• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
99 Results Found for Dust Collection System Viewing 1 - 20 of 99 results
STANDARD LISTINGS
ACT DC-LSL Sanding BoothSanding booth with cartridge type filter 5 HPsuction blower inside cabinet; on/off toggle switch,Approx. dimensions 5' deep X 6' wide X 6" high. All specifications are subject to verification by personal inspection by buyer.
Equipment Location:EASTERN CDN
Bernie Straple
704-841-2001 ext:339
AIR SENTRY BH 300 Cyclone and Baghouse w/Shaker Bag Cleaning.Primary Cyclone: -- 8' Dia. approx, on support stand, collects larger-heavier material from machinery dust sources and centrifugally separated to bottom of cone and discharged through a gearmotor driven Rotary Air Lock (RAL). -- Inspection at bottom of cone. At bottom of RAL is a Tee-Ejector where separated dust is ready to be conveyed by a separate Material Handling Fan (not included). -- Equipped with: Twin AIR SENTRY Modular baghouses with AMERICAN SHEET METAL belt driven Material Handling Fan, 75 HP TEFC motor, both mounted on separate support stand.Secondary Separation: -- AIR SENTRY Baghouse, 14,200 CFM, at 8:1 Air to Cloth Ratio, (240) filter bags, 68" long x 5" dia. for a total approx 1,780 sq. ft. of bag area. -- Two rectangular shells with blow-out/access doors, top mechanical shaker filter cleaning, and two separate gearmotor driven Rotary Air Lock. -- At bottom of two RAL's are two Tee-Ejectors where separated dust is ready to be conveyed by a separate Material Handling Fan (not included). Includes: -- Inspection plate at bottom of cone, Piped Sprinkler heads. -- Support stand, and outside piping pictured. Note: Can be sold as a System or as separate components. Please call to discuss as can be sold with or without dismantling included. Professional rigging & truck loading available, call for quote.
Equipment Location:PACIFIC NORTHWEST
Tony Cornacchione
704-841-2001 ext:432
AIR SENTRY BH 400 Cyclone and Baghouse w/Shaker Bag Cleaning.Primary Cyclone: -- 6' Dia. approx, on support stand, collects larger-heavier material from machinery dust sources and centrifugally separated to bottom of cone and discharged through a gear motor driven Rotary Air Lock (RAL). -- Inspection at bottom of cone. At bottom of RAL is a Tee-Ejector where separated dust is ready to be conveyed by a separate Material Handling Fan (not included). -- Equipped with: (1) AIR SENTRY belt driven Material Handling Fan, 125 HP TEFC motor, both mounted on a floor pad.Secondary Separation: -- AIR SENTRY Baghouse, 15,800 CFM, at 8:1 Air to Cloth Ratio, (280) filter bags, 65" long x 5" dia. for a total approx 1,984 sq. ft. of bag area. -- Two rectangular shells with blow-out/access doors, top mechanical shaker filter cleaning, and two separate gear motor driven Rotary Air Lock. -- At bottom of RAL's are two Tee-Ejectors where separated dust is ready to be conveyed by a separate Material Handling Fan (not included). Includes: -- Electrical controls. -- Inspection plate at bottom of cone, Piped Sprinkler heads. -- Support stand, and outside piping pictured. Note: Can be sold as a System or as separate components. Please call to discuss as can be sold with dismantling or without dismantling included. Professional rigging & truck loading available, call for quote.
Equipment Location:PACIFIC NORTHWEST
Tony Cornacchione
704-841-2001 ext:432
INDUSTRIAL AIR TECHNOLOGY Fan with 200 HP TEFC belt-drive motor. -- Model 542 fan is arranged do deliver 50,000 CFM @ 12" SP, running at 990 RPM and develops 117 BHP. -- Backward inclined, single width blades for use on clean air side, class 4 construction, CCW 360° upblast discharge, 56" inlet dia. Includes shaft guard, belt guard, inlet cone, and adjustable motor base. -- Actual model is 542BISW4CCW3601W.
Equipment Location:WEST COAST
Tony Cornacchione
704-841-2001 ext:432
BELFAB JNBM-OP Dust Collector Patented Modular Technology. -- Designed to collect dust particles ranging from coarse to fine. -- Compact, small footprint interior application design. -- 7.5 HP motor with 3,500 CFM. -- The filtration surface is composed of (1) 165 sq. ft. filtration module with (18) twill cloth filter tubes. Designed to use (2) plastic waste bags or plastic tilt-truck. -- Direct drive centrifugal fan assembly. -- Anti-spark cast aluminum impeller. -- Manual bag shaker. -- Includes: Factor installed magnetic starter. -- Available: Auger with 220V, single-phase 2 HP motor. Reduces waste removal to 5 minutes from normally a 30 minute removal with plastic bags.
Equipment Location:EASTERN CDN
Bernie Straple
704-841-2001 ext:339
BELFAB JNBM-OP Modular Dust Collection SystemPatented Modular Technology. Designed to collect dust particles ranging from coarse to fine. -- Compact, small footprint interior application design. -- 7.5 HP motor with 3,500 CFM. -- The filtration surface is composed of (1) 165 sq. ft. filtration module with (18) twill cloth filter tubes. -- Direct drive centrifugal fan assembly. -- Anti-spark cast aluminum impeller. -- Manual bag shaker.
Equipment Location:WESTERN CDN
Bernie Straple
704-841-2001 ext:339
BM CONCEPTION DUST COLLECTOR MODEL 60 -- Pulse Jet model -- 60 HP motor -- Soft start and control -- 10 feet diameter -- 65 feet height -- 140 bags -- Spare impeller
Equipment Location:EASTERN CDN
Tony Cornacchione
704-841-2001 ext:432
Bag House. This machine is a Torit Model 84 dust collector. Item #00584
Equipment Location:Sturgeon Lake, MN
L & L Sales
218-372-4232
44,500 CFM @ 8 to 1 Air to cloth ratio, 140" dia. round baghouse with (376) cloth filter bags of 12' length (3" x 6" oval bags provide for radial movement of bag during cleaning for longer life), 5,569 sq ft of filter area. -- Equipped with: Filtration media cleaning via 7.5 HP on board pump (new) for compressed air. Return air outlet and 48" x 48" inlet for dustladen air . -- Rotating cleaning air manifold driven by 0.33 HP motor, (1) NEMA 9 solenoid and diaphragm valve control pulse jets of air to clean each row of bags; galvanized steel bag frames with positive bag bolt down to eliminate leakage and ride up of bags once installed; walk-in access door at top of ladder. Complete with: New bags and cages, new PD pump, (4) explosion blowout panels, bolt on arm. -- Separate Twin City Fan 445 blower, not mounted, and suitable for a 150 HP TEFC motor (not included); 12" Rotary Air Lock at the bottom of the 60° hopper. --Does not come with electrcal controls or access ladder and platform. Unit has full skirt base with access door.. -- Price includes loading on your trucks. Freight quotes and professional installation available.
Equipment Location:GREAT PLAINS
Tony Cornacchione
704-841-2001 ext:432
CININNATI FAN RBE-11 Air Handling FanV-Belt driven, 10 HP, Air Handling Fan (Radial Blade Exhauster) max. RPM 4,000. -- Outlet dia. 10-3/4" x 9-3/8", area 66 Sq. Ft. Inlet dia. 11". -- Wheel dia. 19-1/8"
Equipment Location:MIDWEST
Bernie Straple
704-841-2001 ext:339
CONCEPT AIR LPJ15 Pulse Jet Dust Collector.20,400 CFM @ 6.4 to 1 air-to-cloth ratio Pulse Jet Dust Collector. Integral round style dust filter with primary separation and secondary filtration. -- Equipped with: (156) filter bags providing about 3,183 sq. ft. of cloth area. Filter bags located in smaller dia. section (approx. 11' dia.) on top of larger cyclone. Uses compressed air for automatic electrically operated pulse jet bag cleaning. -- Designed with 15' larger dia. cyclone section to allow heavier particulate to drop from the air stream before encountering the filter media, extending bag life. -- Dust laden air enters at mid-height into the larger cyclone shell portion where its velocity drops and a thermal deflector directs warm air down to the lower V-section allowing the heavier dust particles to drop before being drawn up through the filter tubes. -- Ground mounted 125 HP TEFC motor powering a 29" inlet dia. CONCEPT AIR HDCS-29 blower with backward inclined blades.Features & Includes: -- Discharge through a 12" Rotary Air Lock followed by screw auger. -- Explosion doors. Unit designed to meet NFPA68 standard. -- Clean air side walk-in plenum for easy access to bag maintenance. -- Structural steel supports, maintenance ladder with safety cage and railing around top. -- Electric control panel. -- Currently installed with no return air as unit was used in a rubber plant where the vapor needed to be discharged outside.
Equipment Location:EASTERN CDN
Tony Cornacchione
704-841-2001 ext:432
DELTA 50-861 Dust Collector Self-contained indoor unit; 5 HP fan motor, rated at 4,500 CFM. -- Equipped with: (12) Upper cloth filter bags and (2) lower cloth collection bag with 19.4 cu. ft. cap. each; large dia. inlet with flange mounted manifold with (3) 5" dia inlets. -- Complete with: Mobile base with (6) swivel casters and starter.
Equipment Location:SOUTHWEST
Bernie Straple
704-841-2001 ext:339
DENRAY 2872 Down Draft Sanding Table28" x 72" Table (overall), rated at 3,400 CFM, 1.5 HP motor w/magnetic starter. -- Open sides for "air conditioning" type filters. -- Features: No duct work, no loss of conditioned air; inlet air enters the table through (2) incoming blast gates, (1) 4" & (1) 5"; 68 dBA sound level. -- Working height 34", working table made out of 3/4" thick steel reinforced MDF board with "non-marring" rubberized surface; manual filter cleaning. -- Includes: Unit mounted on (4) casters, (2) of which lock in place; 115 Volt receptacle with 8' cord.
Equipment Location:SOUTH
Bernie Straple
704-841-2001 ext:339
DENRAY 9600 B Down Draft Sanding TableExtra large 48" x 96" table; Comfortable 36" working height. -- Powerful system with 4,800 CFM rating. -- 5 HP Motor with magnetic starter. -- Space-saving self-contained unit w/built-in dust drawers and high efficiency cartridge filters. -- No duct work, no loss of conditioned air. -- 1-1/8" Thick hardwood frame worktable with 3/4" thick MDF board and rubberized surface. -- Fully enclosed unit. -- "Self-Cleaning" System with push button start to force compressed air from a storage tank into the filters and force dust into the dust drawer. -- Floor level exhaust with low decibel exhaust muffler. -- Quiet operation with only 82 dB. -- Includes: (4) caster wheel kit, Magnehelic gauge and 15' power cord.
Equipment Location:MIDWEST
Bernie Straple
704-841-2001 ext:339
28" x 48" Table, self-contained unit - no duct work and no loss of conditioned air. -- Working height 34-1/2". -- Working table made of 1-1/8" thick hardwood frame with 3/4" thick steel reinforced MDF board with rubberized surface. -- Use a compressor attachment to clean filter. -- Complete with switch and 8' cord.
Equipment Location:MIDWEST
Bernie Straple
704-841-2001 ext:339
DENRAY 2872B Down Draft Sanding Table28" x 72" Table (overall), rated at 3,400 CFM, 1.5 HP motor w/magnetic starter. -- Open sides for "air conditioning" type filters. -- Features: No duct work, no loss of conditioned air; inlet air enters the table through (2) incoming blast gates, (1) 4" & (1) 5"; 68 dBA sound level. -- Working height 34", working table made out of 3/4" thick steel reinforced MDF board with "non-marring" rubberized surface; manual filter cleaning. -- Includes: Unit mounted on (4) casters, (2) of which lock in place; 115 Volt receptacle with 8' cord.
Equipment Location:PACIFIC NORTHWEST
Bernie Straple
704-841-2001 ext:339
DISA C-4000 Cyclone w/ After-filter and RAL. -- 4,000 CFM, Cyclone type with Expansion chamber for moulder surge. Made from 16-gauge steel, for interior or exterior use. -- 20 HP TEFC direct drive fan motor with starter for 460 V, mounted on top of cyclone; 14" dia. inlet with quick fit connections. -- Equipped with: 10" Koger rotary air lock, base stand to clear air lock, return air plenum with filter bags and quick fit connections. -- This unit is "as taken from service". -- Ready to be loaded on truck.
Equipment Location:MID ATLANTIC
Bernie Straple
704-841-2001 ext:339
DIXIE AIR SPB Pulse Jet Dust Collector. -- 16,100 CFM @ 9.5:1 air-to-cloth ratio, round baghouse with (108) cloth filter bags of 12' length resulting in a total approx. 1,695 sq ft of filter media area. -- Ground mounted main Blower with 50 HP motor connected in a negative pressure configuration. -- Automatic reverse pulse cleaning system with differential pressure gauge, positive displacement air pump for pulse clean. -- Galvanized steel bag frames with positive bag bolt down to eliminate leakage and ride-up of bags once installed. -- Walk-In Clean Air Service Plenum. Tangential dirty air inlet. -- Electrical control panel featuring front mounted FIRETEK Spark Detection System. -- Single cone hopper outlet with rotary airlock discharge. -- Horizontal shared transfer auger (about 54' long). -- Steel support structure with access ladder and service platform.Professional disassembly, loading on truck and/or transportation available upon request.NOTE: Unit being sold under this record is pictured on the right side on the first two photos. For the larger diameter unit on the left side (PNEUMAFIL) see record "DO-011265".
Equipment Location:NORTHEAST
Tony Cornacchione
704-841-2001 ext:432
DUST TECHNOLOGY DT-200 Modular Dust Collector w/ RALFree-standing self-contained internal air system, 20 HP Motor, rated for 7,000 CFM, 4-bag unit. -- (4) Upper cloth filter bags with 99 sq. ft. filter area; 16" inlet dia. and a dust baffling system to distribute waste. -- Includes; 20 HP motor, magnetic starter, (4) Upper cloth filter bags and rotary air-lock for waste disposal. -- Includes all sheet metal necessary to replace collection bags under (2) of the filtration bags. RAL has 0.5 HP motor drive, 14" dia. rotor with (3) fins, 8" square inlet and 8" round outlet
Equipment Location:NORTHEAST
Bernie Straple
704-841-2001 ext:339
DUSTEK C1000 Dust Collector. -- Free standing collector with 10 HP, 3,600 RPM motor, (3) bag unit, 12" inlet diameter & 4,000 CFM. -- 45 square feet filter area, 100 cubic feet collection capacity. -- System uses inexpensive collection bags for easy disposal or reuse. -- Complete with: Magnetic starter.
Equipment Location:MIDWEST
Bernie Straple
704-841-2001 ext:339