• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
13 Results Found for Band Resaw Viewing 1 - 13 of 13 results

Circular-Saws

Band-Saw-Blades-Wide

Wear-Parts

Tools

Chipper-Parts

Wear-Parts

Chainsaw

Mechanical-Harvesters

Marking-and-Tally
Find More Supplies
PREMIUM LISTINGS
2010 B1600 Brewco Horizontal Resaw, 5" band, 75 HP, merry go round and saw cab, Computer set works, comes with infeed decks, 6" x 24' outfeed spiral rollcase, Still in operation if someone would like to see it running
Equipment Location:Williamstown, NY
Lakewood Products, Inc.
315-964-2449
STANDARD LISTINGS
REDUCED Machine Number: 1182 Machine Type: Resaw Manufacturer: Brewco Model #: 3-Head Location: South East Brewco Big Band Saw 3 head machine 480Volt 3 Phase Mgf 1996 28" wheels Band length 13'2", width 1 1/4" Hydraulic drive feed 3 phase 5 HP motor Head motors 20 HP 6" maximum cant width Cuts 4-6" hardwood 70 fpm Airbaglift with easy spacer height adjustment Comes with spacers and some spare blades Good condition and ready to run
Equipment Location:Blowing Rock, NC
Carolina Used Machinery
828-773-2204
BREWCO MDL BSBH SUPER BAND 4 HEAD BAND RESAW W/20HP ON EACH HEAD; S/N SB4B414 Return available with it.
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
BREWCO MDL BSBH SUPER BAND 2 HEAD BAND RESAW W/20HP ON EACH HEAD S/N SB25414-2
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
BREWCO MDL BBBH 2 HEAD BAND RESAW; (2) 20HP MTRS; S/N BB2J7236 (NO HYDRAULIC POWER UNIT; NO BELT)
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
BREWCO BBBH -- 4-Head Horizontal Resaw;Working dimensions: 6" Wide x 8" high capacity and length 21" to 72"Band: Standard spring blade tensioning system; 13'-2" x 1-1/4" x 0.035 Blade provides thin kerf savings. Quick & easy blade height adjustments.Wheel dia.: 28" Diameter, CNC machined, dynamically balanced, all steel.Belting: Rough top feed belt combines with opposing side feed rolls.Saw motors: 20 HP High Efficiency, 3-Phase electric motor on each head.Variable feed speed 5HP hydraulic drive from 20 to 120 FPM (6 to 36 MPM).
Equipment Location:MIDWEST
EX-FACTORY INC.
704-841-2001
Machine Number: 1503 Machine Type: Resaw-Grade Manufacturer: Brewco Model #: B1600 Location: Mid West Brewco B1600 Grade Resaw Operator Cab Run Around System 5 Way Seperator infeed/outfeed deck Roll Cases Hyd Power Pack All Starters 16"x16"x16' Capacity 3/4" to 9" Thickness 2" Band
Equipment Location:Blowing Rock, NC
Carolina Used Machinery
828-773-2204

Brewco Band Resaw

Call for Price
Call us today for more information on this 2 head Brewco Big Band
Equipment Location:West Plains, MO
Global Machinery Sales LLC
417-256-8131
Machine Number: 629 Machine Type: Resaw Manufacturer: Brewco Model #: Big Band Location: South East Brewco 4 Head Resaw Four Head Big Band
Equipment Location:Blowing Rock, NC
Carolina Used Machinery
828-773-2204
Brewco B-800 4 Head Band Resaw, Wheels have been recrowned and new bearings, Linear bearings & Rails on adjustable air guides have been replaced. Runs a 2" Band. Any air regulator, gauge, or micro-valve that needed was replaced. It has a 4' x 8' in feed belt with the horizontal chains in feed. A 4' x 16' out feed belt, and a 6" x 32' return belt. It has a hydraulic unit with 2 motors and 2 pumps.
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
5-head re-saw line with kick-off return after 1st. saw, includes hyd. system and electric disconnect combination starter panel. Also included is a disconnect at each saw. Also included is the dust pick-up ducting for the 5 head line.
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Brewco Model Resaw w/75HP Motor S/N BBB0598 40" Wheels
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Brewco Single Head Band Resaw EZ-Cut with Return Belt, 20HP
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351