 mm min. opening between horiz. heads. -- Vertical Units:(2) Bottom supports with: (2) Total 9-spindle boring blocks & (2) total 11-spindle boring blocks; manual adjustment on boring blocks (swivels 360° in 90° increments).Each boring block driven by 2 HP motor; all boring blocks 150 mm wide with spindles at 32 mm centers.All supports equipped with: "Micro Dial" indicator & controls for positioning, pneumatic locking, individual adjustment for boring block distance, boring depth. -- Cycle Programmer with:Start/stop button; individual boring unit on/off control switches; emergency on/off switch. -- Complete with:Side & top pressure clamps, manual adjustable backstops.
Equipment Location:MIDWEST
Ed Webb
800-374-5009 ext:377
CAM-WOOD BR-2132 Boring MachineAdjustable 21-spindle boring head on 32 mm centers with position indicator.Features & Specifications: -- Stops in 0° & 90° with pneumatically assisted positioning in vertical & horizontal. -- 0" - 3" Adjustable drilling depth with speed control. -- Head height fine adjustment with mechanical digital readout. -- 2 HP - 3,400 RPM Motor. -- Cast iron 37-1/2" x 31-1/2" table with side fences for mirror-image. -- Line boring fence with repeat stops. -- Foot actuated pneumatic clamps & drill cycle. -- Magnetic starter, overload protection & (1) set of "M10" chucks.
Equipment Location:WEST COAST, AL
EX-FACTORY INC.
704-841-2001
2HP Just serviced and ready to work for you Came from small shop, low hours
Equipment Location:TN
Carolina Machinery Sales, Inc
704-288-1904
USA-Made 13-spindle Line Boring Machine. -- 1 HP BALDOR Motor to drive a helical gear head with spindles on 32 mm centers. -- 21" x 47" Powder coated front table. -- 64" Long back fence with (2) repeat stops and adjustment from 0" - 10" set back. -- (2) Manually operated index pins & (2) spring loaded holddowns. -- Large hand lever to easily move head for up to 2" stroke. -- Collets that accept 10 mm shank bits. -- Bit requirements of 10 mm shank x 5 mm dia. x 57 mm length (not included). -- Option: Pneumatic head movement (please add... $735). -- Option: 220 V, 60 Cy, 3 Ph. (please add... $50). -- Option: Hinge Boring Attachment with a 2-minute change over now available, with boring patterns for BLUM and MEPLA! Please add $705 for each.
Equipment Location:WEST COAST
Ed Webb
800-374-5009 ext:377
USA-Made 13-spindle Line Boring Machine. -- 1 HP BALDOR Motor to drive a helical gear head with spindles on 32 mm centers. -- Pneumatic head movement to reduce operator fatigue. -- 21" x 47" Powder coated front table. -- 64" Long back fence with (2) repeat stops & adjustment from 0" - 10" set back. -- (2) Manually operated index pins & (2) spring loaded holddowns. -- Foot pedal activation for pneumatic movement of the head for up to 2" stroke. -- Collets that accept 10 mm shank bits. -- Bit requirements of 10 mm shank x 5 mm dia. x 57 mm length (not included). -- Option: 220 V, 60 Cy, 1 Ph. (please add... $40). -- Optional Hinge Boring Attachment with a 2 minute change over now available, with boring patterns for BLUM and MEPLA! Please add $330 for each.
Equipment Location:WEST COAST
Ed Webb
800-374-5009 ext:377
USA-Made 23-spindle Horizontal Boring Machine. -- 2 HP BALDOR Motor to drive a helical gear head with spindles on 32 mm centers. -- Pneumatic head movement to reduce operator fatigue. -- 20-1/2" x 36" Cast iron front table. -- 98" Back fence with repeat stops. -- (2) Pneumatically operated index pins & (2) pneumatically operated holddowns. -- Collets that accept 10 mm shank bits. -- Bit requirements of 10 mm shank. -- Foot pedal control. -- Optional: 23-Spindle vertical head (please add...$ 2,005).
Equipment Location:WEST COAST
Ed Webb
800-374-5009 ext:377
USA-Made 46-spindle Double Line Boring Machine. -- (2) 2 HP BALDOR Motors to drive helical gear heads with spindles on 32 mm centers. -- Pneumatic head movement from underneath to eliminate the need to remove the chips from the holes. -- Min. distance of 5-1/2" between lines, max. of 27". -- 132" Long back fence with (4) repeat stops. -- (2) Pneumatically operated index pins & (2) pneumatically operated holddowns. -- Foot pedal control. -- Collets that accept 10 mm shank bits. -- Bit requirements of 10 mm shank x 5 mm dia. x 57 mm length (not included). -- Options: Hydraulic brake for thru drilling (please add...$ 1,176), wired for 440 V, 60 Cy, 3 Ph. (please add... $80), Pneumatic controlled flip stops (please add...$980)
Equipment Location:WEST COAST
Ed Webb
800-374-5009 ext:377
CONQUEST 23 SPINDLE CONSTRUCTION DRILLUSA-Made 23-spindle Single Line Horizontal Boring Machine.Equipped with: -- 2 HP BALDOR Motor drives a helical gear head with spindles on 32 mm centers. -- Pneumatic head movement to reduce operator fatigue. -- Powder coated 2" thick steel table. -- (2) Manually operated index pins & (2) spring loaded holddowns. -- Foot pedal activation for pneumatic movement of the head for up to 2" stroke. -- Collets that accept 10 mm shank bits. -- Drill Bit requirements of 10 mm shank x 5 mm dia. x 57 mm length (not included).OPTIONAL DRILL HEAD: Also available for the model is a dedicated 23 Spindle Vertical Boring Head, with seperate 2-HP Baldor motor (Add $1,462.00) -- 64" Long back fence (Supplied with the optional vertical boring head) with (2) repeat stops & adjustment from 0" - 12" set back.
Equipment Location:WEST COAST
Ed Webb
800-374-5009 ext:377
CONQUEST BO-122 Line Boring Machine (32 mm);USA-Made 23-spindle Single Line Boring Machine. -- 2 HP BALDOR Motor drives a helical gear head with spindles on 32 mm centers. -- Pneumatic head movement to reduce operator fatigue. -- 21" x 47" Powder coated front table. -- 64" Long back fence with (2) repeat stops & adjustment from 0" - 12" set back. -- (2) Manually operated index pins & (2) spring loaded holddowns. -- Foot pedal activation for pneumatic movement of the head for up to 2" stroke. -- Collets that accept 10 mm shank bits. -- Drill Bit requirements of 10 mm shank x 5 mm dia. x 57 mm length (not included).
Equipment Location:WEST COAST
Ed Webb
800-374-5009 ext:377
USA-Made 13-Spindle Line Boring Machine. -- 0.75 HP BALDOR TEFC Motor to drive a helical gear head with spindles on 32 mm centers. -- All metal gears! No plastic gears to strip or break. -- 21" x 30" Powder coated front table. -- 30" Long back fence with (2) repeat stops & adjustment from 0" - full 8" set back. -- (2) Manually operated index pins to line drill long hole rows. -- Large hand lever to easily actuate head for up to 2" stroke. -- Collets that accept 10 mm smooth shank bits. -- Bit requirements (bits not included, but 5 mm x 57 mm brad-point bits can be added for ...$ 11.50 each): brad-point style bits with design for standard applications other than laminated parts or thru-boring where spiral-point style bits are required. -- Options: Stand ...$ 265; Foot pedal operation ...$ 97; 30" Extension fences ...$ 45 each; (2) Flip-stops ...$ 40 each; and Spring holddowns ...$ 114 per set. -- Requires (7) Right, (6) Left drill bits.
Equipment Location:WEST COAST
Ed Webb
800-374-5009 ext:377
DETEL MV23P Single Row Line Boring Machine; (1) 23-Spindle boring head, 32 mm centers, pneumatic cycle & downstroke drilling, 1.5 HP - 2,450 RPM motor.Equipped with: -- (2) Spring hold-downs. -- 60" Back fence with (4) stops, adjusts up to 23-1/2" max. front-to-back. -- (2) Index pins for accurately locating additional holes. -- Air/electrical controls and foot pedal actuator.Includes 10 mm collets, but no drill bits!
Equipment Location:SOUTHEAST
Ed Webb
800-374-5009 ext:377
DETEL M-22 Construction Boring Machine (32 mm);(22) Spindle head, 2 HP motor - 3,000 RPM spindles on 32 mm centers. -- Drills vertically from the bottom and horizontally from the rear. -- Tilts pneumatically with switch control, graduated degree scale from 0° - 90°. -- 40" x 31" Table size, max. workpiece size 35-1/2" x 98-1/2". -- Complete with: (2) Overhead holddown clamps, frontal top stops, left & right side fence, line boring fence.
Equipment Location:SOUTH
Ed Webb
800-374-5009 ext:377
DETEL M-22 Construction Boring Machine (32 mm); -- (22) Spindle head, 2 HP motor - 3,000 RPM spindles on 32 mm centers. -- Drills vertically from the bottom and horizontally from the rear. -- Tilts pneumatically with switch control, graduated degree scale from 0° - 90°. -- 40" x 31" Table size, max. workpiece size 35-1/2" x 98-1/2". Complete with: -- (3) Overhead holddown clamps, frontal top stops, left & right side fence, line boring fence.
Equipment Location:NORTHEAST
Ed Webb
800-374-5009 ext:377
DETEL M-2H DOUBLE ROW LINE BORING MACHINE(2) Rows of (22) spindles on 32 mm centers, (2) 2 HP motors, gear driven spindle at 3,300 RPM, drilling depth up to 3", drills from bottom-up; adjustable opening between heads from 5" - 27" w/mechanical digital readouts. -- Equipped with: 120" Extruded aluminum back fence with (3) large flip stops, (2) air index pins for sequence boring long side panels, and (2) pneumatic holddowns. -- Complete with: Hydraulic brake for through boring, air/electrical controls, emergency stop button and foot pedal actuator for clamping & boring cycle.
Equipment Location:MIDWEST
Ed Webb
800-374-5009 ext:377
DETEL M-3532 CONSTRUCTION LINE BORING MACHINEVertical/horizontal drilling, (35) spindles, drills vertically from the bottom-up, horizontally from the back or any angle between 0° - 90°; tilting action of boring head is pneumatically controlled. -- Distance between the 1st and last spindle 42.8", max. boring depth 3", boring head with (2) 2 HP - 2,800 RPM motors, 52" x 21.4" table size. -- Complete with: (4) Pneumatic holddown cylinders, left- & right-hand side fences with (2) mechanical flip-stops, and foot pedal control for clamping & boring cycle.
Equipment Location:MIDWEST
Ed Webb
800-374-5009 ext:377
GANNOMAT COMBI 110 CONSTRUCTION LINE BORER(23) Spindle head, 2 HP - 2,800 motor, 31-1/2" max. working width, 3" drilling stroke, drills vertically from bottom and horizontally from rear, tilts pneumatically from lower to rear position with positive stop at 45° for angle drilling. -- Holddown clamp assembly tilts 90° for clamping short panels vertically for edge boring, no need to swivel boring head, hydraulic brake for through boring. -- Complete with: (4) Pneumatic holddowns, mirror imaging fences, 4,000 mm line boring fence w/stops and 1,500 mm butt joint fence with (2) flip stops.
Equipment Location:NORTHEAST
Ed Webb
800-374-5009 ext:377
GANNOMAT DB21 CONSTRUCTION/LINE BORINGVertical/horizontal drilling, (21) spindles, drills vertically from the bottom-up, horizontally from the back or any angle between 0° - 90°; tilting action of boring head is pneumatically controlled. -- (21) Spindle head, 2 HP motor - 3,000 RPM spindles on 32 mm centers. Includes BLUM Hinge boring head -- Drills vertically from the bottom and horizontally from the rear. -- Tilts pneumatically with switch control, graduated degree scale from 0° - 90°. -- Complete with: (4) Overhead holddown clamps, frontal top stops,70" (1,800 mm) Left & right side fence,line boring fence , and 45° Miter set-up stop.
Equipment Location:SOUTHWEST
Ed Webb
800-374-5009 ext:377
Quality-made 23-spindle Line Boring Machine Horizontal & Vertical with a 2 HP motor. -- Hardened steel gear head with spindles on 32 mm centers. -- 27-1/2" x 32" Front table with a 40" back fence. -- Manually operated index pin & (2) spring loaded holddowns. -- Foot pedal activated large dual pneumatic cylinders move head 2-1/2" stroke. -- Mechanical digital readout for quick precise setting of the drilling depth. -- Filter/oiler/regulator unit for easy maintenance. -- "Quick Change" Collets to accept 10 mm shank bits. -- Bit requirements of 10 mm shank x 5 mm dia. x 57 mm length (not included). -- Optional 118" back fence with repeat stops.
Equipment Location:WEST COAST
Ed Webb
800-374-5009 ext:377