• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
31 Results Found for Wood Finishing Viewing 1 - 20 of 31 results
STANDARD LISTINGS
BINKS - AA4000, ...Block-style Guns for mounting in automatic feed through Spray Machines. -- Simple design offers the benefits of Air-Assisted Airless. -- Better transfer efficiency; less bounce back; less overspray. -- Max. fluid presure of 4,000 PSI (275 Bar); max. air pressure of 100 PSI (6.8 Bar). -- Includes: (9) Parts Guns; there are no tips or air caps with the Guns.
Equipment Location:MIDWEST
EX-FACTORY INC.
704-841-2001
BLACK BROTHERS 22-D-875-44 Roller Coater44" Nominal length; 8-3/4" dia. applicator, Chrome doctor roll (not new), upper elevator and top only. -- Setup to 0" - 6" thick. -- Smooth EPDM applicator rolls and Chrome doctor rolls (not new in good condition with one line very small). -- Variable feed speed drive, passline height 34". -- Drip Pan, Feed Pan Can be Continuous Flow Trough to be Teflon Coated for 1,000.00$ . -- Trough for continuous flow 1" pneumatic pump and hose to supply product for 2,000.00$ more as an extra. -- There is a scraper blade for the Doctor roll as requested.Complete With: -- NEMA-12 Electrical enclosure, operating control bars, electrical interlocks, reverse lockout and drip (for clean out) pan.
Equipment Location:MIDWEST
EX-FACTORY INC.
704-841-2001
BLACK BROTHERS 22-D-875-56 Roller Coater56" Nominal length; 8-3/4" dia. applicator, Chrome doctor roll, upper elevator and top only. -- Setup to 0" - 6" thick. -- Smooth Chrome applicator rolls and Chrome doctor rolls. -- stationary feed speed drive, passline height 34". -- Drip Pan,Feed Pan,Continuous Flow Trough -- Trough for continuous flow 1" pneumatic pump and hose to supply product. -- 30 day warranty for workmanship and manufactures warranty for all parts used.Complete With: -- NEMA-12 Electrical enclosure, operating control bars, magnetic brake, electrical interlocks, reverse lockout and cleanup pan.
Equipment Location:MIDWEST
EX-FACTORY INC.
704-841-2001
BLACK BROTHERS 22-D-26 Glue Spreader or Roller Coater24" Working width, direct rubber covered applicator roll (available with 5-1/2", 6-1/2" or even 8-1/2" dia. rolls), driven chrome coated doctor roll, single handwheel doctor roll adjustment, variable speed drive. This is an in-line machine.Complete with: -- Push-button magnetic starter, safety guards, safety reversing bar and all warning labels.Subject to availability. Allow 4 - 6 weeks for delivery.
Equipment Location:MIDWEST
EX-FACTORY INC.
704-841-2001
BLACK BROTHERS 22-D-875-56 Roller Coater56" Nominal length; 8-3/4"www.tmackmachinery.com dia. applicator, Chrome doctor roll, upper elevator and top only. -- Setup to 0" - 6" thick. -- Smooth EPDM applicator rolls and Chrome doctor rolls. -- Variable feed speed drive, pass line height 34". -- Drip Pan,Feed Pan,Continuous Flow Trough to be Stainless Steel or Teflon Coated -- Trough for continuous flow 1" pneumatic pump and hose to supply product.Complete With: -- NEMA-12 Electrical enclosure, operating control bars, magnetic brake, electrical interlocks, reverse lockout and cleanup pan.
Equipment Location:MIDWEST
EX-FACTORY INC.
704-841-2001
BLACK BROTHERS 22-D-875-56 Roller Coater56" Nominal length; 8-3/4" dia. applicator, Chrome doctor roll, upper elevator and top only. -- Setup to 0" - 6" thick. -- Smooth EPDM applicator rolls and Chrome doctor rolls. -- Variable feed speed drive, passline height 34". -- Drip Pan,Feed Pan,Continuous Flow Trough to be Stainless Steel or Teflon Coated -- Trough for continuous flow 1" pneumatic pump and hose to supply product.Complete With: -- NEMA-12 Electrical enclosure, operating control bars, magnetic brake, electrical interlocks, reverse lockout and cleanup pan.
Equipment Location:MIDWEST
EX-FACTORY INC.
704-841-2001
BLACK BROTHERS 22-D-1175-56 Glue Spreader or Roller Coater56" Nominal length; 11-3/4" dia. applicator, doctor & feed rolls, lower elevator. -- Setup to 0" - 4-1/2" thick. -- Neopreme applicator rolls 16 TPI and Neopreme smooth doctor rolls. -- Single feed speed drive, passline height 30".Complete with: -- NEMA-12 Electrical enclosure, operating control bars, magnetic brake, electrical interlocks, reverse lockout and cleanup pan.Can convert to upper eleavator for an additional priceCan Convert to Variable Speed for an additional price4-6 week on complete rebuild
Equipment Location:MIDWEST
EX-FACTORY INC.
704-841-2001
BLACK BROTHERS - "490-62", ...Top/Bottom Brush Panel Cleaner.62" Working width (actual net brush measurement width is 66") Top & Bottom Panel Brush Cleaner,. -- Upper elevator adjustment with 0" -3" opening; 30" standard passline height after removing the raiser blocks. -- 750 FPM Brush rotation speed. -- 3 HP Variable speed feed, aprox. 30 - 125 FPM with 1 HP - 1,725 RPM drive; (2) 3-1/2" dia. infeed and (2) 3-1/2" dia. outfeed rolls. -- Complete with: Barrier guard; Heavy Duty welded steel plate construction.NOTE: Current photos show machine still in service. - Unit now in EXF warehouse & service facility; ...will be "refurbished, thoroughly serviced & painted".
Equipment Location:MIDWEST
EX-FACTORY INC.
704-841-2001
BOUSQUET SDM 100 Air Make UP Unit with Dual Speed Direct fired Make-Up Air Unit rated for maximum 800,000 BTU/HrFeatures & Includes:G90 14G formed frameReinforced fiberglass insulationPull-out doorsSturdy 20G galvanized constructionAluminum/stainless steel burnerAdjustable profile-platesBrand name controls and componentsLow velocity inlet hood with filtersCapacity & Specs: -- Main motor 7.5 HP -- 4,000 / 8,000 CFM -- Propane gas burner -- Control voltage 110V, single phaseNote: Actual model: SDM 100-E-RH-TDH-MPC
Equipment Location:EASTERN CDN
EX-FACTORY INC.
704-841-2001
Burkle SLC 1300 Stain Roller Coater with Sponge RollerStain Application Machine to coat Wood Flooring (Parquet) or flat panels of any kind - wood, plastic or steel. Uses UV, Water base, and Solvent base stains of all types. Setup with a Stainless Steel fluid re-circulating system.Specifications: -- Working height of 38". -- Working width of 53". -- Work piece thickness up to 3". -- Application roll with a diameter of 9-1/4" and currently with a sponge roller. -- Chromed doctor roll with diameter of 6-1/2".Variable feed speed; independently controlled applicator and chromed doctor roll's for maximum coating adjustment. Rated power capacity of 6.9 kW and Compressed Air requires 6 bar (85 PSI) line pressure.
Equipment Location:NORTHWEST
EX-FACTORY INC.
704-841-2001
BURKLE - SLC 1600, ...Roll Coater.Lacquering Machine to coat Wood Flooring (Parquet) or flat panels of any kind - wood, platic or steel. -- Uses UV, Waterbase, and Solvent base coatings of all types; setup with a Stainless Steel fluid re-circulating system.Specifications: -- Working height of 38"; working width of 65" and workpiece thickness up to 3". -- Variable feed speed; independently controlled applicator and doctor roll's for maximum coating adjustment. -- Application roll with a diameter of 9-1/4" and currently with a softer rubber (estimate at 45 shore); doctor roll with diameter of 6-1/2", steel. -- The rolls are in "like new" condition, still with paper wrapping! -- Rated power capacity of 6.9 kW and Compressed Air requires 6 bar (85 PSI) line pressure.
Equipment Location:MIDWEST
EX-FACTORY INC.
704-841-2001
DEIMCO BC-383889 Adhesive/Spray Application System. Unit is currently setup for adhesive application (less pump/nozzles) but can also be retrofitted to a Feed Thru Fluid Spray Finishing Unit (single or multi-head) by the addition of a diaphragm pump, spray guns/mounting hardware and recovery cabinet for the overspray. -- Included Options: (1) Enclosed Semi-Down Draft Spray Booth; Side Out Filter (1) USC-1000 Upline Gun Control; Allen Bradley Micrologix PLC; Allen Bradley Panel View ; Manual/Off/Auto Gun Trigger Selector. -- Feed Unit: (1) Filament Conveyor with (9) Individual Filaments on 1" Centers; Inverter Speed Control w/Digital Display; Filament Cleaning System. -- Comes with: DWYER differential pressure gage monitoring filter condition. Air Requirements: 90 PSIG, 5 CFM. -- Operation: The parts move through a photo eye bank ahead of the spray booth. These photo eyes map the part location for automatic gun spray application. The overspray is collected in catch trays with exhaust air filtered by a dry filter media bank.
Equipment Location:SOUTHEAST
EX-FACTORY INC.
704-841-2001
DEIMCO MFM-98 ACRYLIC COATING FINISHING SYSTEM: -- Specifications:Drying Oven for the purpose of baking and drying the acrylic finish onto lumber and panel products. 3” dia. x 21.625" long Rollers on 12” centers; Infeed: 16' long In-feed Conveyor, 12' long Transfer Conveyor, 17' long Oven Conveyor: -- Operator & Machine Control:Built with Allen Bradley/Honeywell Components, MFM Serial: 1177, Voltage: 460V/60 Hz/25 Amp, Air: 1” NPT 90PSIG -- Complete With:Electrically Heated Oven; 8 Cool Down Fans; 2 - Hydraulic Lift Tables; Panel Machine with Hydraulic Pump; 15’ Flash Off Conveyor; 40’ Cool Down Conveyor Includes the following for (two) flood coat machines, Conveyor System, Arbors, Paint Pump, Hydraulic Pump, Hydraulic Lift Table -- Options Include:Spray Booth (With 3 Graco Hydra Spray Guns); Bull Dog Dura-Flo Air Motor (33-1 Ratio) w/ Air Compressor; Graco Extreme Lower Paint Pump; Double Diaphragm Paint Pump -- Foot Print:Complete Over-all Foot Print 175’ long x 50’ wide
Equipment Location:NORTHWEST
EX-FACTORY INC.
704-841-2001
DUBOIS RSM Rotary Spray System (ideal for Flatline Coating for Siding); 66" Width capacity, 68" W Powered belt, 2 HP drive motor. -- (16) Rotary gun capacity (8 guns installed), 66" x 90" x 5" spray area (approx). -- Equipped with: Automatic belt cleaning system, (2) NY Blower "20PLR" extraction fans. -- Spray pots, pumps, gauges and etc. included as pictured.Spray MachineFinishing Enclosure ● Painted and powder coated metallic cabin with 6 doors fitted with safety glass and safety interlock that stops rotation when doors are opened ● (4) Access and viewing door panels, two at each end ● (2) 4-Tube fluorescent light fixtures with bulbs sealed from cabin through safety glass ● UHMW polyethylene and stainless edging for the cabin for easy overspray cleanup ● Extraction fan through dry filtration and Air makeup fan delivering filtered air to the cabinRotating Carousel● (1) Rotating carousel equipped with (8) arms, powder coated for easy cleanup● Each arm is fitted with mounting system for (1) Automatic gun with adjustable angle pivot, multiple positions● Gun tracking plate which assures correct alignment of the guns across the entire arc over the parts● (1) Rotary seal with (3) chambers, two for the compressed air delivery and (1) for supplying the coating● 1 HP gear reduced motor driving the carousel, through timing belting, speed tracked by position sensor and speed calibrated by precision motion sensor● Adjustment of rotating speed via touch screen interface on control panel● Motorized height adjustment of the carousel including upper and lower travel limits via motor and gear reductionPneumatic Control● Air filtration and regulation on incoming shop compressed air● (8) Individual atomizing air controls mounted to the arms for convenient point of use adjustment● Compressed air supply to the control module mounted on the bottom of the carousel for triggering control of individual guns via electronic control.Coating Application Equipment● (8) Automatic spray guns with tip● (1) Piston Pump● Fluid supply and return hoses mounted to a free standing pump rack● All fluid fittings, regulators, back pressure valves, and pickup tubes.Computer Control● Master control panel with fused disconnect and safety interlock● Color touch screen with operator interface which includes manual triggering of guns, height adjustment, circuit selection and readout of conveyor speed. Also includes machine diagnostic system for fault detection and adjustment specifications● Photocell light curtain with receptor cells arranged linearly to allow for precise detection of parts being conveyed● SIEMENS PLC system to obtain position information from light bridge coupled with belt speed encoder which allows precise position information usedto trigger guns on and off where parts are located● Sensitivity adjustment to modify part detection
Equipment Location:WESTERN CDN
EX-FACTORY INC.
704-841-2001
66" width capacity, 68"W Powered belt, 2 HP drive motor, (4) edge spray gun capacity (2 guns installed), 66" x 90" x 5" spray area (approx), automatic belt cleaning system, automatic belt cleaning system, NY Blower "70PLR" extraction fan. -- (1) spray pot, (3) diaphragm pumps, regulator & gauges. -- The (2) front and back spray heads are included and installed.
Equipment Location:EASTERN CDN
EX-FACTORY INC.
704-841-2001
66" width capacity, 68"W Powered belt, 2 HP drive motor, (6) edge spray gun capacity (no guns installed), 66" x 90" x 5" spray area (approx), automatic belt cleaning system, automatic belt cleaning system, NY Blower "70PLR" extraction fan. -- Spray pumps and etc. as pictured included. -- Note: Seller has added a seperate control pannel and front and back Reciprocating Spray Heads.
Equipment Location:EASTERN CDN
EX-FACTORY INC.
704-841-2001
GFS Crossdraft Spray BoothLarge Walk In Spray Booth
Equipment Location:SOUTHEAST
EX-FACTORY INC.
704-841-2001
GIARDINA DUALTECH. - Automatic Reciprocating Spray Machine up to 1,600 mm working width:This Machine will be fully recondition before shipping by a specialized Giardina team.GIARDINA Automatic Reciprocating Spray Machine. -- Flexibility and quick changeover with a limited investment. -- The machine is suitable for the spray application of stain, base and top coats on every type of surface. -- Conveying System: Pieces are moved on a PVC perforated conveyor that supports the throwaway film (it can be made of paper, Polyethylene or other suitable material to work with); system is complete with wrapping/unwrapping coil. -- The coupling between the belt and PVC conveyor, and suitable moving of the pieces is ensured by a vacuum system; a roll extension at the inlet & outlet side loads/unloads easier pieces if made directly by the machine. -- Application Unit: (2) Opposite reciprocating damped units, the movement is carried out through synthetic toothed belts and anti-vibrating device. -- (2) Vertical gun arms for a maximum of (4 + 4) guns; (2) spraying circuits for (2 + 2) "Airmix" guns including the return section to allow quick washing (no guns or pump included). -- Machine controlled by PLC series "TXS57" include: Reading Bar at the inlet side to automatically read the width of the set of panels. -- Paint Pot kit for limited quantity paint spray (for low pressure guns only). -- Spray Booth: Room has carbon structural steel and pre-lacquered & shaped sheet panels; air recycling system in the internal part of the booth is complete with axial fan and filter on the spray booth ceiling. -- Suction Unit: Dry finishing fumes are sucked up by (2) pipes on the conveyor side with trays, prefilters, and final filters; fumes are exhusted by means of a fan. -- Control by: Electronic control unit with keypad; machine function control is carried out by means of a PLC series "TXS57". The operator can choose on the keyboard the panels working width and guns will be automatically chosed & opened. -- A photocell in the center at the conveyor inlet side reads the piece and guides the opening & closing amplitude on the piece. Explosion proof lighting either in the Spray Booth or the post-chamber. -- Adustable reciprocating unit speed of (20 - 30) cycles/Min; adjustable conveyor speed from 1 - 5 MPM.Technical Specifications: -- Overall dimensions: 4,300 x 4,000 x 2,700 mm (l x w x h) (169" x 158 x 142"). -- Overall dimensions of electrical cabinet: 1,000 x 600 x 2,000 mm (l x w x h) (40" x 24" x 80"). -- Installed Power: Approx. 18 kW. -- Compressed Air Supply: Approx. 150 Lt/Min (excluding Guns and Pumps). -- Volume of air to be exhausted: Approx. 14,000 m³/Hr (8,230CFM).Actual Model: GIARDINA "Dual Tech 305" ....and the Price is "Delivered to US or Canadian Port".
Equipment Location:MIDWEST
EX-FACTORY INC.
704-841-2001
GIARDINA Moulding Finishing Line consisting of MCD/3 Vacuum Coating machine, GST SPC UV Drying Lamps Patented vacuum application system that can apply stain, lacquers, UV sensitive and water-based products to profiles of linear parts, regardless of the shape of the material profile. Flexible and adjustable for staining, basecoating, sanding, and top coat finishing. GST UV Lamps cure the material. Line was previously used to finish Basswood Venetian Blinds capable of 50,000 lineal feet per day.Vacuum Coater/GST SPC UV Drying Lamps: -- MCD/3's die plates can easily be changed for many styles of profiles and changed-out from one to another in (5) Min to minimize downtime. -- Using this die system you can be very precise as to where it will apply the finish on the product. -- Max. line speed of up to 120 FPM (on 4-sided pieces of 36" - 47" line speed.is reduced to 92 FPM). GIARDINA SPC Dryer with 301/8 type UV lamps - (4) top and (4) bottom lamps are 11.8" (300 mm) of 160 W/cm intensity.General Description: -- The GIARDINA main components are: Variable Speed Conveyor, Stainless steel tank for product application, Adjustable vacuum unit with filtration, Stainless steel head equipped with template (one for each profile) Soundproofed enclosure, Sound dampened double-membrane vacuum pump, Coating supply circuit with an 11 kW pump motor, filter, safety valve, control valve & adjustment gauge. A 3 kW pre-heating device installed on coating supply line. Recovery pump unit which recycles the excess coating material. -- Drying Hood Type GST: houses the (8) top/bottom GST UV units composed polished aluminum reflectors with respective GST UV lamps and suction/exhaust fans. -- The machine is operated by means of programmable PLC, with general control unit TELEMECANIQUE equipped with: (12) Function keys actuated by the operator, 40-character alphanumerical display, numerical keys & service keys. -- The display controls operator startup procedure, warns him of any active alarm. Floor standing electrical panel houses remaining components as main switch, contactors, fuses, remote-control switch, and automatic thermal relays, etc.Size Capacity: -- The Min - Max length of part that can be run is 36" - 72"; Min - Max thickness is 1/16" (1.59 mm) - 1.5" (38.1 mm); Min - Max width is 1" - 3.5" .Options Included: -- Spare Vacuum Coating Head - Precision slide-out track on machine frame for head removal (two heads allows one for cleaning or maintenance); Adjustable holddown rollers between Coater and UV Dryer; 3 KW EEXD Electric pre-heat of supply circuit, thermostatically controlled from 20 - 80 °C; Lacquer filter with manual bypass circuit; INOX (stainless steel) filter 600 x 600 x 1600 mm high; Digital reading of feed speeds on MCD & SPC with variable speed potentiometers and memory settings. The Machine in compliance with CE Safety Standards. -- Vacuum Coater approx dimensions: 24' x 7' x 7'. -- Construction: The heads are mounted on c
Equipment Location:EASTERN CDN
EX-FACTORY INC.
704-841-2001
GIARDINA G0208 Reverse Roll Coater with 53" Width capacity:3-Roller machine with 1 HP double diaphram pump; material thickness from 1/8" to 3-1/2"; includes infeed & outfeed conveyor extension. -- Equipped with: (1) 10-1/4" Dia. rubberized spreading rollers with 2nd. 6-1/2" dia. chrome plated steel roller for dosage. -- 3rd Head assenbly with (1) 10-1/4" Chromed Steel Smoothing Roller in "reverse" UV filler, each of the (3) rollers with its own 1 HP drive motor. -- Feed System: Electronically controlled variable conveyor speed 24 - 123 FPM, 2 HP feed drive motor. -- Complete with: 1 HP Pump motor, 0.5 HP motor for blade oscillation; reservoir tank and explosion proof electrics.
Equipment Location:SOUTH
EX-FACTORY INC.
704-841-2001