• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
41 Results Found for Gang Rip Saw Viewing 1 - 20 of 41 results
RECENTLY ADDED
STANDARD LISTINGS
Brewer Gang Rip Model # 8124 Serial # 051689 220/440 Vac 2) 125 HP Double Arbor 1) 50 HP Planer Head 1) 10 HP Hydraulic Power Pack Powered Infeed rolls
Equipment Location:Buffalo, NY
Sawmill Exchange
713-729-6455
Brewer Double Arbor Single Bay Gang Saw Model BR-812 75 HP arbor motor 30 HP planer head 13" blades cut up to 3 5/8" All associated electrical included S/N 61811
Equipment Location:Blowing Rock, NC
Carolina Used Machinery
828-773-2204
Complete Rough Mill consisting of the following machinery and handling equipment: -- Infeed Rollcase Conveyor with rolls spaced for forklift; 56' long X 51" wide with 6" dia. rolls. -- Scissors Lift for positioning lumber to feed Gang Ripsaw. -- (8) Laser Lights with stands. -- MEREEN JOHNSON "424" Rip Saw, new in 1996, with the following specifications and features: 24" Arbor cap., 14" max. dia. tooling, 3-1/2" max., 22" min. length, 6" throat. -- Equipped with: 75 HP - 3,600 RPM TEFC Direct drive motor, arbor with disc brake. -- Feed & chain: 3 HP Variable feed speed from 50 to 150 FPM, M-J "Posi-Feed" dip bed carried on 5" pitch hardened double-V chain, "Quad Life" hardened dip cams, extruded structural aluminum feed bed slats with replaceable steel backed rubber insert strips, automatic chain oiler with low level shutoff. -- Complete with: (4) 3" Dia. air loaded overhead pressure rolls; full width spring loaded overhead bed plate, height adjustment with scale & pointer reference; anti-kickback finger system with (1) lower & (2) upper on infeed. -- Includes: Saw sleeve and spacers to fill the sleeve, factory setup stand. (2) Dust hoods, (1) 8" dia. & (1) lower 4" dia. hood, requires 3,820 CFM dust collection. -- Outfeed Conveyor from Mereen-Johnson Multiple Ripsaw; 18' long x 25" wide. -- Roof Top Conveyor to move ripped lumber to Cutoff Saws; 60' long x 13.5' wide; conveyor separates in the middle for easy dismantling. Has (3) lumber stops to hold lumber at Cutoff Saws. -- BARR MULLIN "Brute" Optimizing Cutoff optimizing saw, built new 1996 and recently rebuilt by Barr Mullin and with the following specifications and features: 2" x 8" Width cap. 30" min. length cap., no max. limit (slower feed speeds recommended with longer lengths), up cut design with WINDOWS "NT" based control; with 7.5 HP - 4,660 RPM Motor, 20" blade cap., 1" dia. arbor. -- Roller infeed with upper spring loaded press rolls, (12) lower driven chromed & knurled outfeed rolls, high torque/high inertia AC Servo drive, variable feed speed 0 - 1,000 FPM (accuracy at full speed +/- 1/32", +/- 1/64" at lower speeds); (1) 6" dia. dust chute. Features: Repeatable length cutting, automatic processing of random clears, also tallies total linear footage in inches or metric. -- WINDOWS "NT" based control for easy networking and compatability with business software. -- Includes 2-man Marking Station and Sorter Kick Off Conveyor with (5) kick stations and rack to collect defect lumber. -- (3) WHIRLWIND model "1000" 2" x 8" cap. Chopsaws with infeed tables. -- Conveyor for cutstock from Whirlwind Saws; 15't long x 5' wide. -- Conveyor to move stock to round table; 12" wide. -- Round Table for sorting cutstock with an 8' diameter. -- Scrap conveyors to move scrap from Barr Mullin and (3) Whirlwind Chopsaws to hog. -- MELLOT Guillotine with vibrating conveyor; chops ripsaw edgings into short pieces. -- NOTE: Waste Grinder available at extra cost. - Call Jeff Terrill @ e
Equipment Location:SOUTHEAST
Jeff Terrill
800-374-5009 ext:349

Cornell Gang Rip Saw

Call for Price
Cant deck Unscrambler Infeed Deck Cornell Double Arbor Gang Rip Outfeed Rolls Pendu Stacker
Equipment Location:Monroe, MO
Carolina Machinery Sales, Inc
704-288-1904

Danckaert Gang Rip Saw

Call for Price
This unit has been in storage for some time and will need some TLC.
Equipment Location:NY
Carolina Machinery Sales, Inc
704-288-1904
KENTWOOD R 450X 3M HEAVY DUTY Selective Rip Saw with (3) Shifting Blades INCLUDING the Optimizing Infeed System:Designed for HEAVY production volumes and with moving blade technology. Features include a solid steel metal base and manually adjustable infeed fence; noise reducing lining to lower noise levels approximately 15db. -- Capacities: 1" Min. - 18-1/4” max. rip width cap. x 3/4" min. to 4" max. cutting depth; 18-1/2” wide feed chain with max. pass max. width of 31-1/2". -- Arbor driven by 60 HP motor at 3,500 RPM. With 9-3/4" min. and 15" max. saw blade diameter. -- 3 HP feed motor with feed speeds to 264 FPM; feed chain runs on dual V-guide system providing best board control; with wear resistant chain dip cams and hardened chain pins -- (3) Movable blades, servo driven for fast accurate positioning of the blade; blade sensors to prevent blade crashing; 3/4" min. to 10.3/4" max. distance between fixed and moving blades. -- Fast setup of arbor; easy access with wide open hood and centrally arranged controls; low maintenance closed feed chain; automatic chain lubrication; maintenance-free saw arbor bearings. -- Arbor motion detection to prevent the hood from opening while the blades are moving; (4) sets of anti kickback fingers; motorized pressure plate; (4) pressure rollers -- Operator interface control for quick and easy cutlist setup for up to 99 different cutlists. Moving lasers provide quick reference to the blade's physical position. Optimization of boards with manual override capabilities via joystick control. Moving blade and arbor design along with a motorized pressure plate allow for quick setups.Standard Features include: -- Cutting accuracy of 0.008" over 8' from a steel transport dip chain running on hardened steel guide rails for excellent board control and less friction. -- Digital meter for easy reading of feed operating speed; amp meter for monitoring arbor motor load. -- Inverter driven feed belt with adjustable speed potentiometer for speeds up to 265 FPM. -- Five (5) independent top pressure rolls for cutting accuracy and control. -- Control voltage-ready indicator lamps for both 110VAC and 24VDC; electronic amperage monitoring system with automatic speed reduction to reduce feed speed when required to avoid damage to arbor motor and saw blades. -- Easily accessed V-belt driven saw arbor for reduced vibration and higher tolerances; five sets of anti kick back fingers. -- Aluminum pressure shoe with holding brackets; hand wheel arbor height adjustment with position measuring scale; automatic oil pump with alarm notification relay. -- Motion sensor device and locking safety hood with window along with panel light indication to indicate when it is safe to open the machine hood; limit switch on infeed to stop machine is case of oversized boards. -- Automatic soft start and stop controls; emergency stop buttons on infeed and outfeed of machine; easy access to spindle and blades for maintenance and to
Equipment Location:SOUTH
Jeff Terrill
800-374-5009 ext:349
MEREEN JOHNSON "312-DC" with Rip Navigator; 12" Arbor cap., 14" max. dia. tooling, 3-1/2" max. thickness, 30" min. length for glue joint accuracy & 22" min. for busting only; 6" throat. -- Equipped with: 50 HP - 3,600 RPM TEFC Direct drive motor, arbor with disc brake & load meter, arbor lockout on access door. -- One (1) movable blade in association with the "Rip Navigator Optimizing" system. -- Feed & chain: 3 HP Variable feed speed from 30 - 150 FPM with adjustable jam protection, M-J "Posi-Feed" dip bed carried on 5" pitch hardened double-V chain, "Quad Life" hardened dip cams, extruded structural aluminum feed bed slats with replaceable steel backed rubber insert strips, automatic chain oiler with low level shutoff. (4) movable laser lights on this moving blade saw. -- Complete with: (4) 3" dia. air loaded overhead pressure rolls; full width segmented maple, spring loaded overhead pressure shoe, pressure rolls & pressure shoe unit adjust with scale & pointer thickness reference; anti-kickback fingers. -- NOTE: Seller states: "Feed chain was rebuilt last year and we have the invoices for the parts. We did not use the rip saw for more than a day or two all of last year. The feed chain is still new." And: "This is an excellent rip saw. We used the laser lines to direct the rips manually because the computer needs tweaking."
Equipment Location:MIDWEST
Jeff Terrill
800-374-5009 ext:349
MEREEN-JOHNSON - "312-DC", ...Dip Chain Gang Ripsaw.12" Cap. arbor & 6" throat; thickness 1/8" - 3-1/2" using 12" or 14" dia. tooling; 2-3/16" dia. arbor; min. length 22".Specifications & Features: -- Arbor Drive: 50 HP - 3,600 RPM TEFC Direct drive motor, electrical lockout on access door, arbor hand brake, and motor load meter. -- Feed Drive: 3 HP Feed motor, 30 - 150 FPM feed speed, shear pin drive pully. -- Feed Bed: 5" Pitch double-V chains with extruded aluminum slats & replaceable steel backed rubber inserts, and automatic oil mist lubrication system. -- Holddowns & Bed Plate: (4) 3" Dia. air loaded overhead idle press rolls, (1) full width overhead spring loaded bed plate, thickness adjustment with scale & pointer.Complete with & Includes: -- (1) 8" & (1) 5" dia. upper and (1) 5" dia. lower dust outlets require 3,150 CFM total. -- Sound enclosures, (1) saw sleeve and spacer set.
Equipment Location:NORTHEAST
Jeff Terrill
800-374-5009 ext:349
MEREEN JOHNSON 312-DC-SR-1L GANG RIP SAW W/ (1) MOVABLE BLADE. -- (1) independently adjustable select saw assembly with traveling shoe hold-down, powered horizontal adjustment at nominal 4" per second. 1" min. distance between adjustable saw and outboard fixed saw. Accepts 12" or 14" diameter face mounted saw blades. -- Capacities: 12" arbor capacity, 3" thickness capacity w/14" diameter saw blade; 22" minimum part length. -- Main Motor: 50 HP, 3600 RPM direct drive motor; 3 HP feed motor; 30-150 ft. per minute feed rate. 12" x 2-9/16" diameter arbor with 1/2" x 1/8" double key. -- Includes Laser Guideline Lights; color touchscreen interface mounted in freestanding control pedestal; pressure head includes (4) 3" diameter air loaded overhead idle press rolls, (2) spring loaded traveling shoe hold-downs. 1-1/8" minimum between cam-lock mounted saw blades using moving shoe hold-downs; anti-kickback fingers.
Equipment Location:MIDWEST
Jeff Terrill
800-374-5009 ext:349
24" Arbor capacity, 75 HP main motor, dip chain feed 1/8" to 3-1/2" thickness capacity, 10" to 14" blade capacity, 22" minimum stock length, 5 HP variable feed speed from 20 to 150 FPM, spring loaded holddown rolls, 2-3/16" diameter arbor. Includes (1) saw sleeve.
Equipment Location:WEST COAST
Jeff Terrill
800-374-5009 ext:349
MEREEN JOHNSON 424 GANG RIP SAW -- 24" Arbor cap., 14" max. dia. tooling, 3-1/2" max., 22" min. length, 6" throat. -- Equipped with: 75 HP - 3,600 RPM TEFC Direct drive motor, arbor with disc brake. -- Feed & chain: 3 HP Variable feed speed from 50 to 150 FPM, M-J "Posi-Feed" dip bed carried on 5" pitch hardened double-V chain, "Quad Life" hardened dip cams, extruded structural aluminum feed bed slats with replaceable steel backed rubber insert strips, automatic chain oiler with low level shutoff. -- Complete with: (4) 3" Dia. air loaded overhead pressure rolls; full width spring loaded overhead bed plate, height adjustment with scale & pointer reference; anti-kickback finger system with (1) lower & (2) upper on infeed. -- Complete with (2) Upper dust hoods, (1) 10" & (1) 5" dia. & (1) lower 4" dia. hood, requires 3,820 CFM -- Includes: Some blades, used spacers and sleeve. -- SEE VIDEO
Equipment Location:WEST COAST
Jeff Terrill
800-374-5009 ext:349
MEREEN-JOHNSON MODEL 424 DIPCHAIN GANG RIPSAW -- 24" Arbor width cap., 14" max. dia. tooling, 3-1/2" max. motorized thickness adjustment, 29" min. length for glue joint accuracy and 22" min. for busting only, 6" throat. -- Equipped with: 75 HP - 3,600 RPM TEFC direct drive motor, arbor with disc brake & load meter, arbor lockout on access door. -- Feed & chain: 5 HP Variable feed speed 30 - 170 FPM with adjustable jam protection, M-J "Posi-Feed" dip bed carried on 5" pitch hardened double-V chain, "Quad Life" hardened dip cams, extruded structural aluminum feed bed slats with replaceable steel backed rubber insert strips, automatic chain oiler with low level shutoff. -- Complete with: (4) 3" dia. air loaded overhead pressure rolls; full width spring loaded overhead bed plate, pressure rolls & bed plate unit with powered adjustment; with scale & pointer for thickness reference; anti-kickback finger system with (1) lower & (2) upper on infeed, (1) upper assembly on outfeed. -- Includes (1) Saw Sleeve and spacer set
Equipment Location:MIDWEST
Jeff Terrill
800-374-5009 ext:349
MEREEN-JOHNSON MODEL 424 DIPCHAIN GANG RIPSAW -- 24" Arbor width cap., 14" max. dia. tooling, 3-1/2" max. motorized thickness adjustment, 29" min. length for glue joint accuracy and 22" min. for busting only, 6" throat. -- Equipped with: 75 HP - 3,600 RPM TEFC direct drive motor, arbor with disc brake & load meter, arbor lockout on access door. -- Feed & chain: 5 HP Variable feed speed 30 - 170 FPM with adjustable jam protection, M-J "Posi-Feed" dip bed carried on 5" pitch hardened double-V chain, "Quad Life" hardened dip cams, extruded structural aluminum feed bed slats with replaceable steel backed rubber insert strips, automatic chain oiler with low level shutoff. -- Complete with: (4) 3" dia. air loaded overhead pressure rolls; full width spring loaded overhead bed plate, pressure rolls & bed plate unit with powered adjustment; with scale & pointer for thickness reference; anti-kickback finger system with (1) lower & (2) upper on infeed, (1) upper assembly on outfeed. -- Includes (1) Saw Sleeve and spacer set
Equipment Location:SOUTHEAST
Jeff Terrill
800-374-5009 ext:349
Model: Mereen Johnson 424-DC/BD-1 24" Arbor 14" Max Tooling 3-1/2" Thickness Capacity 75 HP motor Variable Speed: 30 - 90 FPM This unit was removed from production at the current facility. Ready to load!
Equipment Location:TN
Carolina Machinery Sales, Inc
704-288-1904
SCMI M3 Dip Chain Gang Rip Saw -- 11-7/8" x 4-3/4" Working capacity. -- Motor: 42 HP - 4,200 RPM motor, 70 mm dia. sleeve for 12" - 14" dia. saw blades, 4-3/4" max. depth of cut, 8-3/4" throat depth, 14" min. stock length. -- Equipped with: 2 HP Feed motor, variable feed drive, feed speed from 20 - 150 FPM, automatic chain lubrication, 60" x 30" table; (2) upper infeed & (2) upper outfeed rollers at 4" in dia., top & bottom anti-kickback fingers, main dust hood with 8" dia. outlet, long adjustable infeed fence. -- Includes: Motor load meter and (2) saw sleeves
Equipment Location:NORTHEAST
Jeff Terrill
800-374-5009 ext:349
STETSON-ROSS GANG RIP WITH 4 BLADES
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
TOS SVITAVY PKSN 20A Dip Chain Gang Ripsaw with Overhead Arbor: 7.8" Max. rip cap. (between saw blades), 9.5" chain width, 21.6" min, board length (unbutted), 9.8" (butted). -- 6.3" Min. to 13.77" max. blade dia., 4 mm (0.15") min. to 100 mm (4") max. depth of cut. -- 2 HP Variable speed feed works from 4 to 40 MPM (13 to 131 FPM); 3/4 HP raise and lower to the feed rolls; 3/4 HP motor raise and lower to the saw arbor raise and lower. -- 30 HP Motor; 60 mm dia. arbor @ 4,300 and 5,500 RPM, changeable. -- Includes: Automatic chain oiler, top & bottom anti-kickback fingers, adjustable Infeed fence, saw sleeve and spacers. NOTE: Machine has been in a warm, dry storage since new. Never run even a single board! This machine couldn't be any newer unless it was built at a later date
Equipment Location:MTN/CENTRAL CDN
Jeff Terrill
800-374-5009 ext:349
Tri State Machinery Multi Rip Saw
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
MEREEN-JOHNSON MODEL #424-DDC/SR-2+GANG MULTIPLE RIP SAW WITH UPDATED (2015) LINEAR ENCODER AND DRIVE SYSTEM AND BRAND NEW 2017 RIP NAVIGATOR SCOUT!!! With the following specifications and features:DOUBLE ARBOR MACHINE:infeed arbor with (1) LH and (1) RH select saws with new style rack and pinion adjust to edge trim/hog; outfeed arbor with 24” gang sleeve to multiple gang rip lumber. Machine feed chain arranged to dip at each saw line. New style 5” dia. high yield rolls. CUTTING CAPACITYFirst arbor: 2 “ thickness with 14 “ diameter saw blades, 3 “ thickness with 16 “ dia. saws, 3-1/2” thickness using 17 “ dia. saws; second arbor: 2-1/2 “ thickness with 12 “ dia. saws, 3-1/2” thickness with 14" dia. saws, 48 “ min. length. With 6 “ throat. ANTI-KICKBACK ASSEMBLIES:SĀ²ingle bottom and double upper infeed; and single upper outfeed. INEEED ARBOR - SELECT SAWS(1) inboard and (1) outboard select saw assembly, powered horizontal adjustment at 20" per second (peak) by DC servo motor with 50:1 ratio gearbox and rack & pinion adjust. 3" dia. double keyed arbor; each select saw with easily replaceable double keys. Oil mist lube to select saw bearings. Arranged for 14" min. to 17" max. dia. x 3/4" kerf trim/hoggers with six (6) bolt camping collar mount. Arrange for integration to Rip Optimizing System. Program jog for powered position of each select unit for set up; ratchet/adaptor for manual adjust. Extend overbeam LH side for tool changeover. Minimum distance between saws 3" with face to face configuration. Maximum distance between select saws approx. 24". No laser lights included. No sleeve mount capability on first arbor.FIRST ARBOR:75 HP 3600 RPM TEFC M-J direct arbor drive, arbor lockout on access door, slip-off outboard bearing with fork type arbor lock. 3" dia. arbor with double keyway. No disc type brake. Arbor powered vertical adjustment, up/down pushbutiftons LH infeed. With arbor ammeter.SECOND ARBOR:75 HP 3600 RPM TEFC M-J direct arbor drive, arbor lockout on access door, slip off end bearing mtll fork type arbor lock. 2-3/16" dia. arbor, center relieved. Disc type brake. Arranged for mounting standard 24" capacity sleeve. Arbor power vertical adjustment, up/down pushbuttons LH outfeed. Arbor ammeter.SAW SLEEVE:(1) 24" capacity sleeve for second arbor, 3-1/8" O.D. Sleeve with standard mount to second arbor.STANDARD ARRANGEMENT:One arbor sleeve pilot and one bench mounting (vertical) stub included. SAW SPACERS:Includes a random assortment of saw spacers saw spacers, most of which are with 4-15/16" O.D. x 3-1/8" I.D. HOLD DOWNS AND BED PLATE:Infeed pressure head: 5" air loaded overhead press rolls, (2) rolls infeed and (1) roll outfeed, all smooth steel; individual air loaded bed plate type aluminum hold downs, one set for 2" thickness using 14" dia. saws.Outfeed pressure head: High yield (5/8" yield on 3" thickness) pressure head with (4) 5" diameter air loa
Equipment Location:MIDWEST
Jeff Terrill
800-374-5009 ext:349
31" Arbor cap., 14" max. dia. tooling, 3-1/2" max. motorized thickness adjustment, 29" min. length for glue joint accuracy and 22" min. for busting only, 6" throat. -- Equipped with: 75 HP - 3,600 RPM TEFC direct drive motor, arbor with disc brake & load meter, arbor lockout on access door. -- Feed & chain: AC Inverter controlled feed drive with feed speeds from 30 to 150 FPM with adjustable jam protection, M-J "Posi-Feed" dip bed carried on 5" pitch hardened double-V chain, "Quad Life" hardened dip cams, extruded structural aluminum feed bed slats with replaceable steel backed rubber insert strips, automatic chain oiler with low level shutoff. -- Complete with: (4) 5" dia. air loaded overhead pressure rolls; full width spring loaded overhead bed plate, pressure rolls & bed plate unit with powered adjustment; with scale & pointer for thickness reference; anti-kickback finger system with (1) lower & (2) upper on infeed, (1) upper assembly on outfeed. -- Also included is (1) saw sleeve and an assortment of blades & spacers; wrenchs & arbor nuts.
Equipment Location:MID ATLANTIC
Jeff Terrill
800-374-5009 ext:349