• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
24 Results Found for Gang Edgers Viewing 1 - 20 of 24 results
STANDARD LISTINGS

Corley EH-648 Gang Edgers

Call for Price
Corley Combo Gang Edger Single Arbor with (2) 75HP electric Motors, Serial# EH-648-023, Very Nice Rollers.
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Corley 8" X 30" Gang Serial# 8-E-015
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351

Corley 6 inch Gang Edgers

Call for Price
•100 HP •Infeed •(6) set saws (non-moveable) •Setworks not on saw but manual •Non-Sleeved arbor set shaft (not original to the saw) •Infeed Coleman rolls •Collars included are worn but work •Infeed is manual and there is no outfeed with this The seller has confirmed that this is ready to load
Equipment Location:NC
Carolina Machinery Sales, Inc
704-288-1904

Cornell 641 Gang Edgers

Call for Price
CORNELL SIZE 641 GANG EDGER W/ 75HP MOTOR S/N 197 LPS# 00109
Equipment Location:Yuma, TN
LPS Equipment & Acquisition Co.
731-986-4351
Cornell Gang Edger, 36” x 8”, Model E825, S/N 04-99, w/ Board Tailing Device, w/ Gang Side Landing Plated Rollcase w/ Position Infeed Table w/ 250 HP Motor (Can be sold w/ Cornell Sharp Chain Scragg)
Equipment Location:Jamison, AL
Kittrell Sawmill Brokers and Appraisers
931-797-6284

Crosby Gang Edgers

Call for Price
CROSBY MDL 10679U SIZE 24U GANG EDGER W/INFEED ROLLS & 100HP MTR
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
CROSBY 8 X 48 COMBINATION GANG EDGER
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351

Crosby 636 Gang Edgers

Call for Price
Crosby Model 36 - 4 Saw Edger W/ Infeed, Serial# 30404
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351

Frick 636 Gang Edgers

Call for Price
Frick 636 Double Bay Gang Saw 6" Thick x 36" Wide
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
6" x 41" Frick Gang Edger, 2 Movable and 2 Stationary Blades,Infeed
Equipment Location:Yuma, TN
LPS Equipment & Acquisition Co.
731-986-4351
Hardy 8" Edger
Equipment Location:Moncton, NB
Graystone Quarries
506-961-2445
OPTIMIZED GANG SAW 12" HI-TECH TOP & BOTTOM ARBOR LINEAR POSITIONING OPTIMIZED GANG SAW, Scanner, Saws 12" HI-TECH TOP & BOTTOM ARBOR LINEAR POSITIONING OPTIMIZED GANG SAW, MOTOR
Equipment Location:Yuma, TN
LPS Equipment & Acquisition Co.
731-986-4351
KLAMATH MDL DAE 8' X 48" DBL ARBOR BULL EDGER; (2) 100HP ELECTRIC MOTORS
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351

Ligna Gang Edgers

Call for Price
Ligna 6 x 48 Combination Gang Saw W/ Positioning Infeed 200HP Motor, 22" Feed Rolls Each Side, Laser light Positioning.
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Quality Machine 8"X 12" Double Arbor GANG W/ (2) 100 HP MOTORS with 10" Wide Planer Head. LPS# 00107
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
SALEM 7" GANG SAW WITH 250HP MOTOR, 7' INFEED ROLLS, 8' OUTFEED BELT CONVEYOR 60" BELT - - $25,000 or Trade This is a good working industrial gang saw also known as a bull head edger. It quickly breaks down log cants into varied widths according to your needs. It has a 250 3 phase electric horse power motor along with 2 other motor which run the infeed and outfeed belt. It has not been used for 8 years. A hardwood mill in Alto TX. went out of business. It is currently still in place there. Now is a good time to act upon this deal as there is equipment ready to load an 18 wheeler flatbed so it can be transported to your location. It has been always under cover and is in good condition. Some time by the middle of March if it has not sold yet it should be moved to Custom Cut Lumber mill in Alto, TX. It will still be available for sale in Alto. The serial number; S/N 77-71892 New this gang saw goes for near $200,000 We are offering it for $25,000 We would consider trades of equal value. 65FT pre Min, on Mill The sale of the gang saw comes with; - 23 extra 25.5 inch blades as well as the saw blades currently attached. and 2 electrical boxes with breakers and switches that value near $3000 them selves. these are 1 Cutler Hammer 250 hp starter box and 1 Cutler Hammer starter box w/(3) size 1 and breakers. We accept major credit cards Rick cell 518-524-631nine secondary contact Randall's cell (325) 428-669five Mill office (936)858-280seven
Equipment Location:Alto, TX
Custom Cut Lumber
518-524-6319
SCHURMAN 4” TOP ARBOR EDGER: "Super Heavy Duty" would be an understated description of this machine. It features 50 HP on the arbor and a separate motor for the feed. There are 3 air shifting carbide saws in the 23" wide feed throat. 6 bottom and two top feed rolls. All powered. The top rolls have air lifts. All feed rolls as well as the saw portion of the arbor are chrome plated. A very well engineered, heavily built machine. $7,000.
Equipment Location:Wykoff, MN
Fillmore Sawmill Corp
507-352-6546
SCHURMAN MDL 8 DAS 30 DBL ARBOR GANG EDGER; (2) 75HP MTRS
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
SCHURMAN 32" X 16' EDGER, INFEED TABLE W/SHIFTING STRAIGHT EDGE
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351

Tierney Gang Edgers

Call for Price
TIERNEY 10' Gang Saw
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351