• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
37 Results Found for Board Edgers Viewing 1 - 20 of 37 results
RECENTLY ADDED
PREMIUM LISTINGS
2013 Wood-Mizer EG200 twin blade edger. Yanmar 21 HP diesel, 250 hours. 30' of extra bed rollers (16' in and 20' out), 2 board return rollers, no trailer package. $12,500.00 ($5,000 off of new price). Great deal! Wood-Mizer 24' extension. $3,750.00 Barely used. All manuals for each item. Selling due to back injury.
Equipment Location:Helena, MT
Woody's Lumber & Sawmill, LLC
406-443-6538
STANDARD LISTINGS

2003 Brewer Board Edgers

Call for Price
Edge (1) Stationary blade and (2) movable blades Hydraulic pump Conveyor and Deck This Brewer Board Edger is all ready to load!!!
Equipment Location:NC
Carolina Machinery Sales, Inc
704-288-1904

Comact 2 Saw Board Edgers

Call for Price
Comac 2 Saw Edger with in & out Feed
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
COOK 2 SAW EDGER-BOTH SAWS SLIDE W/9' INFEED ROLLCASE, 20HP MTR & 7 1/2 MTR S/N 3682981
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Machine Number: 893 Machine Type: Edger Manufacturer: Corley Model #: Two Saw Edger Location: South East Corley Two Saw Edger (2) 20 HP Saw Motors 10HP Hyd Power Pack 32" x 4" Capacity Infeed Table Tailing Device
Equipment Location:Southeast
Keith Comeau
704-929-9122
CORLEY MDL 648 COMBO EDGER W/INFEED ROLLCASE S/N EH648-01816932
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351

Corley Board Edgers

Call for Price
4" x 30" Corley board edger. Two blades powered by individual motors move in and out from center. 14" blades with two 20 HP motors. Laser mounts (lasers not included) and board tailer. Located in southern US.
Equipment Location:Portland, OR
Sawmill Pallet Machine
971-271-8070
Cornell Edger 28" Infeed LPS# 00105
Equipment Location:Yuma, TN
LPS Equipment & Acquisition Co.
731-986-4351
Cornell Twin Blade Edger 30 HP one static blade/ one moving blade Edge Right shadow line system
Equipment Location:Blowing Rock, NC
Carolina Used Machinery
828-773-2204
CORNELL 2 SAW EDGER W/INFEED & 30HP Motor
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Crosby 6" x 36" 2 Saw Edger with infeed and outfeed, 100HP Motor.
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351

Crosby 3 Saw Board Edgers

Call for Price
Crosby 3 Saw Edger 4" x 36"
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351

Crosby 2 Saw Board Edgers

Call for Price
Crosby 2 Saw Edger with 40HP Electric Motor Serial# 3941 42"
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351

Crosby Board Edgers

Call for Price
Call us today for more information on this Crosby Edger
Equipment Location:West Plains, MO
Global Wood Equipment
417-256-8131

Crosby 32A Board Edgers

Call for Price
CROSBY SIZE 32A 2 SAW EDGER
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351

Crosby Board Edgers

Call for Price
CROSBY SIZE 32 2 SAW EDGER W/INFEED, 40HP MTR S/N 33071
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351

Crosby Board Edgers

Call for Price
CROSBY 3 SAW EDGER W/100HP MTR
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351

Crosby Board Edgers

Call for Price
CROSBY 2 SAW EDGER W/INFEED, TAILING BELT, OUTFEED & APPROX 40HP MTR
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
We are selling a good condition, used Crosby Size 32 (by 4 Inch) board edger. The serial number is 2556T. The edger has the following features: • One stationary saw collar • One lever shifting saw collar (guide pin shift) with scale for lumber • One moveable fence that is positioned on the left side (when looking from infeed towards the outfeed) of the edger • One 2 3/16 inches diameter mandrel with bearings • Four (4) powered (belt) bottom feed rolls (approximately 3 inches diameter) and two (2) overhead pressure rolls (approximately 4 inches diameter) • Infeed table with three 4 inches diameter rollers mounted with pillow block bearings • Outfeed table (detached) with three 4 inches diameter rollers mounted with pillow block bearings
Equipment Location:North Wilkesboro, NC
Meadows Mills, Inc.
336-927-4663

Custom Built Board Edgers

Call for Price
PENDING
SHOP BUILT 2 SAW EDGER W/INFEED ROLLS
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351