• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
11 Results Found for Knife Grinder Viewing 1 - 11 of 11 results
STANDARD LISTINGS
STROB GRINDER FEED W-725
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Capital Knife Grinder
Equipment Location:Forks, WA
LPS Equipment & Acquisition Co.
731-986-4351
HANCHETT SIZE 48 TYPE DN KNIFE GRINDER S/N 8221
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Hanchett 38" Knife Grinder S/N 315
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
HANCHETT DN-54 Aotomatic Straight Knife Grinder -- With working length of 54" for planer and chipper knives. Automatic traverse and wheel advance. Includes both the ACME and standard bar surfaces to handle both planer and chipper knives. -- Includes motor starters.
Equipment Location:MTN/CENTRAL CDN
Mark Green
800-374-5009 ext:332
Newman G-132 Knife Sharpener
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
REFORM AR 36 TYPE 6 Automatic Knife Grinder with working length to 144" Working dimensions 144" X 6" for straight knifes, chipper knives, paper or planer knives. (3) grinding modes Creep Feed, Reciprocal grind and Manual Down grind -- Machine ways: The REFORM carriage allows for easy wheel changing and adjustment from the front of the machine. The carriage rides on hardened precision ground steel bands. -- Grinding head carriage: The wide carriage design provides for even load distribution and rigidity. The head is carried on (2) sets of (4) bearings for the horizontal movement and they are adjustable. The (4) bearings used on the carriage side adjustment maintain high accuracy during grinding. -- Grinding head: It is driven by a 10 HP motor with a rim speed of 1,450 RPM. The head is slewable (tiltable) for Concave and Surface grinding. -- Head speed up and down the slides is from 6 FPM to 100 FPM with 2,4 HP motor. Grinding wheel has a 10" diameter wheel plus backer plate for quick changeover. -- Downfeed and control of grinding head: The primary head utilizes a servo motor coupled with an oversized "Ball Screw" to eliminate any play in the movement. The automatic electronic downfeed utilizes a AC servo motor with Digital electronic controls and positioning readouts. -- Adjustment from 0.00008" up to 0.008 stroke dowfeed . Grinding programs included in the Grinding cycle; Roughing, Finishing, Spark out and Reposition of the head to start point for "restart". -- Magnetic clamping table: (3) - rotating beds --144" x 6" Magnetic table width -- magnetized right to the edges for positive holding capacity through out the table length and width. The table is swivelable on a HD pivot shaft. Coolant tank (oil) 150 gal. with 17 GPM out puts at top head; also includes wash down hose to wash knives prior to removing from the bed. Includes: Operating manuals.
Equipment Location:EASTERN CDN
Mark Green
800-374-5009 ext:332
SIMONDS KNIFE GRINDER MODEL 9066104V..? 480 VOLTS, PHASE 3, HZ 60, AMPS 20, SER# 1896 10 HP MOTOR 11in GRINDING WHEEL, 9 FOOT TRACKS ASKING $7,500.00 CONTACT GAVIN 601-394-7796 JERRY 601-410-3415 DRAKE 601-788-7084
Equipment Location:State Line, MS
AlaMiss, Inc.
601-394-7796
WEINIG R 960 Profile Knife Grinder;Specifications: 9-3/8" Max. arbor length, tool dia. 11-3/4" max. to 4" minimum. -- Grinding wheel: speed inverter controlled; speeds from 1,500 to 3,000 RPM by 1.5 HP motor. -- Hydro-clamping of grinding wheel to arbor. -- Tool carriage movement with precision linear table bearings, setting gauges for axial constant, axial (side) clearance angle 0° - 20° -- Equipped with: Onboard diamond wheel dressing, 8-7/8" max. 6" min. grinding wheel dia.; 13-gal. coolant tank with 1.2 HP pump.Includes: Choice of arbor dia.
Equipment Location:NORTHEAST
Mark Green
800-374-5009 ext:332
WEINIG R 960 "STANDARD" Profile Knife Grinder;Specifications: 9-3/8" Max. arbor length, tool dia. 11-3/4" max. to 4" minimum. -- Grinding wheel: speed inverter controlled; speeds from 1,500 to 3,000 RPM by 1.5 HP motor. -- Hydro-clamping of grinding wheel to arbor. -- Tool carriage movement with precision linear table bearings, setting gauges for axial constant, axial (side) clearance angle 0° - 20° -- Equipped with: Onboard diamond wheel dressing, 8-7/8" max. 6" min. grinding wheel dia.; 13-gal. coolant tank with 1.2 HP pump.Includes: Arbor dia. of 40mm
Equipment Location:SOUTHWEST
Mark Green
800-374-5009 ext:332
WESTERN MACHINERY Cutterhead Grinder - Model 800E grinder for fingerjoint heads, L type planer side heads, carbide tipped and other woodworking cutterheads. Automatic table travel; air brake; flood coolant system. Handles large planer heads up to 16" diameter.See our full inventory at www.benjones.com
Equipment Location:Columbus, GA
Ben Jones Machinery
706-324-2604