• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
11 Results Found for Jointer and Finger Jointer Viewing 1 - 11 of 11 results
STANDARD LISTINGS
AUBURN END PRESS: Designed for continuous gluing, pneumatically operated, 10' max. layup area between the holddown shoe and pressing cylinder. -- For continuous gluing, the 3' pressed-up section is advanced to the holddown shoe and the layup area is re-filled. Shorter lengths can be assembled with the use of "filler blocks". -- 8" Max. width x 2" max. thickness, 6" dia. x 4" stroke pressing cylinder, 2,825 Lbs pressure @ 100 PSI, air operated overhead holddown bar for layup area with front guard, adjustable cycle time, average cycle time approx. (7) Sec.
Equipment Location:PACIFIC NORTHWEST
Jeff Terrill
800-374-5009 ext:349
CADORET MANUAL FINGER JOINT SYSTEM: -- Shaper Sections includes right and left hand Shaper Units, each with AC variable speed drives from 30 to 60 FPM. Shapers with hand-wheels and digital readout scales; on on the horizontal saw adjustment and one each on vertical and horizontal spindle adjustments, Retractable guide knives for running flooring; quick change chain lug back up blocks for end matching; extended arm for running up to 16' long material; roller track for material longer than 48". -- APQUIP Glue Applicator on second Shaper. -- 20' Manual Press Section with 5/8" to 3" thickness cap; 3/4" to 8" width cap.; 36" to 240" assembled length capacity. With hydraulic driven rubber rolls and adjustable length stops. -- High efficiency motors used throughout.
Equipment Location:MIDWEST
Jeff Terrill
800-374-5009 ext:349
CANTEK FL-08 Automatic Vertical Finger Joint Line - with the Following: -- MODEL F-I29-T2 AUTOMATIC INFEED TABLE -- Table Size is 35” long x 23” wide and equipped with 1/2 HP motors MODEL F-C07 AUTO FINGER JOINT SHAPER, LEFT and RIGHT SIDES: -- Incoming Block Capacity: -- Block Lengths from 5.9” to 35.4” -- Block Widths with Vertical Jointing from 0.78” to 2.36”; -- Block Width with Horizontal Joint up to 6” (wider possible – optional) -- Thickness, Vertical Jointing from 0.78” to 6.3” -- Thickness Horizontal Jointing from 0.78” to 2.36”.Specifications: -- 20 HP Motor for Shaper Spindle -- 5 HP Motor for Trim Saw -- 2 HP Motor for Bottom Scoring Saw -- 1/2 HP for Feed Conveyor with Variable Speed Frequency Drive -- Cycle Speed of max. 3~4 Cycles/Min -- NOTE: Right side shaper equipped with roller type glue applicator. MODEL F-D16 TRANSFER ROLLER (From RH Shaper to Assembly Machine) -- Table Size: 23.6" wide x 35.4” longF-A05-6 TWO-STAGE AUTO FINGER ASSEMBLER -- Output Length: Up To 236” - 19.68’ -- Width from 0.78” to 6.3” -- Thickness from 0.78” to 2.36” -- 2 HP Drive for Feed Table -- 5 HP Motor for Cut Off Saw -- 5 HP Motor Hydraulic Pump -- Speed of approx. 4 to 5 Finished boards/Min. All Electrics are to UL/CSA Standards with Wye Delta – Includes Soft StarterINCLUDES: Extra belts, blocks, cutter heads and some knives NOTE: This system performs best when incoming blocks are run thru a 4-sided Planer or MoulderPRODUCTION EXAMPLE RUNNING 2" X 6' BLOCKS: -- 1-1/2" x 5-1/2" blocks, 23.6" table = (15) blocks per cycle. -- (3) table cycles per minute x 15 Blocks = (45) blocks per minute -- (4) table cycles per minute x 15 Blocks = (60) blocks per minute. -- Average Block Length of 24" = 90 to 120 LINEAL FPM
Equipment Location:WEST COAST
Jeff Terrill
800-374-5009 ext:349
Single head shaper, 9 HP cutterhead, 2 HP trim saw, 1-1/4" cutterhead spindle, 4000/6000/8000/10,000 RPM spindle speed, 8" saw diameter, 5" diameter dust hood, 2" X 8" maximum workpiece, 6" minimum work lengths, unlimited maximum length. Complete with: glue spreader with heavy duty gearhead motor drive, stainless steel glue pan, aluminum discs, scraper fingers (all mounted on floor stand). Assembly press is fully adjustable for 3' to 8' lengths, single hand operated control to activate side & end clamps (10" stroke). Includes: magnetic starter.
Equipment Location:PACIFIC NORTHWEST
Jeff Terrill
800-374-5009 ext:349
Model "3470" with: Right & left shaper sections. - Cap.: 5/8" - 2" Max. thickness, 2" - 8" max. width (with lugs on 12" centers, cureently arranged for 6" max. width with lugs on 9" centers), 8" min. - 96" max. length. NOTE: MJachine has been modified for 60" max. length, can be converted back to the original 96" infeed lengths. -- Equipped with: (2) 3 HP score saws, (2) 5 HP trim saws, (2) 20 HP shaper motors. -- Variable feed lug chain drive with: variable speed control, air bag pressure head with "quick change" feature and side conveyors; APQUIP extrusion type glue applicator with block counter & 1.5-gal pot; manual transfer to the Assembly Press. -- Model "3550" Assembly Press: 30' Max. cutoff/press cap., automatic cycling, feed speed varies automatically depending on part & cutoff lengths from 50 - 200 FPM; powered infeed flat top chain 6" wide x 15' long with side alignment rolls to the retard section. -- Pieces advance through the cutoff saw to a moveable limit switch & are cut-to-length; bottom mounted 5 HP flying cutoff saw for continuous non-stop assembly. -- The cut-to-length piece drops down into a final 30' squeeze chamber while the next piece is cut-to-length; finished lengths are pushed out by the next piece onto material outfeed arms. -- Complete with: (4) Re-trim saw for shorter length cut while Press is used for full length capacity and one complete set of tooling. -- NOTE: Price includes a used 1995 Western model 875 automatic cutterhead grinder for sharpening fingerjoint heads, mill to pattern, "L" shaped and face type grinding. Cutter cap. face grinding up to 12" long x 14-5/8" dia; bevel grind up to 6" long x 14-5/8" diameter. Grinding motor 1.5 HP with grinding speed between 1,725 and 3,450 RPM. The grinding wheel automatically infeeds the amount that the operator designates in the program. Panelview operators station control with AB "504" processor. Lineal bearing carriage for 14" automatic table traverse. Variable wheel speed in both directions. (Priced on our website as [GS-011279] for $17,850.)
Equipment Location:NORTHWEST
Jeff Terrill
800-374-5009 ext:349
INDUSTRIAL IWS 10 Finger Jointer:Shaper unit will handle material 2" to 8" wide, 5/8" to 2" thick and 5" minimum length.Equipped with: -- ( 2) Trim saws with 5 HP motors, (2) Scoring saws with 3 HP motors and (2) Shaper spindles with 15 HP motors - 1-13/16" dia.. -- Feed speeds from 0 to 150 FPM. Average speed of (100) lugs per minute; feed chain is equipped with lugs on 9" spacing. -- New design "APQUIP" dual glue applicator with improved glue spreading and simplified pump. -- Model 3502 90° brush transfer to the assembly and Flying Cut Off Saw. -- MOD "3550 HAL" - Assembly Press, 16' long, with (1) retrim saw, air over hydraulic clamp & squeezing including Flying Cut Off Saw with 7.5 HP saw motor.Complete with: (3) Infeed block bins with "waterfall" belt conveyors to bring organized blocks to the infeed operator and on to the brush feeder.
Equipment Location:EASTERN CDN
Jeff Terrill
800-374-5009 ext:349
INDUSTRIAL IWS Shaper and 3550 HAL Assembly Press. -- MOD "IWS" - Shaper unit, will handle material 2" to 8" wide, 5/8" to 2" thick and 5" minimum length. -- Equipped with: (2) Shaper spindles - 1-13/16" dia. and 15 HP motor each), feed speed 0 to 150 FPM. Average speed of (100) lugs per minute; feed chain is equipped with lugs on 9" spacing. -- New design "APQUIP" dual glue roll applicator with improved glue spreading and simplified pump; 90° transfer to the assembly and Flying Cut Off Saw. -- Overhauled/Repainted MOD "3550 HAL" - Assembly Press, 16' long, air over hydraulic clamp & squeezing section to Flying Cut Off Saw with 5 HP saw motor, press outfeed with (4) Re-trim Saws. -- Complete with: (1) Set used 6-bolt heads.
Equipment Location:EASTERN CDN
Jeff Terrill
800-374-5009 ext:349
LOBO MODEL SFJ-61G Single Sided, Semi-Automatic Finger Jointer/End Matching Shaper with: -- Motorized glue applicator. -- Sliding table 16" wide, operated by 2-HP hydraulic ram for smooth movement through the cutting spindles. Vertical & horizontal clamping cylinders, back-up blocks for splinter free cutting. -- Spindles: 1-HP upper & lower scoring motors, 3-HP trim/hog motor, including hogging head. 7.5-HP high-speed cope spindle, 6" high tooling capacity, allows horizontal or vertical finger jointing. -- Includes motorized glue applicator unit for finger jointing. Used tooling, some 10-mm finger jointing cutters. -- Available at additional cost: End matching tooling for, 1/2", 5/8" & 3/4" thick flooring.
Equipment Location:SOUTHWEST
Jeff Terrill
800-374-5009 ext:349
Western Machinery Group Finger Jointer
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Western Machinery Group finger Joiner
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
WESTERN PNEUMATICS HIGH SPEED FINGERJOINTER, COMPLETE AND INCLUDING: -- Model FJW248 LA-W Right & Left Shaper Section. - Cap.: 3/4" - 1-1/2" Max. thickness, 1-1/2" - 8" max. width, 5-1/2" min. - 48" max. length. -- Equipped with: (2) Scoring saws, 5 HP - 3,600 RPM motors,(2) trim saws, 7-1/2 HP - 3,600 RPM motors, (2) shaper motors, 20 HP - direct drive 3,600 RPM motors, 2-1/2" wide WESTERN feed chain with lugs on 9" centers, angle transfer conveyor with 15 HP AC variable speed drive with up to 150-lug per min speed with lugs on 9" centers, air bag pressure head with quick change feature & brush holddowns. -- APQUIP Extrusion Type Glue Applicator with meter mixing system. -- Model CTW242LA Corner Transfer to the assembly press via manual corner transfer. -- Model AIT4RA 12'Assembly Infeed Conveyor with ramp up/down, powered side alignment rolls, and dual top and bottom pre-assembly rolls. -- (1) Pair Model SCD248RA Side Trim Heads, each with 7-1/2 HP motor. -- Model FS224RA Flying Cutoff Saw. -- Model BP220RH Assembly Press: 24' with hydraulic squeeze board press and (3) 7-1/2 HP Retrim Saws. -- Automatic Cycling Outfeed: Feed speed varies automatically from 50 to 200 FPM, depending incoming block lengths. Pieces advance through the cutoff saw to a moveable limit switch and are cut to length with bottom mounted 7-1/2 HP Flying Cutoff Saw for continuous non-stop assembly, the cut to length piece drops down into a final squeeze chamber while the next piece is cut to length, finished lengths are pushed out by the next piece onto material outfeed arms. -- Includes: (2) sets of carbide insert heads, 4-wing and 8-wing and (1) set of high speed steel heads. -- All Manuals for Finger Jointer and the APQUIP Glue Applicator.
Equipment Location:SOUTHEAST
Jeff Terrill
800-374-5009 ext:349