• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
124 Results Found for Dust Collection System Viewing 1 - 20 of 124 results
RECENTLY ADDED
STANDARD LISTINGS
ACT DC-LSL Sanding BoothSanding booth with cartridge type filter 5 HPsuction blower inside cabinet; on/off toggle switch,Approx. dimensions 5' deep X 6' wide X 6" high. All specifications are subject to verification by personal inspection by buyer.
Equipment Location:EASTERN CDN
Bernie Straple
704-841-2001 ext:339
AIR SENTRY BH 300 Cyclone and Baghouse w/Shaker Bag Cleaning.Primary Cyclone: -- 8' Dia. approx, on support stand, collects larger-heavier material from machinery dust sources and centrifugally separated to bottom of cone and discharged through a gearmotor driven Rotary Air Lock (RAL). -- Inspection at bottom of cone. At bottom of RAL is a Tee-Ejector where separated dust is ready to be conveyed by a separate Material Handling Fan (not included). -- Equipped with: Twin AIR SENTRY Modular baghouses with AMERICAN SHEET METAL belt driven Material Handling Fan, 75 HP TEFC motor, both mounted on separate support stand.Secondary Separation: -- AIR SENTRY Baghouse, 14,200 CFM, at 8:1 Air to Cloth Ratio, (240) filter bags, 68" long x 5" dia. for a total approx 1,780 sq. ft. of bag area. -- Two rectangular shells with blow-out/access doors, top mechanical shaker filter cleaning, and two separate gearmotor driven Rotary Air Lock. -- At bottom of two RAL's are two Tee-Ejectors where separated dust is ready to be conveyed by a separate Material Handling Fan (not included). Includes: -- Inspection plate at bottom of cone, Piped Sprinkler heads. -- Support stand, and outside piping pictured. Note: Can be sold as a System or as separate components. Please call to discuss as can be sold with or without dismantling included. Professional rigging & truck loading available, call for quote.
Equipment Location:PACIFIC NORTHWEST
Tony Cornacchione
704-841-2001 ext:432
AIR SENTRY BH 400 Cyclone and Baghouse w/Shaker Bag Cleaning.Primary Cyclone: -- 6' Dia. approx, on support stand, collects larger-heavier material from machinery dust sources and centrifugally separated to bottom of cone and discharged through a gear motor driven Rotary Air Lock (RAL). -- Inspection at bottom of cone. At bottom of RAL is a Tee-Ejector where separated dust is ready to be conveyed by a separate Material Handling Fan (not included). -- Equipped with: (1) AIR SENTRY belt driven Material Handling Fan, 125 HP TEFC motor, both mounted on a floor pad.Secondary Separation: -- AIR SENTRY Baghouse, 15,800 CFM, at 8:1 Air to Cloth Ratio, (280) filter bags, 65" long x 5" dia. for a total approx 1,984 sq. ft. of bag area. -- Two rectangular shells with blow-out/access doors, top mechanical shaker filter cleaning, and two separate gear motor driven Rotary Air Lock. -- At bottom of RAL's are two Tee-Ejectors where separated dust is ready to be conveyed by a separate Material Handling Fan (not included). Includes: -- Electrical controls. -- Inspection plate at bottom of cone, Piped Sprinkler heads. -- Support stand, and outside piping pictured. Note: Can be sold as a System or as separate components. Please call to discuss as can be sold with dismantling or without dismantling included. Professional rigging & truck loading available, call for quote.
Equipment Location:PACIFIC NORTHWEST
Tony Cornacchione
704-841-2001 ext:432
INDUSTRIAL AIR TECHNOLOGY Fan with 200 HP TEFC belt-drive motor. -- Model 542 fan is arranged do deliver 50,000 CFM @ 12" SP, running at 990 RPM and develops 117 BHP. -- Backward inclined, single width blades for use on clean air side, class 4 construction, CCW 360° upblast discharge, 56" inlet dia. Includes shaft guard, belt guard, inlet cone, and adjustable motor base. -- Actual model is 542BISW4CCW3601W.
Equipment Location:WEST COAST
Tony Cornacchione
704-841-2001 ext:432
BELFAB JNBM-OP Modular Dust Collection SystemPatented Modular Technology. Designed to collect dust particles ranging from coarse to fine. -- Compact, small footprint interior application design. -- 7.5 HP motor with 3,500 CFM. -- The filtration surface is composed of (1) 165 sq. ft. filtration module with (18) twill cloth filter tubes. -- Direct drive centrifugal fan assembly. -- Anti-spark cast aluminum impeller. -- Manual bag shaker.
Equipment Location:WESTERN CDN
Bernie Straple
704-841-2001 ext:339
BELFAB JNBM-OP Modular Dust Collection System --Patented Modular Technology. Designed to collect dust particles ranging from coarse to fine. -- Compact, small footprint interior application design. -- 5 HP motor with 3,500 CFM. -- The filtration surface is composed of (1) 165 sq. ft. filtration module with (18) twill cloth filter tubes. -- Direct drive centrifugal fan assembly. -- Anti-spark cast aluminum impeller. -- Manual bag shaker.
Equipment Location:EASTERN CDN
Bernie Straple
704-841-2001 ext:339
BM CONCEPTION DUST COLLECTOR MODEL 60 -- Pulse Jet model -- 60 HP motor -- Soft start and control -- 10 feet diameter -- 65 feet height -- 140 bags -- Spare impeller
Equipment Location:EASTERN CDN
Tony Cornacchione
704-841-2001 ext:432
BRUNING & FEDERLE JJ13-1160 Blower. Heavy-duty, belt driven, 15 HP Blower / housing mounted to a heavy-duty I-beam base. -- Inlet dia. 13", outlet dia. 13". -- Unit includes; Heavy-duty, chain driven metal separator.
Equipment Location:SOUTHEAST, AL
Bernie Straple
704-841-2001 ext:339
44,500 CFM @ 8 to 1 Air to cloth ratio, 140" dia. round baghouse with (376) cloth filter bags of 12' length (3" x 6" oval bags provide for radial movement of bag during cleaning for longer life), 5,569 sq ft of filter area. -- Equipped with: Filtration media cleaning via 7.5 HP on board pump (new) for compressed air. Return air outlet and 48" x 48" inlet for dustladen air . -- Rotating cleaning air manifold driven by 0.33 HP motor, (1) NEMA 9 solenoid and diaphragm valve control pulse jets of air to clean each row of bags; galvanized steel bag frames with positive bag bolt down to eliminate leakage and ride up of bags once installed; walk-in access door at top of ladder. Complete with: New bags and cages, new PD pump, (4) explosion blowout panels, bolt on arm. -- Separate Twin City Fan 445 blower, not mounted, and suitable for a 150 HP TEFC motor (not included); 12" Rotary Air Lock at the bottom of the 60° hopper. --Does not come with electrcal controls or access ladder and platform. Unit has full skirt base with access door.. -- Price includes loading on your trucks. Freight quotes and professional installation available.
Equipment Location:GREAT PLAINS
Tony Cornacchione
704-841-2001 ext:432
CININNATI FAN RBE-11 Air Handling FanV-Belt driven, 10 HP, Air Handling Fan (Radial Blade Exhauster) max. RPM 4,000. -- Outlet dia. 10-3/4" x 9-3/8", area 66 Sq. Ft. Inlet dia. 11". -- Wheel dia. 19-1/8"
Equipment Location:MIDWEST
Bernie Straple
704-841-2001 ext:339
CONCEPT AIR LPJ15 Pulse Jet Dust Collector.20,400 CFM @ 6.4 to 1 air-to-cloth ratio Pulse Jet Dust Collector. Integral round style dust filter with primary separation and secondary filtration. -- Equipped with: (156) filter bags providing about 3,183 sq. ft. of cloth area. Filter bags located in smaller dia. section (approx. 11' dia.) on top of larger cyclone. Uses compressed air for automatic electrically operated pulse jet bag cleaning. -- Designed with 15' larger dia. cyclone section to allow heavier particulate to drop from the air stream before encountering the filter media, extending bag life. -- Dust laden air enters at mid-height into the larger cyclone shell portion where its velocity drops and a thermal deflector directs warm air down to the lower V-section allowing the heavier dust particles to drop before being drawn up through the filter tubes. -- Ground mounted 125 HP TEFC motor powering a 29" inlet dia. CONCEPT AIR HDCS-29 blower with backward inclined blades.Features & Includes: -- Discharge through a 12" Rotary Air Lock followed by screw auger. -- Explosion doors. Unit designed to meet NFPA68 standard. -- Clean air side walk-in plenum for easy access to bag maintenance. -- Structural steel supports, maintenance ladder with safety cage and railing around top. -- Electric control panel. -- Currently installed with no return air as unit was used in a rubber plant where the vapor needed to be discharged outside.
Equipment Location:EASTERN CDN
Tony Cornacchione
704-841-2001 ext:432
CORAL AF/4C Dust Collector High efficiency dust collector, 7.5 HP - 3,400 RPM fan motor. -- Rated at 4,580 CFM at 6" S/P and 3,540 at 8" S/P. Main inlet 12-3/8" dia. -- Includes: 7.5 HP blower motor, (4) upper filter bags & (4) lower filter collection bags. Magnetic starter and overload protection. -- Capacity of 36 cubic feet and dust collection @ 5 microns. -- NOT AVAILABLE FOR SALE UNTIL FEB. 2017
Equipment Location:NORTHEAST
Bernie Straple
704-841-2001 ext:339
CUSTOM Build Dust Collector ... For Finishing Department.Designed for lacquer sanding operation; 16" inlet dia., approx. 12,000 CFM, includes free standing ground mounted "BUFFALO", Type "MW", size #60 exhaust fan with 25-HP motor. -- Collector bottom is cone shaped with (4) pipe fittings, @ equipped with an auto blast gate, dumping in to 55 gallon steel drums. Includes magnetic starter for main motor and some piping if wanted.NOTE: This Unit is now packed and containerized. Under certain conditions the Machine can be removed from containers for a physical inspection. Containers may also be purchased if wanted!
Equipment Location:WEST COAST
Tony Cornacchione
704-841-2001 ext:432
DANTHERM S-1000 BAG FILTER Dust Collector. Specifications & Features:The DANTHERM S-Series Baghouse Dust Collector is quick to install and easy to operate. It's the ideal solution for the small shop or single work-cell operation. With a 10 HP motor and a CFM range from 4,000 CFM @ 8" WG to 5,000 CFM @ 7" WG. -- Includes; 10 HP - 1,750 RPM TEFC Motor, (24) Beane material filter bags, (3) plastic waste collection bags, (3) clamps for easy removal of waste bage. -- Features; 360 sq/ft of filter medis, easy installation, typically (1) hour; quiet operation, (3) waste discharge points. -- Inlet opening 15". -- Support legs slide-up/down along filter framework for easy (low profile) shipping.Included Options:- Collection Bin, 230 Gal. capacity, portable on casters.- Magnetic Starter, on/off.- Assortment of ducting - (4) sticks of 16" pipe, 16" 90 degree elbow and 8" branch fitting
Equipment Location:SOUTH, AL
Bernie Straple
704-841-2001 ext:339
DANTHERM S-750 Bag House Dust Collector. -- Equipped with; 7.5 HP - 1,750 RPM TEFC Motor, (24) Beane material filter bags, (3) metal waste collection barrels and flange for quick fit pipe. Magnetic starter. -- Features: 243 Sq/ft of filter media, easy installation typically (1) hour; quiet operation, (3) waste discharge points, and a 280 mm (11") dia. inlet. -- This unit is very versatile and capable of a wide range of operation; 2,500 CFM @ 10"Wg; 3,500 CFM @ 8" Wg; 4,500 @ 6" Wg.
Equipment Location:SOUTH, AL
Bernie Straple
704-841-2001 ext:339
DELTA 50-861 Dust Collector Self-contained indoor unit; 5 HP fan motor, rated at 4,500 CFM. -- Equipped with: (12) Upper cloth filter bags and (2) lower cloth collection bag with 19.4 cu. ft. cap. each; large dia. inlet with flange mounted manifold with (3) 5" dia inlets. -- Complete with: Mobile base with (6) swivel casters and starter.
Equipment Location:SOUTHWEST
Bernie Straple
704-841-2001 ext:339
DENRAY 2872 Down Draft Sanding Table28" x 72" Table (overall), rated at 3,400 CFM, 1.5 HP motor w/magnetic starter. -- Open sides for "air conditioning" type filters. -- Features: No duct work, no loss of conditioned air; inlet air enters the table through (2) incoming blast gates, (1) 4" & (1) 5"; 68 dBA sound level. -- Working height 34", working table made out of 3/4" thick steel reinforced MDF board with "non-marring" rubberized surface; manual filter cleaning. -- Includes: Unit mounted on (4) casters, (2) of which lock in place; 115 Volt receptacle with 8' cord.
Equipment Location:SOUTH
Bernie Straple
704-841-2001 ext:339
DENRAY 2872B Down Draft Sanding Table28" x 72" Table (overall), rated at 3,400 CFM, 1.5 HP motor w/magnetic starter. -- Open sides for "air conditioning" type filters. -- Features: No duct work, no loss of conditioned air; inlet air enters the table through (2) incoming blast gates, (1) 4" & (1) 5"; 68 dBA sound level. -- Working height 34", working table made out of 3/4" thick steel reinforced MDF board with "non-marring" rubberized surface; manual filter cleaning. -- Includes: Unit mounted on (4) casters, (2) of which lock in place; 115 Volt receptacle with 8' cord.
Equipment Location:PACIFIC NORTHWEST
Bernie Straple
704-841-2001 ext:339
28" x 48" Table, self-contained unit - no duct work and no loss of conditioned air. -- Working height 34-1/2". -- Working table made of 1-1/8" thick hardwood frame with 3/4" thick steel reinforced MDF board with rubberized surface. -- Use a compressor attachment to clean filter. -- Complete with switch and 8' cord.
Equipment Location:MIDWEST
Bernie Straple
704-841-2001 ext:339
DENRAY 9600 B Down Draft Sanding TableExtra large 48" x 96" table; Comfortable 36" working height. -- Powerful system with 4,800 CFM rating. -- 5 HP Motor with magnetic starter. -- Space-saving self-contained unit w/built-in dust drawers and high efficiency cartridge filters. -- No duct work, no loss of conditioned air. -- 1-1/8" Thick hardwood frame worktable with 3/4" thick MDF board and rubberized surface. -- Fully enclosed unit. -- "Self-Cleaning" System with push button start to force compressed air from a storage tank into the filters and force dust into the dust drawer. -- Floor level exhaust with low decibel exhaust muffler. -- Quiet operation with only 82 dB. -- Includes: (4) caster wheel kit, Magnehelic gauge and 15' power cord.
Equipment Location:MIDWEST
Bernie Straple
704-841-2001 ext:339