• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
95 Results Found for Dust Collection System Viewing 1 - 20 of 95 results
STANDARD LISTINGS
BELFAB JNBM-OP Modular Dust Collection SystemPatented Modular Technology. Designed to collect dust particles ranging from coarse to fine. -- Compact, small footprint interior application design. -- 7.5 HP motor with 3,500 CFM. -- The filtration surface is composed of (1) 165 sq. ft. filtration module with (18) twill cloth filter tubes. -- Direct drive centrifugal fan assembly. -- Anti-spark cast aluminum impeller. -- Manual bag shaker.
Equipment Location:WESTERN CDN
Bernie Straple
800-374-5009 ext:339
BELFAB JNBM-OP Dust CollectorPatented Modular Technology. -- Designed to collect dust particles ranging from coarse to fine. -- Compact, small footprint interior application design. -- 7.5 HP motor with 3,500 CFM. -- The filtration surface is composed of (1) 165 sq. ft. filtration module with (18) twill cloth filter tubes. -- Direct drive centrifugal fan assembly. -- Anti-spark cast aluminum impeller. -- Manual bag shaker. -- Includes: Manual starter, factory installed with 5' cable for three phase.
Equipment Location:MTN/CENTRAL CDN
Bernie Straple
800-374-5009 ext:339
BELFAB NBM 6-20/20 Modular Dust Collector;(6) Modules and Dust Transfer Hoppers with (2) 7.5 HP Material Transfer blower assemblies. -- Technology: Self-contained and fully enclosed with unique, patented, Heavy Duty construction designed for interior or exterior use. Trouble free shaker bag cleaning.Equipped/Specs: -- Each "NBM" filter module is fitted with (1) service door & (1) explosion door per NFPA safety regulations, and integrated compact hopper; rated @ 11,000 CFM with 10" static pressure w.g.; -- (108) Total filter tubes in (6) filter modules, each module with (18) 7" x 60" Poly Twill cloth filter tubes; 990 sq. ft. total cloth area, 11:1 air-to-cloth ratio. Supplied with: -- Bag shaking mechanism automatically activated upon shutdown. -- (2) Direct drive centrifugal fan assemblies with 20 HP TEFC Motors (run one or both blowers as needed) side mounted, both with anti-spark cast aluminum impellers. -- (2) 16" Dia. inlets and 17" outlet. Includes & Complete with: -- Chip and Dust Transfer System with (2) 7.5 HP Material Handling blowers, continuously discharges chips and dust for re-cycling or disposal. -- Electrical control panel with all pre-wired motor starters, adjustable timer, pilot lights, & shaker mechanism.
Equipment Location:ATLANTIC CDN
Tony Cornacchione
800-374-5009 ext:432
BM CONCEPTION DUST COLLECTOR MODEL 60 -- Pulse Jet model -- 60 HP motor -- Soft start and control -- 10 feet diameter -- 65 feet height -- 147 bags -- Spare impeller
Equipment Location:EASTERN CDN
Tony Cornacchione
800-374-5009 ext:432
BRUNING & FEDERLE JJ13-1160 Blower. Heavy-duty, belt driven, 15 HP Blower / housing mounted to a heavy-duty I-beam base. -- Inlet dia. 13", outlet dia. 13". -- Unit includes; Heavy-duty, chain driven metal separator.
Equipment Location:SOUTHEAST
Bernie Straple
800-374-5009 ext:339
44,500 CFM @ 8 to 1 Air to cloth ratio, 140" dia. round baghouse with (376) cloth filter bags of 12' length (3" x 6" oval bags provide for radial movement of bag during cleaning for longer life), 5,569 sq ft of filter area. -- Equipped with: Filtration media cleaning via 7.5 HP on board pump (new) for compressed air. Return air outlet and 48" x 48" inlet for dustladen air . -- Rotating cleaning air manifold driven by 0.33 HP motor, (1) NEMA 9 solenoid and diaphragm valve control pulse jets of air to clean each row of bags; galvanized steel bag frames with positive bag bolt down to eliminate leakage and ride up of bags once installed; walk-in access door at top of ladder. Complete with: New bags and cages, new PD pump, (4) explosion blowout panels, bolt on arm. -- Separate Twin City Fan 445 blower, not mounted, and suitable for a 150 HP TEFC motor (not included); 12" Rotary Air Lock at the bottom of the 60┬░ hopper. --Does not come with electrcal controls or access ladder and platform. Unit has full skirt base with access door.. -- Price includes loading on your trucks. Freight quotes and professional installation available.
Equipment Location:GREAT PLAINS
Tony Cornacchione
800-374-5009 ext:432
CININNATI FAN RBE-11 Air Handling FanV-Belt driven, 10 HP, Air Handling Fan (Radial Blade Exhauster) max. RPM 4,000. -- Outlet dia. 10-3/4" x 9-3/8", Inlet area 66 Sq. Ft. Inlet dia. 11". -- Wheel dia. 19-1/8"
Equipment Location:MIDWEST
Bernie Straple
800-374-5009 ext:339
CORAL, AF/2C, ... Stationary (2) Bag Dust CollectorSpecifications:- Blower Motor, (5.5 HP) - 3,400 RPM.- CFM, 3,930 rated capacity, 58 sq/ft filter area.- Outlet, (1) 250 mm (9-7/8"), vertical-up between filter bags.- Filter, (2) cloth bags. - Collection, (2) cloth bags- Starter, manual on/off drum switch.
Equipment Location:WEST COAST
Bernie Straple
800-374-5009 ext:339
CORAL AF/4C Dust Collector High efficiency dust collector, 7.5 HP - 3,400 RPM fan motor. -- Rated at 4,580 CFM at 6" S/P and 3,540 at 8" S/P. Main inlet 12-3/8" dia. -- Includes: 7.5 HP blower motor, (4) upper filter bags & (4) lower filter collection bags. Magnetic starter and overload protection. (5) port manifold with 12" main inlet and (3) 6" port and (2) 4" ports. -- Capacity of 36 cubic feet and dust collection @ 5 microns.
Equipment Location:GREAT PLAINS
Bernie Straple
800-374-5009 ext:339
CORAL CMS/1C DUST COLLECTORHigh efficiency Collector, 4 HP - 3,400 RPM fan motor, (1) upper filter bags No lower plastic bags included. -- Rated at 1,500 CFM, 9 cubic feet collection capacity, inlet sizes (1) each 5". -- Equipped with: Floor sweep.
Equipment Location:NORTHEAST
Bernie Straple
800-374-5009 ext:339
DANTHERM S-040-315-CW Bag house Dust Collector FeaturesPolyester Bag Material (3 micron 99% capture rate)Tube Filter Design (32 bags)Front accessSpecificationsCapacity 5000 CFM15hp 230/460V 3600rpm 3ph.Fan Weight 463 lbFilter Assembly weight 1123 lbs.Includes outside filtration system.
Equipment Location:WEST COAST
Bernie Straple
800-374-5009 ext:339
DANTHERM S-750 Bag House Dust Collector. -- Equipped with; 7.5 HP - 1,750 RPM TEFC Motor, (24) Beane material filter bags, (3) metal waste collection barrels and flange for quick fit pipe. Magnetic starter. -- Features: 243 Sq/ft of filter media, easy installation typically (1) hour; quiet operation, (3) waste discharge points, and a 280 mm (11") dia. inlet. -- This unit is very versatile and capable of a wide range of operation; 2,500 CFM @ 10"Wg; 3,500 CFM @ 8" Wg; 4,500 @ 6" Wg.
Equipment Location:SOUTH
Bernie Straple
800-374-5009 ext:339
┬│DANTHERM S-750 Bag House Dust Collector. -- Equipped with; 7.5 HP - 1,750 RPM TEFC Motor, (24) Beane material filter bags, (3) metal waste collection barrels and flange for quick fit pipe. Magnetic starter. -- Features: 243 Sq/ft of filter media, easy installation typically (1) hour; quiet operation, (3) waste discharge points, and a 280 mm (11") dia. inlet. -- This unit is very versatile and capable of a wide range of operation; 2,500 CFM @ 10"Wg; 3,500 CFM @ 8" Wg; 4,500 @ 6" Wg.
Equipment Location:NORTHWEST
Bernie Straple
800-374-5009 ext:339
DENRAY 3672 Down Draft Sanding TableConvenient 36" x 72" Table. -- Comfortable 36" working height. -- Rated at 3,500 CFM. -- 3 HP, 3-Phase motor with magnetic starter. -- Self-contained, New Tube Filtration System which cleans with a 99% capture rate at 1 micron -- Space-saving design with no duct work, no loss of conditioned air. Sound level at 78 dBA. -- 1-1/8" Thick hardwood frame worktable with 3/4" thick MDF board and rubberized surface. -- Includes; (4) swivel casters, (2) which lock in place.
Equipment Location:WESTERN CDN
Bernie Straple
800-374-5009 ext:339
DENRAY 2872 Down Draft Sanding Table28" x 72" Table (overall), rated at 3,400 CFM, 1.5 HP motor w/magnetic starter. -- Open sides for "air conditioning" type filters. -- Features: No duct work, no loss of conditioned air; inlet air enters the table through (2) incoming blast gates, (1) 4" & (1) 5"; 68 dBA sound level. -- Working height 34", working table made out of 3/4" thick steel reinforced MDF board with "non-marring" rubberized surface; manual filter cleaning. -- Includes: Unit mounted on (4) casters, (2) of which lock in place; 115 Volt receptacle with 8' cord.
Equipment Location:SOUTH
Bernie Straple
800-374-5009 ext:339
DENRAY 2872B Down Draft Sanding Table28" x 72" Table (overall), rated at 3,400 CFM, 1.5 HP motor w/magnetic starter. -- Open sides for "air conditioning" type filters. -- Features: No duct work, no loss of conditioned air; inlet air enters the table through (2) incoming blast gates, (1) 4" & (1) 5"; 68 dBA sound level. -- Working height 34", working table made out of 3/4" thick steel reinforced MDF board with "non-marring" rubberized surface; manual filter cleaning. -- Includes: Unit mounted on (4) casters, (2) of which lock in place; 115 Volt receptacle with 8' cord.
Equipment Location:PACIFIC NORTHWEST
Bernie Straple
800-374-5009 ext:339
DISA C-4000 Cyclone w/ After-filter and RAL. -- 4,000 CFM, Cyclone type with Expansion chamber for moulder surge. Made from 16-gauge steel, for interior or exterior use. -- 20 HP TEFC direct drive fan motor with starter for 460 V, mounted on top of cyclone; 14" dia. inlet with quick fit connections. -- Equipped with: 10" Koger rotary air lock, base stand to clear air lock, return air plenum with filter bags and quick fit connections. -- This unit is "as taken from service". -- Ready to be loaded on truck.
Equipment Location:MID ATLANTIC
Bernie Straple
800-374-5009 ext:339
DISA NFP-4M Interior Dust CollectorOpen-type bag house for interior use Specifications: -- 25 HP material handling fan rated at 8,200 CFM @ 10" water gauge -- Inlet dia. 18" reduced to 14" on material handling fan branching to (2) bag houses -- Each bag house has (64) 8" dia. x 55" tall cloth filter bags with 648 sq. ft. for each bag house -- Waste collection into (8) plastic bags on each bag house -- Overall dimensions: 22' long x 10'4" wide x 10'2" tall Electrical controls NOT included
Equipment Location:SOUTHEAST
Bernie Straple
800-374-5009 ext:339
DIXIE AIR SPB Pulse Jet Dust Collector. -- 16,100 CFM @ 9.5:1 air-to-cloth ratio, round baghouse with (108) cloth filter bags of 12' length resulting in a total approx. 1,695 sq ft of filter media area. -- Ground mounted main Blower with 50 HP motor connected in a negative pressure configuration. -- Automatic reverse pulse cleaning system with differential pressure gauge, positive displacement air pump for pulse clean. -- Galvanized steel bag frames with positive bag bolt down to eliminate leakage and ride-up of bags once installed. -- Walk-In Clean Air Service Plenum. Tangential dirty air inlet. -- Electrical control panel featuring FIRETEK Spark Detection System (subject to prior sale with adjacent unit). -- Single cone hopper outlet with rotary airlock discharge. -- Horizontal shared transfer auger (about 54' long). -- Steel support structure with access ladder and service platform.Professional disassembly, loading on truck and/or transportation available upon request.NOTE: Unit being sold under this record is pictured on the right side on the first two photos. For the larger diameter unit on the left side (PNEUMAFIL) see record "DO-011265".
Equipment Location:NORTHEAST
Tony Cornacchione
800-374-5009 ext:432
Donaldson Cyclone 25" Dia x 6' with 10" Inlet.
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351