• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
51 Results Found for Gang Rip Saw Viewing 1 - 20 of 51 results
STANDARD LISTINGS
CAM-WOOD TRS 150S Frame SawThe CAM-WOOD Frame Saw is engineered and designed to make extremely accurate cuts, cutting products with very tight tolerances up to 0.004" and eliminating sanding before proceeding to the next step in production. The unique thin frame saw design accepts different saw frame and blade combinations and allows multiple saw fence configurations to produce single, double or multiple cuts in a single pass.Specifications: -- 3/4" Min. to 6" max. working width; 1-1/4" min. to 7-3/4" max. working thickness; finished material > 0.1094". -- 0.043" to 0.055" Saw blade thickness; runs up to (22) blades at one time at (450) stroke/Min with a 8-1/4" stroke length; accommodates blades 1.575" wide x 19.685" long. -- Saw blade frame is powered by a 15 HP motor. Feed speeds of 1 to 5 FPM by 1 HP motor. -- Features automatic oil lubrication system requiring 90 PSI air pressure. Cooling system via water and air. -- Minimum kerf multi-blade frame saw designed to maximize production and minimize material loss. -- Machine supplied with PLC controller to allow operator fast, instant set-up changes. -- All controls are centrally located for the operator to easily adjust & control operation. -- Material waste reductions of up to 20% are achievable by use of the thin kerf blades (0.043" ~ 0.055"). -- A special air blast system cools the blade for longer service intervals and removes saw dust from the gullet of the blade to reduce temperature and increase blade life.Note: The rigid saw blades frame is available in different configurations.
Equipment Location:WEST COAST, AL
EX-FACTORY INC.
704-841-2001
CAM-WOOD TRS-80F Frame Saw for "Thin Cutting"3/4" Min. to 7-3/4" max. working width; 3/4" min. to 3" max. working thickness; finished material > 0.118.Specifications: -- 0.047" to 0.065" Sawblade thickness; runs up to (16) blades at one time at 400 stroke/Min with a 6.3" stroke length; accommodates blades 1.575" wide x 19.685" long. -- Saw frame is powered by a 20 HP main motor. Feed speeds of 12", 19", and 37 IPM by 1, 1-1/2, and 2-1/2 HP motor. -- Includes Automatic Oil Lubrications system requiring 90 PSI air pressure. Cooling system via water and air.Features: -- Minimum kerf multi blade frame saw designed to maximize production and minimize material loss. -- Thin frame saw design accepts different saw frames & blade combinations. -- Unique design allows multiple saw fence configurations to produce single, double or multiple cuts in a single pass. -- Machine supplied with PLC controller to allow operator to maximize saw production & minimize down time. -- Production times are reduced because of the machines durability to consistently produce. -- Saw is engineered and designed to make extremely accurate cuts, cutting products with very tight tolerances up to 0.004" and eliminating the sanding before proceeding to the next step in production. -- All controls are centrally located to permit operator to easily adjust & maintain the machine. -- Material waste reductions of up to 20% are achievable by use of the thin kerf blades (0.043" ~ 0.055"). -- The rigid saw blades frame is available in different configurations. -- A special air blast system that cooling the blade for longer service intervals & removes saw dust from the gullet of the blade for reduce temperature and increase blade life.
Equipment Location:WEST COAST, AL
EX-FACTORY INC.
704-841-2001
CAM-WOOD TRS-2120 Heavy Duty Dip Chain Gang RipsawThe TRS-2120 Rip saw is manufactured to precise tolerances, and features the newest designs for operator safety and volume production.Features: -- 50" x 68" Cast Iron frame for perfect stability. -- Straight line caterpillar type feed chain with heavy guides; chain blocks made of special cast iron, heat treated & precision ground pins. -- 70 mm Nickel chrome steel saw arbor with double keyed quick change sleeve. -- Precision fence for absolute accuracy between blade & fence, with precision measuring gauge. -- (3) Sets of anti-kickback fingers, (2) top, (1) bottom. -- Powered rise & fall of the pressure rollers -- Automatic centralized lubrication system, automatic Star-Delta starter (slow speed start), and low voltage controlsSpecifications: -- 6-5/8" Max. thickness; min. length 29"; 13-1/2" usable saw sleeve length; 13-1/2" between outside saws. -- Throat depth (max. distance to the right of the 1st blade is 12") 10" to 20" sawblade dia.; 70mm saw arbor with (2) keyways. -- 75 HP saw arbor motor with belt drive to the 2,600 RPM with powered pressure rollers (rise/fall); 8 to 80 FPM feed speeds via 4 HP feed motor. -- Double anti-kickback fingers mounted at the in-feed side provided maximum safety protection. -- Variable feed speed to match different requirement of material. -- V-way track and chain block surface are heat-treated for long wear resistance. -- Automatic lubrication to V-Way track facilitates chain running smoothly. -- The auto lubrication device is equipped with an alarm that sends signals upon a lack of lubrication oil. -- Precision built saw head assures accuracy for straight line rip saw operations. -- Four bearing spindle mount ensures rigidity & long life. -- (4) Pressure rollers & (2) hold-down plates for precise cutting of large and small work pieces. -- (10) V-Belt ARBOR DRIVE ensures maximum motor output and guarantees heavy duty multiple rip cutting. -- The saw arbor is manufactured form NI-Cr-MO alloy steel for durability, heat treated, precision ground, balanced providing precise cutting performance. -- Adjustable guide rollers make cutting straight for slight radials material. They also secure glue joint on short pieces or long stacks.
Equipment Location:WEST COAST
Jeff Terrill
800-374-5009 ext:349
CAM-WOOD XL 300 Dip Chain Gang Rip Saw: 12" Width cap.; 4-3/4” max. cutting depth; 14” min. stock length;Specifications: -- 70 mm Dia. saw sleeve (one is included) with (2) keyways and the following spacers: (4) 15 mm, (4) 10 mm, (18) 1 mm, (10) 0.5 mm, and (8) 0,25 mm (see drawing after the "literature link); with 12” useable cutting width. -- Accepts saw blades from 12” to 14” dia.; arbor is powered by a 50 HP motor driving the spindle at 3,200 RPM. -- Feed chain is powered by a 2 HP motor with variable chain speeds from 30 to 100 FPM; feed chain is 12” wide. -- Table is 30” wide x 62” with 12” between the column and the 1st saw blade. Integrated 6” dia. dust extraction connection.General Description: -- Designed for high quality production line use. CAM-WOOD’s Rip Saws are manufactured to precise tolerances and feature the newest designs for operator safety and volume production. -- Precision fence ensures absolute accuracy between blade & fence, equipped with measuring ruler gauge. -- Double anti-kickback fingers mounted at the infeed side provide maximum safety protection. -- Heavy-duty industrial motor for powerful cutting capacity. -- Ruggedly constructed cast iron frames for durability usage.Feed System: -- Variable feed speed enables the machines to meet different requirement of work. -- V-way track and chain block surface are heat-treated for long wear resistance. -- Automatic lubrication to V-Way track facilitates chain running smoothly. -- Auto lubrication device is equipped with an alarm that sends signals upon a lack of lubrication oil to increase the durability of the machines. Features & Equipped with: -- Precision built saw head ensures accuracy for straight line rip saw operations. -- (4) Bearing spindle assembly ensures rigidity & long life. -- (4) Pressure rollers & (2) hold-down plates for precise cutting of large and small workpieces. -- 10-Piece V-Belt for maximum motor power output and guarantees heavy duty multiple rip cutting. -- The saw arbor is manufactured from NI-Cr-MO alloy steel for durability and anti-fatigue, heat treated, precision ground and balanced providing precise cutting performance. -- Adjustable guide rollers make cutting straight or slight radials rip cuts. They also firmly secure lumber to the feed chain for glue joint work on short parts or long lumber. Options: -- Additional saw sleeve, ...$990 -- Power raise & lower of the holddown system when ordered with the machine, ...$1,500
Equipment Location:WEST COAST
Jeff Terrill
800-374-5009 ext:349
CANTEK-LEADERMAC SYC 300M Heavy Duty Roll Feed Ripsaw: Features & General Description: -- Cast Iron base with easily accessed Anchor Bolts; lift up sound enclosure with light for quieter and safer operation; Hydro-Loc Outboard Bearing System for best gang sawing shaft support, includes grease gun; HD Cardan shaft feed (chainless) drive throughout. -- (6) Full width, close coupled driven top feed rollers; (4) full width driven bed rollers; top rolls are air tensioned; variable pressure controls on top feed rolls; motorized lift to top rolls; infeed table is hard chromed with approx. 0.012” - 0.014” chrome. -- Easily adjusted roll holdover on the infeed table; saw spindle has motorized lift and lowering; multiple HD V-belt driven saw spindle with special HD belt tensioner; saw blades cut from below, hence better dust removal and a heavier sturdier design. -- Saws are pre-mounted on a slip-on sleeve for quick change; (3) sets of anti-kickback devices included; central lube system; pneumatic pressure controller safety switch – if air pressure to the top rolls drops below the set to run level, the feed will automatically stop. -- Controls include: VFD Control to feed speeds and Digital Speed Readout in FPM or MPM; TECO-WESTINGHOUSE main electric motor; I.E.C. – TELEMECANIQUE-SQUARE-D Electricals meet or exceed UL/CSA Standards. -- Machine is equipped with WYE-DELTA Soft-Start (low Amperage) starters & main disconnect, multiple “E-Stops" operate at low amperageSPECIFICATIONS: -- Max. thickness, 5.1” (130 mm); Note – to 4-1/2” with std. 14” diameter blades; to 5.1” with optional 16” Blades. -- Saw sleeve usable length of 12.3” (312 mm) - max. dist. between outside saws; minimum length material, 10” (250 mm) – at slower speeds. -- Saw Blades with 10” min. to 14” max dia. x 70 mm Bore (double key), 16” (400 mm) optional – no charge; Saw spindle with 50 mm dia. runs at 3,200 RPM; Saw sleeve – included, 70 mm OD with double keyways. - Includes (1) set of spacers. -- Main Motor – 75 HP (50, 60, or 100 HP optional); top feed rolls – rise & fall, 1 HP; Feed Drive of 7.5 HP with VFD infinitely variable speed control, 20 to 165 FPM (6 to 50 MPM) to 200 FPM – 60 MPM – optional). -- (4) 150 mm Dust collection outlets; approx. weight – net, 5,060 Lbs.; WYE-DELTA – low Amperage - Soft Start for main motor starter; electrics to UL/CSA Standards and wired to 230/460 or 575/3/60. - Note: Stock machines are with 50 HP – 460/3/60 electrics machine and can be easily and inexpensively transformed to other voltages.Optional Extras. -- 75 KVA Auto Transformer to run machine on 230/3/60 electrics, please add ...$ 2,045. -- 16” (400 mm) Dia. blade with 5.1” max. Thickness N/C; NOTE: – Contact us to see if stock machine has this capacity. -- Extra Saw Sleeve, add ...$ 995. -- Additional Sets o
Equipment Location:PACIFIC NORTHWEST, AL
EX-FACTORY INC.
704-841-2001
LAUDERDALE-HAMILITON MBR-10 Roll Feed Gang Ripsaw: Saw arbor with 40 HP arbor motor (20 HP, 25 HP, and 30 HP available). -- 1-15/16" Saw arbor bearings and 10" usable arbor. 12" useable arbor available. Uses 12" dia. x 1-3/4" bore saw blades. -- 1/8" to 2" Max. cutting depth on hardwoods and softwoods; removable and replaceable phenolic throat plates. -- Unique “swing down arbor frame” for easy and fast blade changing. Blades positioned using spacers. Feed system with: -- (2) 1 HP Feed motors with constant feed speed to be determined from thickness of wood, type of wood, and maximum number blades (average speed is set at 78 FPM). -- (6) Non-marking steel drive rollers; top and bottom rolls are powered for superior feeding capabilities; hand crank for easy feed roll height adjustment. -- Includes safe, fully enclosed belt and chain guards and double anti-kickbackNote the Features: -- Simple design, low cost, high performance. -- High production, fast setup, workhorse. -- Off-The-Shelf Parts for ease of maintenance.Options: -- Variable Speed Drive with speeds from 10 to 100 FPM, add $2,150 -- 20 HP - $21,800 -- 25 HP - $22,800 -- 30 HP - $23,800 -- 12" useable arbor space, add $2,500 -- 12" x 24T Blade,1.75" Bore, $115 -- 12" x 30T Blade,1.75" Bore, $115
Equipment Location:SOUTH, AL
EX-FACTORY INC.
704-841-2001
CANTEK MRS 300 Multi Blade (Gang) Rip Saw: General Description: -- Frame is Cast Iron, all the main parts are enclosed, ensuring protection and perfect stability. -- Straight line caterpillar style feeding with heavy guided chain. Chain blocks are special cast iron with heat treated & precision ground pins. -- Nickel chrome steel Saw Arbor with 70 mm OD – dble. keyed quick removal sleeve.Features & Includes: -- (3) Sets of Anti-Kickback Fingers (2) top, (1) bottom. -- Powered Rise & Fall to the pressure rollers. -- New style round Fence Bar support with quick shift long fence. -- Automatic Centralized lubrication system. -- Automatic Star-Delta Starter (slow speed start) and low voltage controls. -- C.E style European guard & safety features. -- Long fence for control of long material. -- Electrics to 230/460 or 575 Volts, 3-Phase, 60 Cycles.Specifications: -- Max. Working Thickness, 4 5/8” (120 mm) with 15” Blade diameter. -- Min. Length, 20” standard or 12" with short stock attachment. -- Saw Sleeve Usable Length(between outside saws), 12" (305 mm). -- Sawblade Dia., 200 to 350 mm (8” to 14”). -- Saw arbor Sleeve OD (Diameter), 70 mm; Saw arbor diameter, 50 mm. -- Saw arbor vertical adjustment, 3.6” (90 mm).Equipped with: -- 50 HP Saw Motor – Saw Arbor Speed 3,800 RPM. -- Powered Pressure Rollers (Rise/Fall), 1/2 HP motor. -- Feed Speeds 25 - 100 FPM (8 - 39 MPM); Feed Motor with 2 HP drive. -- (2) 6” Dia. Dust Hood. -- Table Size, 30” x 60"; Table Height from floor 33.5".Other Information: -- Net Weight, 4,510 Lbs, Shipping Weight, 5,060 Lbs - Machine Dimensions, 82.68” 59” x 56.5", Shipping dimensions, 71” x 67” x 63”. -- Included: (1) Removable saw sleeve, (1) Set of (38) spacers; NOTE: Saw blades not included.Optional Extras: -- Short Stock & Thin material cutting attachment, 12" (300 mm) min. length & 3.75" (95 mm) max. thickness (can be added and/or used at any time), required for high accuracy cutting, ...$ 595. -- 20MW Laser (FP MLC1320W) & Laser Holder with 6” Bolt on Base Stand, ...$ 595.00. -- Single Blade Mechanical Quick Lock Collars that can be used on the 70 mm sleeve for individual blade quick setting and locking process (no spacers required) – This is desirable especially if you have to quick change from size to size and you don’t have the spacers to run a special size of product, (each) ...$ 180. -- Extra for spare saw sleeve ...$ 370 -- Extra for spare set (38) of spacing collars ...$ 390. -- 75 KVA Auto Transformer for 230 Volt operation, On request.
Equipment Location:PACIFIC NORTHWEST, AL
EX-FACTORY INC.
704-841-2001
CANTEK MRS-340M-1 GANG RIPSAW WITH (1) SHIFTING BLADE and the following specifications and features: -- Capacities are: 4.3" Max. thickness with 14" dia. fixed blade(s); 3.3" with 12" fixed blade(s); 4" with 14" moveable blades and 2.95" with 12" moveable blades; 13.4" max. working width between outside saws. 25.6" max. overall width; 5.5" max. distance to fence from inside fixed blade; 0.59" to 13.38" max. saw travel; 23-1/2" min. stock length; 19.7" possible with optional short stock holddodwn (reduces thickness capacity. -- With 70 mm dia. x 13-3/4" long saw arbor powered by a 50 HP motor driving the blades at 3,800 RPM; 3 HP feed motor provides feed speeds from 15 to 135 FPM; 1/2 HP lift motor for hold-down roll; infinitely variable saw shifting speeds from 0.78" to 3.15" per second; (2) 15 mW laser lights; (2) 12" or 14" dia. x 90 mm bore blades; 72" x 31" table size sits 30" from the floor. -- Features include cast iron main frame with main parts enclosed to ensure protection and perfect stability; HD precision straight line caterpillar type feed chain with easily replaceable bolt-in cast steel or Urethane chain ads (optional); fully programmable position sets (10) programs of (10) sets each or infinitely variable foot pedal position set; user friendly Touch Screen control (free standing operators control console) is integrated with 32 bit micro processor and (2) RS232 ports for incredible positioning speeds and EXACT blade positioning. -- Touch Screen with full and easy programming capabilities and joystick control; saw blade positioning is accomplished by industrial series Servo Motor and control; blade speed is infinitely adjustable from 0.78" to 3.54" IPS to match all operations; blade positioning can be initiated by electronic joystick control (efficient & quick) or the touch screen controls. -- Equipped to shift (1) saw independently or (2) saws per shifter (optional as a cluster) or with a single or bank of saws with spacers can be set up on the inside of the saw arbor to gang rip if desired. New short stock cutting device included -- Top pressure roll system is electronically positioned from the front control panel for lumber thickness; includes position readout; top roll hold down system is mated to the servo positioning short stock shoe to provide optimum straight line ripping and safety; top rolls are spring tensioned and tension is adjustable (pneumatic pressure is optional). -- Specially designed and Patent Pending Precision Glide Lock with nickel chrome steel saw arbor with super technology for easy maintenance and free saw shifting; (2) shifting saw bushings are equipped with specially designed rollers for most accurate and very fast saw positioning. -- (3) Rows of anti-kickback fingers; variable feeding speeds from 16 to 135 FPM inverter motor and speed control with LED readout; electronic overload sensing system is integrated to the inverter feed system providing automatic speed reduction under heavy amperage load.
Equipment Location:PACIFIC NORTHWEST, AL
EX-FACTORY INC.
704-841-2001
MEREEN-JOHNSON MODEL 424 DIPCHAIN GANG RIPSAW -- 24" Arbor width cap., 14" max. dia. tooling, 3-1/2" max. motorized thickness adjustment, 29" min. length for glue joint accuracy and 22" min. for busting only, 6" throat. -- Equipped with: 75 HP - 3,600 RPM TEFC direct drive motor, arbor with disc brake & load meter, arbor lockout on access door. -- Feed & chain: 5 HP Variable feed speed 30 - 170 FPM with adjustable jam protection, M-J "Posi-Feed" dip bed carried on 5" pitch hardened double-V chain, "Quad Life" hardened dip cams, extruded structural aluminum feed bed slats with replaceable steel backed rubber insert strips, automatic chain oiler with low level shutoff. -- Complete with: (4) 3" dia. air loaded overhead pressure rolls; full width spring loaded overhead bed plate, pressure rolls & bed plate unit with powered adjustment; with scale & pointer for thickness reference; anti-kickback finger system with (1) lower & (2) upper on infeed, (1) upper assembly on outfeed. -- Includes (1) Saw Sleeve and spacer set
Equipment Location:MID ATLANTIC
Jeff Terrill
800-374-5009 ext:349
CANTEK MRS-340-2 Rip Saw Multiblade 4.3" max. thickness with 14" dia. fixed blades(s); 3.3" with 12" fixed blade(s); 4" with 14" moveable blades and 2.95" with 12" moveable blades; 13.4" max. working width between outside saws 25.6: max. 0verall width; 5.5" max. distance to fence from inside fixed blade; 0.59" to 13.38" max. saw travel; 23-1/2" min. stock length; 19.7" possible with optional short stock holddodwn (reduces thickness capacity. -- With 70mm dia. x 13-3/4" long saw arbor powered by a 50 HP motor driving the blades at 3,800 RPM; 3 NHP feed motor ;provides feed speeds from 15 to 135 FPM; 1/2 HP lift motor for hold-down roll; infinitely variable saw shifting speeds from .78" to 3.15" per second; (3) 15mw laser lights; (3) 12" or 14" dia. x 90mm bore blades; 72" x 31" tasble size sits 30" from the floor. -- Features include cast iron main frame with main parts enclosed to ensure protection and perfect stability; HD precision straight line caterpillar type feed chain with easily replaceable bolt-in cast steel or Urethane chain ads (optional); fully programmable position sets (10) programs of (10) sets each or infinitely variable foot pedal position set; user friendly Touch Screen control (free standing operators control console) is integrated with 32 bit micro processor and (2) RS232 ports for incredible positioning speeds and EXACT blade positioning. -- Touch Screen with full and easy programming capabilities and joystick control; saw blade positioning is accomplished by industrial series Servo Motor and control; blade speed is infinitely adjustable from .78" to 3.54"/sec. to match all operations; blade positioning can be initiated by electronic joystick control (efficient & quick) or the touch screen controls. -- Equipped to shift (2) saws independently or (2) saws per shifter (optional as a cluster) or with a single or bank of saws with spacers can be set up on the inside of the saw arbor to gang rip if desired. New short sock cutting device included -- Top pressure roll system is electronically positioned from the front control panel for lumber thickness; includes position readout; top roll hold down system is mated to the servo positioning short stock shoe to provide optimum straight line ripping and safety; top rolls are spring tensioned and tension is adjustable (pneumatic pressure is optional). -- Specially designed and Patent Pending Precision Glide Lock with nickel chrome steel saw arbor with super technology for easy maintenance and free saw shifting; (2) shifting saw bushings are equipped with specially designed rollers for most accurate and very fast saw positioning. -- (3) rows of anti-kickback fingers; variable feeding speeds from 16' to 135' FPM inverter motor and speed control with LED readout; electronic overload sensing system is integrated to the inverter feed system providing automatic speed reduction under heavy amperage load; laser light system including (3) 15mw Lasers is fixed to the inside blade as well as
Equipment Location:PACIFIC NORTHWEST, AL
EX-FACTORY INC.
704-841-2001
KENTWOOD R 450X 3M HEAVY DUTY Selective Rip Saw with (3) Shifting Blades INCLUDING the Optimizing Infeed System:Designed for HEAVY production volumes and with moving blade technology. Features include a solid steel metal base and manually adjustable infeed fence; noise reducing lining to lower noise levels approximately 15db. -- Capacities: 1" Min. - 18-1/4” max. rip width cap. x 3/4" min. to 4" max. cutting depth; 18-1/2” wide feed chain with max. pass max. width of 31-1/2". -- Arbor driven by 60 HP motor at 3,500 RPM. With 9-3/4" min. and 15" max. saw blade diameter. -- 3 HP feed motor with feed speeds to 264 FPM; feed chain runs on dual V-guide system providing best board control; with wear resistant chain dip cams and hardened chain pins -- (3) Movable blades, servo driven for fast accurate positioning of the blade; blade sensors to prevent blade crashing; 3/4" min. to 10.3/4" max. distance between fixed and moving blades. -- Fast setup of arbor; easy access with wide open hood and centrally arranged controls; low maintenance closed feed chain; automatic chain lubrication; maintenance-free saw arbor bearings. -- Arbor motion detection to prevent the hood from opening while the blades are moving; (4) sets of anti kickback fingers; motorized pressure plate; (4) pressure rollers -- Operator interface control for quick and easy cutlist setup for up to 99 different cutlists. Moving lasers provide quick reference to the blade's physical position. Optimization of boards with manual override capabilities via joystick control. Moving blade and arbor design along with a motorized pressure plate allow for quick setups.Standard Features include: -- Cutting accuracy of 0.008" over 8' from a steel transport dip chain running on hardened steel guide rails for excellent board control and less friction. -- Digital meter for easy reading of feed operating speed; amp meter for monitoring arbor motor load. -- Inverter driven feed belt with adjustable speed potentiometer for speeds up to 265 FPM. -- Five (5) independent top pressure rolls for cutting accuracy and control. -- Control voltage-ready indicator lamps for both 110VAC and 24VDC; electronic amperage monitoring system with automatic speed reduction to reduce feed speed when required to avoid damage to arbor motor and saw blades. -- Easily accessed V-belt driven saw arbor for reduced vibration and higher tolerances; five sets of anti kick back fingers. -- Aluminum pressure shoe with holding brackets; hand wheel arbor height adjustment with position measuring scale; automatic oil pump with alarm notification relay. -- Motion sensor device and locking safety hood with window along with panel light indication to indicate when it is safe to open the machine hood; limit switch on infeed to stop machine is case of oversized boards. -- Automatic soft start and stop controls; emergency stop buttons on infeed and outfeed of machine; easy access to spindle and blades for maintenance and to
Equipment Location:SOUTH
Jeff Terrill
800-374-5009 ext:349
0.6" TO 63" width x 0.4 to 2" thickness capacity. With 1 HP raise/lower motor, 15 HP feed motor (larger avail.) with speeds from 20 to 200 FPM, 3.15 (80 mm) spindle dia. at 3,200 RPM powered by 75 HP motor. -- High precision spindle assembly with hydro-Loc bearing at outboard end; slides out of machine for quick and accurate saw setting. -- Frame is stress relieved; sound & safety enclosure with internal lighting; infeed table hardened and chremed. -- Variable pressure to top feed rolls; feed roll drive by Cardan shaft drive with heavy duty gearboxes; (8) sets powered top and (6) sets bottom powered and full width rolls powered by heavy duty 15 HP variable frequency drive. Arbor motor with Wye-Delta low amp starters. -- Complete with (8) 6" (150 mm) dust hoods, (4) top and (4) bottom, documention includes maintenance manuals, operator's manual, electrical schematics, and detailed parts list.
Equipment Location:PACIFIC NORTHWEST, AL
EX-FACTORY INC.
704-841-2001
LAUDERDALE-HAMILITON 72" RFPS Panel Gang Rip Saw; Roll Feed --This machine will cut a bundle (42 sheets) of 4' x 8' x 3/4" plywood or OSB into narrow strips in (4) Min or less. -- 40 HP main arbor motor; 1/8" min. - 1-1/4" max. material thickness; 10" dia blade; 3-15/16" dia. arbor with 72" of usable width cutting capacity, min. panel length 30"; 1-15/16" FAFNIR arbor bearings; positive powered steel contact feed rollers; fixed feed speed of 80 FPM. -- Blades & collars: Thin kerf 10" dia x 40-tooth x 4-3/16" bore non-split blades (blades not included) with quick & easy setup for fast blade positioning/removal. Blades & collars are sold separately & not included in the machine price; 10" dia. x 40-tooth thin kerf blades, please add ...$ 100 ea.; 1-1/4" wide x 4-3/16" bore blade collars, add ...$ 120 each. -- Complete with:(2) 4" dia dust collection ports on top and (1) 8" dust collection port on bottom. Total recommended 2,200 CFM.Available Options at additional cost: -- Assortment of blade thicknesses & diameters -- 110 V Infeed Scissor Lift with foot pedal controls or automatic up-indexing -- 110 V Outfeed Scissor Lift with automatic down-indexing; -- Split blade & collar system -- Main motor power from 30 - 75 HP.Depending on application: -- 4" Max. cutting height (requires 75 HP motor) -- Variable speed feed -- Non-marking Polyurethane contact feed rollers -- Additional arbors -- "QUICK CHANGE" arbor system (see video). -- "Pigtail" quick change Crosscut Saw System. -- Actual Model is LHI RFPS-72/10 Roll Feed Panel Saw. NOTE: 100" Width capacity machines available - call or email for details.
Equipment Location:SOUTH, AL
EX-FACTORY INC.
704-841-2001
LAUDERDALE-HAMILTON 102" RFPR Panel Gang Rip Saw; Roll Feed.40 HP main arbor motor; 1/8" min. - 4-1/4" max. material thickness; 10" dia blade design; 3-15/16" dia. arbor with 102" of usable width cutting capacity, min. panel length 30"; 1-15/16" FAFNIR arbor bearings; with (8) polyurethane feed rollers or Albion rubber coated wheels on 6" centers; fixed feed speed of 80 FPM (other speeds on request). -- This machine will cut a bundle (42 sheets) of 4' x 8' x 3/4" plywood or OSB into narrow strips in (4) Min or less. -- INCLUDES (6) arbor collars - blades not included. -- Machine is complete with: (2) 4" dia dust collection ports on top and (1) 8" dust collection port on bottom. Total recommended 2,200 CFM. -- Blades & Collars: 10" dia. x 40-tooth thin kerf blades, add ...$ 100 each; 1-1/4" wide x 4-3/16" bore blade collars, add ...$ 120 each. -- Drag Chain Feeder Conveyor - Roller conveyor transfers sheets to infeed of saw and dog chains align and start the sheets into the saw feed rolls. Recommended with 102" wide machines, add $18,800 -- Actual Model is LHI RFPS-102/10 Roll Feed Panel Saw.
Equipment Location:SOUTH, AL
EX-FACTORY INC.
704-841-2001
LAUDERDALE-HAMILTON "RFPR" ROLL FEED PANEL RIPPER WITH: 72" width cap; 1/8" min to 1-1/4" max. thickness capacity Multi-Blade Panel Ripsaw. -- 30 HP arbor motor and including the following equipment: -- (8) Feed rolls, all powered; (4) infeed rolls and (4) outfeed rolls; (2) top and (2) bottom at the infeed and outfeed, all polyurethane covered (feed rollers set up for thin strip and full panel feeding). -- Saw blade arbor is 3-15/16" dia. with 72" of useable space for idle blade and collar assemblies. -- Arranged for 10" diameter blades, not included; -- Variable speed drive to all rollers 16 to 80 FPM with inverter drive and (4) preset speed via selector switch. All (8) feed rolls are driven. -- Includes: Throat frame plate with (6) aluminum throat plates (for filler plates between blades).Includes: -- (6) Blade collars, 2" wide -- (1) Quick change arbor cart without blade box. -- (1) Quick change set up kit including belt guide, belt tensioner, and hydraulic arbor lock
Equipment Location:SOUTH, AL
EX-FACTORY INC.
704-841-2001
MEREEN JOHNSON "312-DC" with Rip Navigator; 12" Arbor cap., 14" max. dia. tooling, 3-1/2" max. thickness, 30" min. length for glue joint accuracy & 22" min. for busting only; 6" throat. -- Equipped with: 50 HP - 3,600 RPM TEFC Direct drive motor, arbor with disc brake & load meter, arbor lockout on access door. -- One (1) movable blade in association with the "Rip Navigator Optimizing" system. -- Feed & chain: 3 HP Variable feed speed from 30 - 150 FPM with adjustable jam protection, M-J "Posi-Feed" dip bed carried on 5" pitch hardened double-V chain, "Quad Life" hardened dip cams, extruded structural aluminum feed bed slats with replaceable steel backed rubber insert strips, automatic chain oiler with low level shutoff. (4) movable laser lights on this moving blade saw. -- Complete with: (4) 3" dia. air loaded overhead pressure rolls; full width segmented maple, spring loaded overhead pressure shoe, pressure rolls & pressure shoe unit adjust with scale & pointer thickness reference; anti-kickback fingers. -- INCLUDES: Automatic feed table to automatically feed boards into the Saw. -- NOTE: Seller states: "Feed chain was rebuilt last year and we have the invoices for the parts. We did not use the rip saw for more than a day or two all of last year. The feed chain is still new." And: "This is an excellent rip saw. We used the laser lines to direct the rips manually because the computer needs tweaking."
Equipment Location:MIDWEST
Jeff Terrill
800-374-5009 ext:349
MEREEN-JOHNSON - "312-DC", ...Dip Chain Gang Ripsaw.12" Cap. arbor & 6" throat; thickness 1/8" - 3-1/2" using 12" or 14" dia. tooling; 2-3/16" dia. arbor; min. length 22".Specifications & Features: -- Arbor Drive: 50 HP - 3,600 RPM TEFC Direct drive motor, electrical lockout on access door, arbor hand brake, and motor load meter. -- Feed Drive: 3 HP Feed motor, 30 - 150 FPM feed speed, shear pin drive pully. -- Feed Bed: 5" Pitch double-V chains with extruded aluminum slats & replaceable steel backed rubber inserts, and automatic oil mist lubrication system. -- Holddowns & Bed Plate: (4) 3" Dia. air loaded overhead idle press rolls, (1) full width overhead spring loaded bed plate, thickness adjustment with scale & pointer.Complete with & Includes: -- (1) 8" & (1) 5" dia. upper and (1) 5" dia. lower dust outlets require 3,150 CFM total. -- Sound enclosures, (1) saw sleeve and spacer set.
Equipment Location:NORTHEAST
Jeff Terrill
800-374-5009 ext:349
MEREEN-JOHNSON MODEL 424 DIPCHAIN GANG RIPSAW -- 24" Arbor width cap., 14" max. dia. tooling, 3-1/2" max. motorized thickness adjustment, 29" min. length for glue joint accuracy and 22" min. for busting only, 6" throat. -- Equipped with: 75 HP - 3,600 RPM TEFC direct drive motor, arbor with disc brake & load meter, arbor lockout on access door. -- Feed & chain: 5 HP Variable feed speed 30 - 170 FPM with adjustable jam protection, M-J "Posi-Feed" dip bed carried on 5" pitch hardened double-V chain, "Quad Life" hardened dip cams, extruded structural aluminum feed bed slats with replaceable steel backed rubber insert strips, automatic chain oiler with low level shutoff. -- Complete with: (4) 3" dia. air loaded overhead pressure rolls; full width spring loaded overhead bed plate, pressure rolls & bed plate unit with powered adjustment; with scale & pointer for thickness reference; anti-kickback finger system with (1) lower & (2) upper on infeed, (1) upper assembly on outfeed. -- Includes (1) Saw Sleeve and spacer set.
Equipment Location:MIDWEST
Jeff Terrill
800-374-5009 ext:349
2004 Cameron Auto Opti-Rip Infeed Model: 34F-M1 Serial: OR164 100% Servo (only Servo is this Cameron) Full amp load 81 44" W bed Up to 20 saws can be run on the arbor No moving blades BUT there are moving lasers Although this one has been pulled from service, they have an identical one still running and available for inspection.... The seller has confirmed that this Mereen Johnson 441 Rip saw is in great working/running cnodition and it is ready to load!
Equipment Location:WI
Carolina Machinery Sales, Inc
704-288-1904
Mereen Johnson Gangrip Saw Product No. 4451 Mereen Johnson Gangrip Saw Model 441 50 HP Includes complete electrical setup Ran and operated well when removed from service price: Call For Pricing Machine Type: Rip Saw / Gangrip Manufacturer: Mereen Johnson Model: 441 Year: Machine Location: None
Equipment Location:Great Lakes
Mike Stuck
828-773-2204