• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
31 Results Found for Knife Grinder Viewing 1 - 20 of 31 results
RECENTLY ADDED
STANDARD LISTINGS

CAN-CAR Knife Grinder

Call for Price
Can-Car Knife Sharpener Serial# 1329-23-72
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
STROB GRINDER FEED W-725
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
CANTEK JF-330A Profile Knife Grinder -- Clamping length of 12" (300mm) for both straight and profile grind; dia. of knife swing 12" (300mm). -- Grinding arbor: 3 HP grinding motor with VFD (LED Readout) drive from 1500 to 4200 RPM. Quick change removable (140mm) wheel adapter. Machine set for axial constant grinding and template set up on right hand side. Over the wheel precision diamond dresser assembly for dressing and dimensioning of wheel. Manual positioning: of grinding wheel to tool; positioning of back clearance angle and side clearance angle 5°/10°/15°. Quick change stylus turret for applications. (6) included with machine. -- Carriage: SCHNEEBERGER lineal bearing table movement. Table movement 12" x 6". -- Coolant system: 1/8 HP motor from coolant pump located in tank below. (3) coolant nozzles for smooth flow of coolant to knife rest during grinding. Additional hose with nozzle for cleanup. Stainless steel splash guards throughout! -- Includes: Set up tools, coolant, HD worklight, grinding wheels and (1) arbor of choice - (1.25", 1.5", 40mm, 1-13/16", 2.125" or 50 mm). -- Training and (1) year warranty included.
Equipment Location:PACIFIC NORTHWEST, AL
EX-FACTORY INC.
704-841-2001
Capital Knife Grinder
Equipment Location:Forks, WA
LPS Equipment & Acquisition Co.
731-986-4351
ERMA ASM 45 automatic knife grinder for chipper, planer and paper knives. with a working length of 4,300 mm (168") length capacity. -- Grinding motor with 7.5kW (10 HP) for the grinding head. -- Flood coolant system. -- Variable speed head travel and replaceable ways. -- Magnetic knife bar 10' x 8". -- Manuals and some tools.
Equipment Location:EASTERN CDN, AL
EX-FACTORY INC.
704-841-2001
GOECKEL G 65EL Automatic Straight Knife Grinder;Working length up to 5,080 mm (200") and 254 mm (10") for either planer or chipper knives. -- Construction: Welded in cell design. Guideways hardened and ground solid ways. Machine table electromagnetic with rotating chuck. -- Downfeed system: Servo variable speed down feed with impulse feed; end-end and rapid positioning. Feed rate 0.0002 ~ 0.02 mm/Min. -- Carriage/Head: Servo controlled variable speed carriage drive, 0.02 ~ 30 m/Min adjustable via potentiometer. Grinding motor 40 HP (30 kW) with high precision bearings, tiltable for cross and radial grinding with 14" tool diameter. -- Controls: Programmable digital display and electronic hand wheel. Counter for counting finish passes. Automatic grinding cycles and wheel advance. -- Equipped with: 14" Nut inserted ring wheel flange, motorized 10” wide x 200” long magnetic table with rotation of 180°. Magnetic segmented chuck performs a variety of grinding operations. Table has built-in hood; wheel dresser is accurate and accessible to the operator. -- Grinding tolerance 0.005" per meter over full set of knives. Grinding wheels are changed via a bolt flange.. Automatic sizing units with wheel wear compensation for wear. Retractable front stop bar system. Coolant filter tank with two pumps. -- Comes with: Service manual, operating manual and electrical diagrams.Owner states that the magnetic table is in good operational condition, machine will be available in August 2018.
Equipment Location:SOUTHWEST
Bob Dykstra
800-374-5009 ext:378
HANCHETT DN-54 Aotomatic Straight Knife Grinder -- With working length of 54" for planer and chipper knives. Automatic traverse and wheel advance. Includes both the ACME and standard bar surfaces to handle both planer and chipper knives. -- Includes motor starters.
Equipment Location:MTN/CENTRAL CDN
Bob Dykstra
800-374-5009 ext:378
56" GRINDER
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Hanchett Size 110" VKF Table Knife Grinder S/N 65
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Hanchett 38" Knife Grinder S/N 315
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
HANCHETT SIZE 48 TYPE DN KNIFE GRINDER S/N 8221
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351

Michigan Knife Grinder

Call for Price
MI Knife Grinder
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351

Morbark Knife Grinder

Call for Price
Morbark Knife Grinder with 3 Hp electric Motor
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
MVM AF 2000 Automatic Grinder for straight knives up to a 80" (2000mm) in length for planer, veneer and paper knives. Stepless variable speed carriage with travel speed up to 60 FPM (20 meters/min). -- Automatic wheel down feed can be set for: per pass and total downfeed. -- Grinding motor 8.5 HP (6.3 kW) with 16 mm bore. Grinding chuck tiltable 0 to 90ø. Chuck clearence to wheel 4.3" (100 mm). Chuck width 4.7" (120 mm). -- Heavy duty coolant system with static magnetic filter. -- 200 mm (8") Segmented holder with 6 segments. Mechanical T-groove chuck for stack grinding of knives with step blocks. Head travel guides are covered. Head travels on hardened and ground replaceable wear strips.
Equipment Location:WEST COAST
Bob Dykstra
800-374-5009 ext:378
Grinder for straight knives up to a 33" in length ideal for chipper, shaving and planer knives. Automatic head travel with travel speed of 33 FPM. -- Automatic wheel down feed can be set for per pass and total downfeed. -- 2 HP Grinding motor with 16 mm spindle/shaft. -- Grinding chuck tiltable 0°to 90°and grinding head tilts +5°to -30°. -- Chuck clearence to wheel 1.2"and chuck width is 3.5". -- Heavy duty coolant system with static magnetic filter. -- Mechanical T-groove chuck for stack grinding of knives with step blocks. -- Head travels on hardened and ground replaceable wear strips and head travel guides are covered. -- Includes: (1) 125 mm vitrified cup wheel, (1) set of blade clamps and (1) set of step blocks for stacking up to (4) planer knives, (1/8" x 40° back clearence). -- Additional grinding wheel grit available.
Equipment Location:NORTHEAST
Bob Dykstra
800-374-5009 ext:378
MVM - GM 1000, ...Straight Knife Grinder.For straight knives up to a 39" in length: ideal for Planer and Chipper knives. Head speed: Automatic head travel with speed up to 33 FPM. Automatic wheel down feed can be set per pass and for total down feed.Grinding Motor: 2 HP Grinding motor with 16 mm spindle/shaft. Grinding chuck tiltable 0° to 90°, and grinding head tilts +5° to -30°. Chuck clearance to wheel is 1.2" and chuck width is 3-1/2".Coolant: Heavy Duty flood coolant system with static magnetic filter. Chuck: Newly Rebuilt Magnetic T-groove chuck to stack grinding of knives with step blocks. Head travels on hardened and ground replaceable wear strips and head travel guides.NOTE: Machine is in EX-FACTORY's "Zeeland, MI" Warehouse and Repair Facility. - Thoroughly checked out and ready to ship!
Equipment Location:MIDWEST
Bob Dykstra
800-374-5009 ext:378
MVM - GM 1000 41", ...Straight Knife Grinder.For straight knives up to a 39" in length: ideal for Planer and Chipper knives. Head speed: Automatic head travel with speed up to 33 FPM. Automatic wheel down feed can be set per pass and for total down feed.Grinding Motor: 2 HP Grinding motor with 16 mm spindle/shaft. Grinding chuck tiltable 0° to 90°, and grinding head tilts +5° to -30°. Chuck clearance to wheel is 1.2" and chuck width is 3-1/2".Coolant: Heavy Duty flood coolant system with static magnetic filter. Chuck: Magnetic T-groove chuck to stack grinding of knives with step blocks. Head travels on hardened and ground replaceable wear strips and head travel guides.
Equipment Location:SOUTHWEST
Bob Dykstra
800-374-5009 ext:378
MVM with 40” mechanical chuck -- Grinder for straight knives up to a 39" in length ideal for shaving, chipper and planer knives. -- Automatic head travel with travel speed of 33 FPM. -- Automatic wheel down feed can be set for per pass and total downfeed. -- 2 HP Grinding motor with 16 mm spindle/shaft. -- Grinding chuck tiltable 0°to 90° and grinding head tilts +5°to -30°. -- Chuck clearence to wheel 1.2" and chuck width is 3.9". -- Heavy duty coolant system with static magnetic filter. -- Mechanical T-groove chuck for stack grinding of knives with step blocks. -- Head travels on hardened and ground replaceable wear strips and head travel guides are covered. -- Includes: (1) 125 mm vitrified cup wheel for grinding and (1) set of Step blocks for stacking up to four planer knives at one grind. -- Warranty included on parts.ZX1000 Optional Accessories40” Magnetic Chuck option on ZX1000 MVM-ZX-0000900 $ 2,500 48” Magnetic Chuck option on ZX1230 MVM-ZX-0000901 $ 3,000(With tilling lever) T-Slot Device Mounts onto Magnetic Chuck $ 990 (Allows clamping + stack grinding knives up to 34”) Upgrade to 3.5HP & 6” Wheel (20mm bore) MVM-ZX-0000501 $ 880 Variable Carriage Speed (1 to 11 m/min) MVM-ZX-0001001 $ 1,600(Includes upgrade to metal control box with potentiometer) 400mm Super Hi-Power Mag Plate MVM-A-MP400 $ 1,750 (For grinding carbide inserts) Stops with sensors to limit the carriage travel MVM-ZX-000500 $ 660 (Requires external coolant tank and pump option) Step Blocks for stacking up to 4 planer knives MVM-AF2500-210XX $ 43 ea (Must specify knife thickness and back angle) Knife Extension resting blocks MVM-ZX-2579231600 $ 165 (Allow knives that are wider than the chuck to be referenced from the back) Rotary cutting edge references MVM-ZX-2579243000 $ 140 (Available on magnetic chuck only) External Coolant Tank and Pump XXX-ZX-000200 $ 1,200 (Standard machine uses the carriage bed as a coolant tank) 220v, single phase, Rotary Phase Converter (no loss in HP) RPC-3 $ 875 480v, 3ph, factory configuration $ 875 (or any voltage over 400
Equipment Location:NORTHEAST
Bob Dykstra
800-374-5009 ext:378
Grinder for straight knives up to a 53-1/2" (1,360 mm) in length for planer, veneer, paper, and chipper knives; stepless variable speed carriage with travel speed up to 40 FPM -- Manual-Automatic wheel down feed can be set per pass and total down-feed. -- 6.5 HP Grinding motor with 16 mm bore; grinding wheel at 2,800 RPM. -- Grinding chuck tiltable from 0° to 100°; chuck clearence to wheel is 4.3" (100 mm) and chuck width is 4.7" (120 mm). -- Heavy Duty coolant system with static magnetic filter. -- Equipped with: 200 mm (8") Segmented holder with (6) segments; mechanical T-groove chuck for stack grinding of knives with step blocks; covered head travel guides; head travel on hardened & ground replaceable wear strips. -- Includes: (1) 125 mm Vitrified cup wheel, -- Additional longer units available with grinding lengths of : 80" (2,000 mm), 120" (3,000 mm) and 178" (4,500 mm) - please contact us for pricing!
Equipment Location:NORTHEAST
Bob Dykstra
800-374-5009 ext:378
NEWMAN G280 Tub Style RotaryG Knife Grinder. Accepts 4 knives up to 28 inches in length. HAVE MANY DIFFERENT TYPES AND SIZES OF KNIFE GRINDERS, YOU CAN VISIT OUR SITE AT www.benjones.com to see our complete inventory.
Equipment Location:Columbus, GA
Ben Jones Machinery
706-324-2604