• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
245 Results Found for Feller Buncher Viewing 1 - 20 of 245 results

Circular-Saws

Band-Saw-Blades-Wide

Wear-Parts

Tools

Chipper-Parts

Wear-Parts

Chainsaw

Mechanical-Harvesters

Marking-and-Tally
Find More Supplies
PREMIUM LISTINGS
1995 Barko 775B, 22" saw head, new hydraulics, $17K in mtrs, pumps and parts, JD motor, Tires at 70%, $28,000 - 912-223-2247
Equipment Location:Brunswick, GA
Neal's Logging
912-223-2247
1997 Hydro-Ax 511E Feller Buncher. This machine has a 5.9 Cummins engine, runs and starts good, 22" Disc and Koehring head, good condition, tight pins and bushings. Strong hydraulics, newer hydraulic cooler, starter, alternator, and battery. 28Lx26 tires in good condition, heat, $40,000 518-572-6460
Equipment Location:Dannemora, NY
Tripp Logging
518-572-6460
670 Hydro-Ax w/22" saw, Joy Stick Controls, 28L X 26 Tires, 3100 Hrs., 502-477-8662
Equipment Location:Taylorsville, KY
Glasscock Sawmill, Inc.
502-477-8662
03 John Deere 853G, New Injectors, New Batteries, Lots of New Parts, U/C 40%, 22" Head, 4000 Hrs. on Engine, Will Trade for Skidder $54,000 812-267-6118
Equipment Location:Corydon, IN
Coffman Logging
812-267-6118
2011 John Deere 753J W/ Hotsaw, FS22B Saw Head, Woods Ready Only use on power line right of way $315000 318-448-8297
Equipment Location:Pineville, LA
H&R Contractors Inc
318-448-8297
2006 Tigercat Feller Buncher-12,000 hours on the frame/6,300 engine hours/ new under carriage with than less than 500 hours/ 28" SG Pads Tri Link/ Tigercat 5401 22" Saw-Good strong runner. Inquire at phone number 1-330-388-1435.
Equipment Location:Mantua, OH
Carlton Yarnell Chipping Service
330-388-1435
2013 TIGERCAT 720E FELLER BUNCHER, VIN/SN:5289 - TIGERCAT 5600 SAW HEAD, ECAB W/AIR, 30.5L-32 TIRES, METER READING 3,094 HOURS $130000 229-220-5047
Equipment Location:Climax, GA
Holmes Logging
229-220-5047
2013 Tigercat 726E, Feller Buncher, 75% on tires, 4200 Hrs, on the engine 5702 Sawhead on it, Woods ready $164000 870-356-9450
Equipment Location:Glenwood, AR
R & B Logging Inc.
870-356-9450
1993 Timbco T435 Feller Buncher Hrs,12041 $94500 828-284-8752
Equipment Location:Burnsville, NC
Ashe.Equipment
828-284-8752
1999 Timbco 415D bar saw head, new bar and chain, Woods Ready $61,000 618-334-2681
Equipment Location:millstadt, IL
618-334-2681
2006 Timbco 445EXL, Updated done at 4700 hrs., Pins & bushings in leveling system as well as pins & bushings in boom, Swing bearing, Swing drive, Complete undercarrage, Main pump, Saw pump, Track drive pumps, Hydro tank, Parker valves (ALL). All cylinders repacked and re-chromed, Every hose replaced, Rotate manifold, Gear drive refurbished, The hydraulic components were replaced not because of wear, the machine was sabotaged with oil dry dumped into the hydro tank. $155,000 obo Any other questions just call 317-563-2404
Equipment Location:fillmore, IN
John Collier Logging
317-563-2404
Good running 8.3 Cummins, 22 in Koehring hotsaw, Cold AC New glass, Lots of boom hoses and undercarriage parts, Resealed final, New batteries all in the last 500 hours of use. These repairs totaling over $15,000 Selling due to switching our operation to a bar saw unit.
Equipment Location:Fayetteville, AR
McPherson Logging Co.
479-422-8678
1994 Timberjack Feller Buncher with a 18"new Cummins remand engine. The undercarriage is 65/70%. Cold air. For questions please call 1-330-388-1435.
Equipment Location:Mantua, OH
Carlton Yarnell Chipping Service
330-388-1435
STANDARD LISTINGS
IN STOCK Woods Ready Machine! Quadco 20" Disc Saw. Please Call Larry Prater@865-599-9486
Equipment Location:Knoxville, TN
Power Equipment Co
865-577-5563
2004 643H FD45 Head, new hydraulic pump, saw pump, control valve built, tight and dry, almost NEW Tires $40,000
Equipment Location:Heflin, AL
Gaines Logging
256-283-3901
In Stock New 2016 Barko 240 Feller with Quadco 20" 360 Degree Hotsaw Head. Pro Heat and Counter Weight. Call us today for a quote.
Equipment Location:Constantia, NY
Kleis Equipment LLC
315-779-4636
Track Feller Buncher, it is in excellent condition and still has factory warranty left through 10/16 on the main structure only and Cummins engine warranty through 10/18. It does not come with a saw head. It is plumbed to run a hotsaw and is rated for up to a 20"... Hours: 1,290 Drive: Track Horse Power: 220
Equipment Location:Columbus, OH
Columbus Equipment Company
937-424-7678
CAT 563 Feller Buncher 2008 8600 hours
Equipment Location:Blowing Rock, NC
Carolina Used Machinery
828-773-2204
2016 BARKO 240, One of the last Tier 3s-NO DEF!!! 20" Quadco hotsaw w/ 360 rotation, 24" single grousers, rear view camera & reversible fan.
Equipment Location:Myerstown, PA
Golden Rule Timber
717-400-7061
GM 4-53 engine, hydrostatic drive, Koehring 20" sawhead; Tires:28L x 26
Equipment Location:Washington, NC
Eastern Equipment Brokerage
252-946-9264