• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
6 Results Found for Hogs and Wood Grinders Viewing 1 - 6 of 6 results

Circular-Saws

Band-Saw-Blades-Wide

Wear-Parts

Tools

Chipper-Parts

Wear-Parts

Chainsaw

Mechanical-Harvesters

Marking-and-Tally
Find More Supplies
STANDARD LISTINGS
CRESSWOOD Horizontal Grinder - 2007 30 HP low rpm, horizontal grinder with power feed. Features load sensing controls and 15' vibrating infeed conveyor. Located in Florida panhandle. Visit www.benjones.com for our complete inventory.
Equipment Location:Columbus, GA
Ben Jones Machinery
706-324-2604
Horizontal feed, low RPM grinder, 5" x 24" feed opening and aggressive feed roller infeed system. -- Equipped with: 10" Dia. x 24" wide grinding rotor head with (42) indexable cutters. -- 40 HP main drive motor; rotor grinds at approx. 400 RPM. -- Aggressive counter weighted feed roll system can process hard woods and soft woods - green or dry, at rates of 900-4,000 Lbs/Hr. -- Dust collection outlet with 10" OD.
Equipment Location:SOUTHEAST
EX-FACTORY INC.
704-841-2001
CRESSWOOD EF-36-60 Horizontal feed, Low RPM Grinder36" Feed opening and pinch type aggressive feed roller infeed system feeds rippings and blocks. -- Equipped with: 36" Wide x 10" dia. grinding head; indexable cutters, rotor grinds at approx. 300 -400 RPM; 60 HP main motor. 10" diameter dust collection port. -- Feed system consists of a 45' x 36" wide vibratory conveyor with 7.5 HP motor. -- Complete with NEMA 12 control box with motor controls. -- Includes: 3/4", 1" and 1-5/8" Interchangeable screens; new replacement teeth, bolts and anvil, electro-magnet for metal separation.
Equipment Location:MID ATLANTIC
EX-FACTORY INC.
704-841-2001
Horizontal feed, low RPM grinder, 7" x 50" Feed opening and pinch type agressive feed roller infeed system feeding up to 17 FPM. -- Equipped with: 50" Wide grinding head with indexable cutters, rotor grinds at approx. 425 RPM; 75 HP main motor. Chip collection outlet with 12" OD auger discharge pipe. -- Includes interchangeable screen (2" & 1-34" hole sizes) -- Feed system consists of a 50" wide x approx. 12' long vibrating conveyor. -- Complete with NEMA 12 control box with motor controls, 100 amp disconnect which accomodates all the components, variable feed drive for feed roll; access door mounted amp meter.
Equipment Location:MID ATLANTIC
EX-FACTORY INC.
704-841-2001
CRESSWOOD EF-72-100 DST Horizontal Feed, Low RPM, Low Noise Grinder: 72" Feed opening and pinch roller infeed system feeding @ up to 17 FPM. -- Equipped with: 72" Wide grinding head with indexable cutters, rotor grinds at approx. 62 - 98 RPM; 100 HP main motor. -- Interchangeable screen (1" installed). -- Complete with: 240" Long x 72" wide vibratory infeed conveyor with 5 HP motor, 144" x 27" vibratory outfeed discharge conveyor with 2 HP motor. -- Electrical controls and panel, including BENSHAW REdiStart Micro II Control; access door mounted amp meter. -- Includes: Electro-Magnetic Conveyorized Metal Separator.
Equipment Location:MID ATLANTIC
EX-FACTORY INC.
704-841-2001
CRESSWOOD HF-30-25SR ST Low RPM Waste GrinderEquipped with: 25 HP Drive motor, 10" Rotor diameter, 30" Rotor length, (54) indexable, replaceable cutter inserts. -- The cutting chamber is 30" x 39", hopper volume is 1.25 cu. yards, and floor area of the unit is 84" x 53". -- Features: Ram assembly includes a machined ram with a 25" ram stroke, premium quality top and bottom guides, and an over sized cylinder rated for 3,000 PSI (over twice its operating pressure). -- Complete with: PLC control and includes load sensor, hour meter, digital cutterhead amp meter, and auto-reverse at start-up. (1,418) Total operating hours only!
Equipment Location:MIDWEST
EX-FACTORY INC.
704-841-2001