• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
104 Results Found for Dust Collection System Viewing 1 - 20 of 104 results
STANDARD LISTINGS
ACT DC-LSL Sanding BoothSanding booth with cartridge type filter 5 HPsuction blower inside cabinet; on/off toggle switch,Approx. dimensions 5' deep X 6' wide X 6" high. All specifications are subject to verification by personal inspection by buyer.
Equipment Location:EASTERN CDN
Bernie Straple
800-374-5009 ext:339
INDUSTRIAL AIR TECHNOLOGY Fan with 200 HP TEFC belt-drive motor. -- Model 542 fan is arranged do deliver 50,000 CFM @ 12" SP, running at 990 RPM and develops 117 BHP. -- Backward inclined, single width blades for use on clean air side, class 4 construction, CCW 360° upblast discharge, 56" inlet dia. Includes shaft guard, belt guard, inlet cone, and adjustable motor base. -- Actual model is 542BISW4CCW3601W.
Equipment Location:WEST COAST
Tony Cornacchione
800-374-5009 ext:432
BELFAB JNBM-OP Modular Dust Collection SystemPatented Modular Technology. Designed to collect dust particles ranging from coarse to fine. -- Compact, small footprint interior application design. -- 7.5 HP motor with 3,500 CFM. -- The filtration surface is composed of (1) 165 sq. ft. filtration module with (18) twill cloth filter tubes. -- Direct drive centrifugal fan assembly. -- Anti-spark cast aluminum impeller. -- Manual bag shaker.
Equipment Location:WESTERN CDN
Bernie Straple
800-374-5009 ext:339
BELFAB NBM 6-20/20 Modular Shaker Technology (6) Modules and Dust Transfer Hoppers with (2) 7.5 HP Material Transfer blower assemblies.Technology: Self-contained and fully enclosed with unique, patented, Heavy Duty construction designed for interior or exterior use. Trouble free shaker bag cleaning. -- Equipped/Specs: Each "NBM" filter module is fitted with (1) service door & (1) explosion door per NFPA safety regulations, and integrated compact hopper; rated @ 11,000 CFM with 10" static pressure w.g.; (108) total filter tubes in (6) filter modules, each module with (18) 7" x 60" Poly Twill cloth filter tubes; 990 sq. ft. total cloth area, 11:1 air-to-cloth ratio; -- Supplied with: Bag shaking mechanism automatically activated upon shutdown; (2) Direct drive centrifugal fan assemblies with 20 HP TEFC Motors (run one or both blowers as needed) side mounted, both with anti-spark cast aluminum impellers; (2) 16" dia. inlets and 17" outlet. -- Includes: Chip and Dust Transfer System with (2) 7.5 HP Material Handling blowers, continuously discharges chips and dust for re-cycling or disposal. -- Complete with: Electrical control panel with all pre-wired motor starters, adjustable timer, pilot lights, & shaker mechanism.
Equipment Location:ATLANTIC CDN
Tony Cornacchione
800-374-5009 ext:432
BELFAB JNBM-OP Dust CollectorPatented Modular Technology. -- Designed to collect dust particles ranging from coarse to fine. -- Compact, small footprint interior application design. -- 7.5 HP motor with 3,500 CFM. -- The filtration surface is composed of (1) 165 sq. ft. filtration module with (18) twill cloth filter tubes. -- Direct drive centrifugal fan assembly. -- Anti-spark cast aluminum impeller. -- Manual bag shaker. -- Includes: Manual starter, factory installed with 5' cable for three phase.
Equipment Location:MTN/CENTRAL CDN
Bernie Straple
800-374-5009 ext:339
BM CONCEPTION DUST COLLECTOR MODEL 60 -- Pulse Jet model -- 60 HP motor -- Soft start and control -- 10 feet diameter -- 65 feet height -- 140 bags -- Spare impeller
Equipment Location:EASTERN CDN
Tony Cornacchione
800-374-5009 ext:432
BRUNING & FEDERLE JJ13-1160 Blower. Heavy-duty, belt driven, 15 HP Blower / housing mounted to a heavy-duty I-beam base. -- Inlet dia. 13", outlet dia. 13". -- Unit includes; Heavy-duty, chain driven metal separator.
Equipment Location:SOUTHEAST
Bernie Straple
800-374-5009 ext:339
•15 HP motor •13" diameter inlet •13" diameter outlet •Metal seperator included This blower was used to take chips away from a grinder
Equipment Location:NC
Carolina Machinery Sales, Inc
704-288-1904
Could not find ID tag. We believe it is a Carolina Blower/Bruning & Federle 6' Diameter 145 HP Motor This blower was purchased used with a dust collector and is too big for their application.
Equipment Location:NC
Carolina Machinery Sales, Inc
704-288-1904
44,500 CFM @ 8 to 1 Air to cloth ratio, 140" dia. round baghouse with (376) cloth filter bags of 12' length (3" x 6" oval bags provide for radial movement of bag during cleaning for longer life), 5,569 sq ft of filter area. -- Equipped with: Filtration media cleaning via 7.5 HP on board pump (new) for compressed air. Return air outlet and 48" x 48" inlet for dustladen air . -- Rotating cleaning air manifold driven by 0.33 HP motor, (1) NEMA 9 solenoid and diaphragm valve control pulse jets of air to clean each row of bags; galvanized steel bag frames with positive bag bolt down to eliminate leakage and ride up of bags once installed; walk-in access door at top of ladder. Complete with: New bags and cages, new PD pump, (4) explosion blowout panels, bolt on arm. -- Separate Twin City Fan 445 blower, not mounted, and suitable for a 150 HP TEFC motor (not included); 12" Rotary Air Lock at the bottom of the 60° hopper. --Does not come with electrcal controls or access ladder and platform. Unit has full skirt base with access door.. -- Price includes loading on your trucks. Freight quotes and professional installation available.
Equipment Location:GREAT PLAINS
Tony Cornacchione
800-374-5009 ext:432
CININNATI FAN RBE-11 Air Handling FanV-Belt driven, 10 HP, Air Handling Fan (Radial Blade Exhauster) max. RPM 4,000. -- Outlet dia. 10-3/4" x 9-3/8", Inlet area 66 Sq. Ft. Inlet dia. 11". -- Wheel dia. 19-1/8"
Equipment Location:MIDWEST
Bernie Straple
800-374-5009 ext:339
CORAL, AF/2C, ... Stationary (2) Bag Dust CollectorSpecifications:- Blower Motor, 4 Kw (5.0 HP) - 3,400 RPM.- CFM, 3,930 rated capacity, 58 sq/ft filter area.- Outlet, (1) 250 mm (9-7/8"), vertical-up between filter bags.- Filter, (2) cloth bags. - Collection, (2) 55 gallon steel drums- Starter, manual on/off drum switch.
Equipment Location:WEST COAST
Bernie Straple
800-374-5009 ext:339
STAINLESS STEEL CYCLONES
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
DANTHERM S-750 Bag House Dust Collector. -- Equipped with; 7.5 HP - 1,750 RPM TEFC Motor, (24) Beane material filter bags, (3) metal waste collection barrels and flange for quick fit pipe. Magnetic starter. -- Features: 243 Sq/ft of filter media, easy installation typically (1) hour; quiet operation, (3) waste discharge points, and a 280 mm (11") dia. inlet. -- This unit is very versatile and capable of a wide range of operation; 2,500 CFM @ 10"Wg; 3,500 CFM @ 8" Wg; 4,500 @ 6" Wg.
Equipment Location:SOUTH
Bernie Straple
800-374-5009 ext:339
DENRAY 2872 Down Draft Sanding Table28" x 72" Table (overall), rated at 3,400 CFM, 1.5 HP motor w/magnetic starter. -- Open sides for "air conditioning" type filters. -- Features: No duct work, no loss of conditioned air; inlet air enters the table through (2) incoming blast gates, (1) 4" & (1) 5"; 68 dBA sound level. -- Working height 34", working table made out of 3/4" thick steel reinforced MDF board with "non-marring" rubberized surface; manual filter cleaning. -- Includes: Unit mounted on (4) casters, (2) of which lock in place; 115 Volt receptacle with 8' cord.
Equipment Location:SOUTH
Bernie Straple
800-374-5009 ext:339
DENRAY 9600 B Down Draft Sanding TableExtra large 48" x 96" table; Comfortable 36" working height. -- Powerful system with 4,800 CFM rating. -- 5 HP Motor with magnetic starter. -- Space-saving self-contained unit w/built-in dust drawers and high efficiency cartridge filters. -- No duct work, no loss of conditioned air. -- 1-1/8" Thick hardwood frame worktable with 3/4" thick MDF board and rubberized surface. -- Fully enclosed unit. -- "Self-Cleaning" System with push button start to force compressed air from a storage tank into the filters and force dust into the dust drawer. -- Floor level exhaust with low decibel exhaust muffler. -- Quiet operation with only 82 dB. -- Includes: (4) caster wheel kit, Magnehelic gauge and 15' power cord.
Equipment Location:MIDWEST
Bernie Straple
800-374-5009 ext:339
DENRAY 2872B Down Draft Sanding Table28" x 72" Table (overall), rated at 3,400 CFM, 1.5 HP motor w/magnetic starter. -- Open sides for "air conditioning" type filters. -- Features: No duct work, no loss of conditioned air; inlet air enters the table through (2) incoming blast gates, (1) 4" & (1) 5"; 68 dBA sound level. -- Working height 34", working table made out of 3/4" thick steel reinforced MDF board with "non-marring" rubberized surface; manual filter cleaning. -- Includes: Unit mounted on (4) casters, (2) of which lock in place; 115 Volt receptacle with 8' cord.
Equipment Location:PACIFIC NORTHWEST
Bernie Straple
800-374-5009 ext:339
DENRAY 9600 Downdraft Table48" x 96" Table rated at 4,900 CFM, 2 HP motor w/magnetic starter. -- Utilizes a two-stage filter system a top filter is cleaned daily via vaccuum and secondary lower bank of steel framed filters that can be cleaned via vacuum when necessary; fully self-contained unit: No duct work, no loss of conditioned air.Technical Specifications: -- Working height of 36". -- Working table made of 1-1/8" thick hardwood frame with 3/4" thick steel reinforced MDF board. -- Exhaust air comes out at floor level and can be directed away from operator. -- sound level 82 dB.
Equipment Location:WEST COAST
Bernie Straple
800-374-5009 ext:339
DISA C-4000 Cyclone w/ After-filter and RAL. -- 4,000 CFM, Cyclone type with Expansion chamber for moulder surge. Made from 16-gauge steel, for interior or exterior use. -- 20 HP TEFC direct drive fan motor with starter for 460 V, mounted on top of cyclone; 14" dia. inlet with quick fit connections. -- Equipped with: 10" Koger rotary air lock, base stand to clear air lock, return air plenum with filter bags and quick fit connections. -- This unit is "as taken from service". -- Ready to be loaded on truck.
Equipment Location:MID ATLANTIC
Bernie Straple
800-374-5009 ext:339
DIXIE AIR SPB Pulse Jet Dust Collector. -- 16,100 CFM @ 9.5:1 air-to-cloth ratio, round baghouse with (108) cloth filter bags of 12' length resulting in a total approx. 1,695 sq ft of filter media area. -- Ground mounted main Blower with 50 HP motor connected in a negative pressure configuration. -- Automatic reverse pulse cleaning system with differential pressure gauge, positive displacement air pump for pulse clean. -- Galvanized steel bag frames with positive bag bolt down to eliminate leakage and ride-up of bags once installed. -- Walk-In Clean Air Service Plenum. Tangential dirty air inlet. -- Electrical control panel featuring front mounted FIRETEK Spark Detection System. -- Single cone hopper outlet with rotary airlock discharge. -- Horizontal shared transfer auger (about 54' long). -- Steel support structure with access ladder and service platform.Professional disassembly, loading on truck and/or transportation available upon request.NOTE: Unit being sold under this record is pictured on the right side on the first two photos. For the larger diameter unit on the left side (PNEUMAFIL) see record "DO-011265".
Equipment Location:NORTHEAST
Tony Cornacchione
800-374-5009 ext:432