• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
45 Results Found for Boring Machine Viewing 1 - 20 of 45 results
STANDARD LISTINGS
AYEN LBM 32-23 CONSTRUCTION BORING MACHINE23-Spindles total in (1) heads with (23) spindles, drills vertically from top. -- Head has a 3 HP motor, 3,450 RPM Gear box motor. -- Complete with: (3) flip-stops, a 9' fence, (3) pneumatic "quick set" holddown clamps, quick fence setting gauge, foot pedal control for drilling cycle/head positioning.I am sadly selling this boring machine. The single head design has been great for custom work, making changes easy. Just upgraded to cnc, so need to find a new home for this machine.
Equipment Location:PACIFIC NORTHWEST, AL
EX-FACTORY INC.
704-841-2001
AYEN SKB-50 ... 32 MM Boring Machine for Construction and Line-Drilling operations;50-Spindles total with (1) 180 ° swivel drill head, (25) spindles on opposite sides, drills vertically from top & horizontally from rear, drills at any angle between 0° - 90° with a positive stop at 45°. -- Equipped with: 50-Spindle swivel head assembly converts in under (1) minute from construction to line boring by flipping the 25-spindle dual outlet drill-head 180° and re-positioning the universal fence system. . -- Features: 3 HP - 3,450 RPM gear box motor, 39" panel width cap. with a 30-1/4" drilling width. -- Rear work-piece support roller for step through construction drilling. Pneumatically controlled rear stop-fence. -- Complete with: (2) 39" Fences with (2) special flip stops for construction drilling set-up, (2) standard flip stops and (2) index pin stops for line drilling set-up. -- (4) Pneumatic quick-set holddown clamps, fence setting gage, foot pedal control for drilling cycle start, operations manual, miscellaneous used drill bits.
Equipment Location:SOUTHEAST, AL
EX-FACTORY INC.
704-841-2001
BIESSE - COMPACT R-6, ...Manual Feed Horizontal & Vertical Boring Machine: -- Specifications:3,200 mm Max. opening cap., min. opening 180 mm. -- Horizontal Units:Right & left horizontal boring units with (20) spindles each, right horizontal unit motorized for setting into position, 205 mm min. opening between horiz. heads. -- Vertical Units:(2) Bottom supports with: (2) Total 9-spindle boring blocks & (2) total 11-spindle boring blocks; manual adjustment on boring blocks (swivels 360° in 90° increments).Each boring block driven by 2 HP motor; all boring blocks 150 mm wide with spindles at 32 mm centers.All supports equipped with: "Micro Dial" indicator & controls for positioning, pneumatic locking, individual adjustment for boring block distance, boring depth. -- Cycle Programmer with:Start/stop button; individual boring unit on/off control switches; emergency on/off switch. -- Complete with:Side & top pressure clamps, manual adjustable backstops.
Equipment Location:MIDWEST
Ed Webb
800-374-5009 ext:377
CAM-WOOD BR-2132 Boring MachineAdjustable 21-spindle boring head on 32 mm centers with position indicator.Features & Specifications: -- Stops in 0° & 90° with pneumatically assisted positioning in vertical & horizontal. -- 0" - 3" Adjustable drilling depth with speed control. -- Head height fine adjustment with mechanical digital readout. -- 2 HP - 3,400 RPM Motor. -- Cast iron 37-1/2" x 31-1/2" table with side fences for mirror-image. -- Line boring fence with repeat stops. -- Foot actuated pneumatic clamps & drill cycle. -- Magnetic starter, overload protection & (1) set of "M10" chucks.
Equipment Location:WEST COAST, AL
EX-FACTORY INC.
704-841-2001
2HP Just serviced and ready to work for you Came from small shop, low hours
Equipment Location:TN
Carolina Machinery Sales, Inc
704-288-1904
USA-Made 13-spindle Line Boring Machine. -- 1 HP BALDOR Motor to drive a helical gear head with spindles on 32 mm centers. -- 21" x 47" Powder coated front table. -- 64" Long back fence with (2) repeat stops and adjustment from 0" - 10" set back. -- (2) Manually operated index pins & (2) spring loaded holddowns. -- Large hand lever to easily move head for up to 2" stroke. -- Collets that accept 10 mm shank bits. -- Bit requirements of 10 mm shank x 5 mm dia. x 57 mm length (not included). -- Option: Pneumatic head movement (please add... $735). -- Option: 220 V, 60 Cy, 3 Ph. (please add... $50). -- Option: Hinge Boring Attachment with a 2-minute change over now available, with boring patterns for BLUM and MEPLA! Please add $705 for each.
Equipment Location:WEST COAST
Ed Webb
800-374-5009 ext:377
USA-Made 13-spindle Line Boring Machine. -- 1 HP BALDOR Motor to drive a helical gear head with spindles on 32 mm centers. -- Pneumatic head movement to reduce operator fatigue. -- 21" x 47" Powder coated front table. -- 64" Long back fence with (2) repeat stops & adjustment from 0" - 10" set back. -- (2) Manually operated index pins & (2) spring loaded holddowns. -- Foot pedal activation for pneumatic movement of the head for up to 2" stroke. -- Collets that accept 10 mm shank bits. -- Bit requirements of 10 mm shank x 5 mm dia. x 57 mm length (not included). -- Option: 220 V, 60 Cy, 1 Ph. (please add... $40). -- Optional Hinge Boring Attachment with a 2 minute change over now available, with boring patterns for BLUM and MEPLA! Please add $330 for each.
Equipment Location:WEST COAST
Ed Webb
800-374-5009 ext:377
USA-Made 23-spindle Horizontal Boring Machine. -- 2 HP BALDOR Motor to drive a helical gear head with spindles on 32 mm centers. -- Pneumatic head movement to reduce operator fatigue. -- 20-1/2" x 36" Cast iron front table. -- 98" Back fence with repeat stops. -- (2) Pneumatically operated index pins & (2) pneumatically operated holddowns. -- Collets that accept 10 mm shank bits. -- Bit requirements of 10 mm shank. -- Foot pedal control. -- Optional: 23-Spindle vertical head (please add...$ 2,005).
Equipment Location:WEST COAST
Ed Webb
800-374-5009 ext:377
USA-Made 46-spindle Double Line Boring Machine. -- (2) 2 HP BALDOR Motors to drive helical gear heads with spindles on 32 mm centers. -- Pneumatic head movement from underneath to eliminate the need to remove the chips from the holes. -- Min. distance of 5-1/2" between lines, max. of 27". -- 132" Long back fence with (4) repeat stops. -- (2) Pneumatically operated index pins & (2) pneumatically operated holddowns. -- Foot pedal control. -- Collets that accept 10 mm shank bits. -- Bit requirements of 10 mm shank x 5 mm dia. x 57 mm length (not included). -- Options: Hydraulic brake for thru drilling (please add...$ 1,176), wired for 440 V, 60 Cy, 3 Ph. (please add... $80), Pneumatic controlled flip stops (please add...$980)
Equipment Location:WEST COAST
Ed Webb
800-374-5009 ext:377
CONQUEST 2-46 DOUBLE ROW LINE BORER(2) Rows of (23) spindles, drilling depth up to 2-3/8", drills from bottom-up; (2) 2 HP BALDOR motors, 3,450 RPM spindle speed. - Adjustable opening between heads from 5-1/2" - 27" w/mechanical digital readouts. -- Equipped with: (2) Pneumatic holddowns, 132" back fence with (4) large flip stops, (2) air index pins for sequence boring long side panels; table height 37-1/2". -- Complete with: 10 mm Collets, position indicator, air/electrical controls, and foot pedal for clamping & boring cycle.
Equipment Location:SOUTHEAST
Ed Webb
800-374-5009 ext:377
CONQUEST 23 SPINDLE CONSTRUCTION DRILLUSA-Made 23-spindle Single Line Horizontal Boring Machine.Equipped with: -- 2 HP BALDOR Motor drives a helical gear head with spindles on 32 mm centers. -- Pneumatic head movement to reduce operator fatigue. -- Powder coated 2" thick steel table. -- (2) Manually operated index pins & (2) spring loaded holddowns. -- Foot pedal activation for pneumatic movement of the head for up to 2" stroke. -- Collets that accept 10 mm shank bits. -- Drill Bit requirements of 10 mm shank x 5 mm dia. x 57 mm length (not included).OPTIONAL DRILL HEAD: Also available for the model is a dedicated 23 Spindle Vertical Boring Head, with seperate 2-HP Baldor motor (Add $1,462.00) -- 64" Long back fence (Supplied with the optional vertical boring head) with (2) repeat stops & adjustment from 0" - 12" set back.
Equipment Location:WEST COAST
Ed Webb
800-374-5009 ext:377
CONQUEST BO-122 Line Boring Machine (32 mm);USA-Made 23-spindle Single Line Boring Machine. -- 2 HP BALDOR Motor drives a helical gear head with spindles on 32 mm centers. -- Pneumatic head movement to reduce operator fatigue. -- 21" x 47" Powder coated front table. -- 64" Long back fence with (2) repeat stops & adjustment from 0" - 12" set back. -- (2) Manually operated index pins & (2) spring loaded holddowns. -- Foot pedal activation for pneumatic movement of the head for up to 2" stroke. -- Collets that accept 10 mm shank bits. -- Drill Bit requirements of 10 mm shank x 5 mm dia. x 57 mm length (not included).
Equipment Location:WEST COAST
Ed Webb
800-374-5009 ext:377
USA-Made 13-Spindle Line Boring Machine. -- 0.75 HP BALDOR TEFC Motor to drive a helical gear head with spindles on 32 mm centers. -- All metal gears! No plastic gears to strip or break. -- 21" x 30" Powder coated front table. -- 30" Long back fence with (2) repeat stops & adjustment from 0" - full 8" set back. -- (2) Manually operated index pins to line drill long hole rows. -- Large hand lever to easily actuate head for up to 2" stroke. -- Collets that accept 10 mm smooth shank bits. -- Bit requirements (bits not included, but 5 mm x 57 mm brad-point bits can be added for ...$ 11.50 each): brad-point style bits with design for standard applications other than laminated parts or thru-boring where spiral-point style bits are required. -- Options: Stand ...$ 265; Foot pedal operation ...$ 97; 30" Extension fences ...$ 45 each; (2) Flip-stops ...$ 40 each; and Spring holddowns ...$ 114 per set. -- Requires (7) Right, (6) Left drill bits.
Equipment Location:WEST COAST
Ed Webb
800-374-5009 ext:377
DETEL MV23P Single Row Line Boring Machine; (1) 23-Spindle boring head, 32 mm centers, pneumatic cycle & downstroke drilling, 1.5 HP - 2,450 RPM motor.Equipped with: -- (2) Spring hold-downs. -- 60" Back fence with (4) stops, adjusts up to 23-1/2" max. front-to-back. -- (2) Index pins for accurately locating additional holes. -- Air/electrical controls and foot pedal actuator.Includes 10 mm collets, but no drill bits!
Equipment Location:SOUTHEAST
Ed Webb
800-374-5009 ext:377
DETEL M-22 Construction Boring Machine (32 mm);(22) Spindle head, 2 HP motor - 3,000 RPM spindles on 32 mm centers. -- Drills vertically from the bottom and horizontally from the rear. -- Tilts pneumatically with switch control, graduated degree scale from 0° - 90°. -- 40" x 31" Table size, max. workpiece size 35-1/2" x 98-1/2". -- Complete with: (2) Overhead holddown clamps, frontal top stops, left & right side fence, line boring fence.
Equipment Location:SOUTH
Ed Webb
800-374-5009 ext:377
DETEL M-22 Construction Boring Machine (32 mm); -- (22) Spindle head, 2 HP motor - 3,000 RPM spindles on 32 mm centers. -- Drills vertically from the bottom and horizontally from the rear. -- Tilts pneumatically with switch control, graduated degree scale from 0° - 90°. -- 40" x 31" Table size, max. workpiece size 35-1/2" x 98-1/2". Complete with: -- (3) Overhead holddown clamps, frontal top stops, left & right side fence, line boring fence.
Equipment Location:NORTHEAST
Ed Webb
800-374-5009 ext:377
DETEL "M-2H" LINE BORING MACHINE(2) Line Boring Heads of (25) spindles each on 32 mm centers. Heads engage from beneath the workpiece to keep dust and chips out of the way. Each head is powered by a separate motor. Line bore separation from 5" - 25" with drilling depth of 2.5".Equipped With: -- Mechanical Digital Readouts -- Overhead Pneumatic Hold Downs -- Standard Screw-In 10mm collets -- Hardened steel gears that are pressed into the spindle shafts, 120" back fence with (4) large flip-stops -- Electric controls
Equipment Location:SOUTHEAST
Ed Webb
800-374-5009 ext:377
DETEL M-3532 CONSTRUCTION LINE BORING MACHINEVertical/horizontal drilling, (35) spindles, drills vertically from the bottom-up, horizontally from the back or any angle between 0° - 90°; tilting action of boring head is pneumatically controlled. -- Distance between the 1st and last spindle 42.8", max. boring depth 3", boring head with (2) 2 HP - 2,800 RPM motors, 52" x 21.4" table size. -- Complete with: (4) Pneumatic holddown cylinders, left- & right-hand side fences with (2) mechanical flip-stops, and foot pedal control for clamping & boring cycle.
Equipment Location:MIDWEST
Ed Webb
800-374-5009 ext:377
GANNOMAT COMBI 110 CONSTRUCTION LINE BORER(23) Spindle head, 2 HP - 2,800 motor, 31-1/2" max. working width, 3" drilling stroke, drills vertically from bottom and horizontally from rear, tilts pneumatically from lower to rear position with positive stop at 45° for angle drilling. -- Holddown clamp assembly tilts 90° for clamping short panels vertically for edge boring, no need to swivel boring head, hydraulic brake for through boring. -- Complete with: (4) Pneumatic holddowns, mirror imaging fences, 4,000 mm line boring fence w/stops and 1,500 mm butt joint fence with (2) flip stops.
Equipment Location:NORTHEAST
Ed Webb
800-374-5009 ext:377
GANNOMAT DB21 CONSTRUCTION/LINE BORINGVertical/horizontal drilling, (21) spindles, drills vertically from the bottom-up, horizontally from the back or any angle between 0° - 90°; tilting action of boring head is pneumatically controlled. -- (21) Spindle head, 2 HP motor - 3,000 RPM spindles on 32 mm centers. Includes BLUM Hinge boring head -- Drills vertically from the bottom and horizontally from the rear. -- Tilts pneumatically with switch control, graduated degree scale from 0° - 90°. -- Complete with: (4) Overhead holddown clamps, frontal top stops,70" (1,800 mm) Left & right side fence,line boring fence , and 45° Miter set-up stop.
Equipment Location:SOUTHWEST
Ed Webb
800-374-5009 ext:377