• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
26 Results Found for Drum Dryer Viewing 1 - 20 of 26 results
STANDARD LISTINGS

Aeroglide 8X24 Drum Dryer

Call for Price
8'x24' Single Pass Dryer System with the following components:• 10 - 12 MM BTU Biomass Webb Burner.• Stainless Steel Cyclone.• 30 HP Fan.• Airlocks.• AEROGLIDE Single-Pass Drum.• Drum Drive.• Currently configured with a relay fan (negotiable) after the cyclone airlock. -- This system requires some work and electrical controls but otherwise is complete and it has a Biomass Burner. Make your best offer!
Equipment Location:MIDWEST
Bill Christoffersen
800-374-5009 ext:365
Wood Drying System complete with the following major components: -- 12 Ft. x 48 Ft. AEROGLIDE Triple-Pass Rotary Drum Dryer. -- Trunnion Bases with Wheels. -- Drum Drive with Drum surround Sprocket arrangement. -- Dryer Main Fan. -- 40 MM BTU Biomass Burner with fuel Feed System, Burner Fans, Fuel Induction Fan. -- Main Cyclone material separator followed by Twin Multi-clone. -- Cyclone Airlocks. -- Professional rigging and loading is available. -- NOTE: No controls.
Equipment Location:SOUTHEAST
Bill Christoffersen
800-374-5009 ext:365
BARBER GREENE Portable Dryer System with the following major components and features: -- 7 Ft. dia. x 35 Ft. Rotary Drum Dryer. -- Comes with new Flights. -- HAUCK Model 380 Burner operates on Used Oil or Diesel. -- External Trunnion Drive with Shaft-Mount Reducers. -- (2) Drive Motors per trunnion for a total of (4) Drive Motors (480 volt, 3 phase). -- Mounted on 3-Axle Carrier. -- BARBER GREENE 58,000 CFM Baghouse with Pulse Jet Cleaning. -- Also mounted on 3-Axle Carrier. -- Air Ducting.
Equipment Location:WESTERN CDN
Bill Christoffersen
800-374-5009 ext:365
Duske TPD-3500 82.5" (7') Diameter Drum, Drying system to Produce 3.5 Tons Per Hour of Pulp Product out of a Screw Press at 60% Moisture and Dried to 10% Moisture. Call to have Spec sheets Faxed to you.
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
DUSKE, Model TPD-3500, Drying System complete with the following major components and features: -- Natural Gas Burner and Furnace Tube. -- Main Fan. -- Drying Drum. -- Drum Trunnion Bases with Wheels. -- Ductwork. -- Dried material Collector/Separator. -- Dryer Controls and MCC.
Equipment Location:MIDWEST
Bill Christoffersen
800-374-5009 ext:365
HEIL 8' x 24' Rotary Drum Dryer with the following components and features: -- Drum Drive -- (2) Trunnion Bases with (2) Wheels each -- 8' x 24' Single-pass drum with center-fill and shell flighting. This type single-pass is actually often rated for capacity greater than a triple-pass dryer. -- The Drum and Trunions were completely Rebuilt but never put back into service.
Equipment Location:EASTERN CDN
Bill Christoffersen
800-374-5009 ext:365
HEIL 80-24 Rotary Drum Dryer System:Complete with Burner Controls and Cyclone. The System includes the following components and features: -- HEIL 8'x24' Triple-Pass Drum. -- 10-12 MM BTU WEBB Style Biomass Burner. -- Burner & System Controls. -- Main Fan. -- Blowpipe & Cyclone.This type of system is commonly capable of drying up to (4) tons per hour sawdust or up to 60 - 65 yards per hour of molder shavings.
Equipment Location:MIDWEST
Bill Christoffersen
800-374-5009 ext:365

Heil 80-24 Drum Dryer

Call for Price
HEIL DRUM DRYER 8 x 24 Complete with the following main components and features: -- Drum Dryer. -- 8 Ft. x 24 Ft., 3-Pass Rotary Drum Dryer. -- (THIS SINGLE ITEM HAS BEEN SOLD) 12 MM BTU WEBB Burner with Fuel Feed Bin. -- Trunnion Bases with Wheels. -- 10 HP Drum Drive. -- HEIL 50" Diameter Main Fan with Motor. -- This size drum is rated for approximately 5,300 pounds of water evaporation per hour.
Equipment Location:SOUTHWEST
Bill Christoffersen
800-374-5009 ext:365

Heil 80-24 Drum Dryer

Call for Price
Drying System built around an 8' x 24' Triple-Pass Rotary Drum Dryer complete with the following major components and features: -- HEIL Dryer Drum. -- HEIL Trunnion Bases and Drum Drive. -- Material Input Airlock. -- Dryer System Main Fan. -- Biomass Burner with a capacity of approximately 15 MM BTUs. -- Fuel Silo (other silo is not included). -- Cyclone Collector. -- Cyclone Discharge Screw Conveyor. -- Other Conveyors. -- High Pressure Blower Relay System. -- Complete with Electrical Controls and Burner Modulation Controls. -- This system is rated to produce 3 to 4 Tons Per Hour depending upon input/output moisture content levels. The trunnions are all in good condition.NOTE: Priced to sell quickly to clear the site of the equipment.
Equipment Location:MIDWEST
Bill Christoffersen
800-374-5009 ext:365

2009 Kinergy Drum Dryer

Call for Price
This plant shut down and the equipment is no longer needed for the new application. A rigger will be needed for dismantling and loading. Manuf specs to be confirmed: Dryer infeed capacity (wood chips): 14.375 TPH at 60% moisture and a minimum temperature of 25 F; Drying air tempurature is 375 F; Bulk density of the wood is 20 PCF Fluid Bed Dryer: 78" Wide x 67' long providing 435.5 sq ft of drying area; (26) 12" Diameter air inlets on side; (26) 15" Diameter air outlets on top of exhaust hood; Fluid Bed is powerred by (2) 3 HP motors; Fluid Bed is counterbalanced with steel coil springs; Approx wieght 82,000 lbs. Supply Air Fan: New York Blower, 200 HP Motor (2) Sly Inc Dust Collectors: 6930 Sq ft of filter area with single polyester type bags, air to cloth ration of 7:1, 10 guage carbon steel air plenum, schedule 40 dust pulse pipes, 3/16" carbon steel tube sheet, 10 guage carbon steel dust air plenum and hopper, 60-degree air hopper, (3) 36" x 36" BS &B type VSP explosion relief vent of 316 SS construction, 12" screw conveyor with 7 guage flared trough, 12" x 12" Rotary valve, Structural supports, access walk,
Equipment Location:NC
Carolina Machinery Sales, Inc
704-288-1904

MEC Drum Dryer

Call for Price
MEC 13 ft. x 60 ft. Triple Pass Rotary Dryer w/ 500HP Blower, 500HP Return/Recycle Blower, Cyclones, Support Structures, Airlocks and Effox Hot Gas Damper System, Rotary Inkjet Feeder Visit www.infinityassets.com or call 905-669-8893 for more details
Equipment Location:Upper Musquoduboit, NS
Infinity Asset Solutions
905-669-8893

MEC 1040 Drum Dryer

Call for Price
MEC 10 x 40 Triple Pass, Gas Burner with Cyclone Complete System
Equipment Location:Crockett, TX
LPS Equipment & Acquisition Co.
731-986-4351
M-E-C Model 10' x 40' Triple Pass Rotary Drum Dryer complete with the following associated components: -- MEC 10 Ft. diameter x 40 Ft. long, 3-Pass, Rotary Drum. -- Trunnion Bases with Trunnion Wheels, -- Drum Drive with Motor, Sprocket and Drive Chain. -- Professional rigging & loading is available.
Equipment Location:MIDWEST
Bill Christoffersen
800-374-5009 ext:365
MEC 10.5x32 Triple Pass Dryer Webb 20 MM BTU Burner with controls Fan is for the drum dryer This came out of a pellet operation in MN where the owner passed away. This seller purchased these through the bank at the same time and they were purchased 2 years ago. This dryer was purchased for a new site and never installed. It is ready to load!
Equipment Location:NC
Carolina Machinery Sales, Inc
704-288-1904

MEC 12X38 Drum Dryer

Call for Price
M-E-C 12'x38' Triple-pass Rotary Drum Dryer System with the following main components: -- Triple-pass 12'x38' Dryer Drum. -- Drum Drive. -- (2) Trunnion Bases with (2) Trunnion Wheels each. -- Receiving Cyclone. -- Blowpipe as available. -- Cyclone Airlock. -- Main Fan with Motor. -- Rated Capacity: Depending upon moisture content input and output and BTU heat available, up to 10 to 12 tons per hour. -- Price includes removal and loading onto Buyer's trucks. -- NOTE: No Burner included but EX-FACTORY can supply depending upon availability. -- Price includes removal and loading for this one!
Equipment Location:MIDWEST
Bill Christoffersen
800-374-5009 ext:365
MEC 12' X 42' Triple-Pass, Rotary Drum Dryer System complete with the following Features and Components: -- M-E-C 12’x42’ Tripple-Pass Drum. -- M-E-C Trunnion Bases with Trunnion Wheels. -- M-E-C Drum Drive with Motor and Gearbox. -- Main Fan with Fan Motor. -- Cyclone with Cyclone Airlock. -- NOTE: No burner includedNow removed and ready to load.
Equipment Location:MIDWEST
Bill Christoffersen
800-374-5009 ext:365
M-E-C 12' x 42' Triple-pass Rotary Dryer Drum with the following components: -- Triple-pass 12' x 42' Dryer Drum. -- (2) Trunnion Bases with (2) Trunnion Wheels each… (One is equipped with (2) Drum Guide Roller Idlers.) -- NOTE: No Drum Drive. -- The Dryer is to be professionally reconditioned with new flighting installed in the first pass and new insulation and new skin added.
Equipment Location:GREAT PLAINS
Bill Christoffersen
800-374-5009 ext:365

1989 MEC 13X60 Drum Dryer

Call for Price
M-E-C Dryer 13’x60’ Dryer System with Dust Burner. This System is complete with the following components: -- 40 MM BTU McCONNELL Dust Burner with back-up Oil Burner. -- 13’ x 60’ M-E-C Triple-pass Rotary Dryer Drum. -- All Controls. -- Receiving Cyclone & Multi-clones. -- Main Fan with Fan Motor. -- Discharge Stack. -- All related ducting and steel structure. -- Plans, Manuals and Blueprints as available. -- Professional Rigging and Removal is available. -- Note: This is one dryer system despite where two or more may appear in different photos. -- This beautiful System was originally installed in 1989, upgraded by M-E-C in 1995, and then continued in operation from 1995 to 2003. Although the equipment is now about 25 yrs old, it has only been operated for about half that time and was always housed indoors in a supervised environment.
Equipment Location:EASTERN CDN
Bill Christoffersen
800-374-5009 ext:365

MEC Drum Dryer

$67,500
Drum Dryer, MEC Triple Pass Rotary Drum Dryer, $67,500 OBO 540-392-2175
Equipment Location:Dugspur, VA
The Turman Group
540-392-2175
PRODUCTIZATION 10 Ft. x 42 Ft. "Quad-Pass" Rotary Drum Dryer. The components include the drum, drum drive, and trunions. -- The QuadPass patented design concept (Dryers now sold by DUPPS) seeking lower VOC emissions and brighter wood production. The minimized time in the direct heat provides a gentle initial zone while allowing for better spreading and separation of the particles for more uniform drying. Finer particles are swept away quicker from the high heat zone and therefore are dried more uniformly with reduced chance of fire as well. The final pass allows for direct discharge of the material as opposed to the exit of an ordinary three-pass dryer where much of the material must be scooped up from the bottom of the drum by the flighting and dropped into the airstream. -- The PRODUCTIZATION wedge type track mounting system was designed to allow for much easier changing of the drum tracks (drum forged steel tire) than with more common "weld-on- track" type system. Drums and tracks do not expand/contract at exactly the same rate causing a stress between the two components. The wedge system is more commonly found on dryers in heavy industrial applications such as sand drying or on rotary kilns for minerals.
Equipment Location:EASTERN CDN
Bill Christoffersen
800-374-5009 ext:365