• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
14 Results Found for Knife Grinder Viewing 1 - 14 of 14 results
STANDARD LISTINGS
PENDING
Armstrong Air Back Feed Band Saw Automatic Feeder Holder Armstrong Blue Band Saw Tipping Machine Includes all stands
Equipment Location:Lebanon, PA
Weaber Lumber
717-867-2212
STROB GRINDER FEED W-725
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Capital Knife Grinder
Equipment Location:Forks, WA
LPS Equipment & Acquisition Co.
731-986-4351
HANCHETT SIZE 48 TYPE DN KNIFE GRINDER S/N 8221
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
HANCHETT DN-54 Aotomatic Straight Knife Grinder -- With working length of 54" for planer and chipper knives. Automatic traverse and wheel advance. Includes both the ACME and standard bar surfaces to handle both planer and chipper knives. -- Includes motor starters.
Equipment Location:MTN/CENTRAL CDN
Bob Dykstra
800-374-5009 ext:378
Hanchett 38" Knife Grinder S/N 315
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
MVM - GM 1000, ...Straight Knife Grinder.For straight knives up to a 39" in length: ideal for Planer and Chipper knives. Head speed: Automatic head travel with speed up to 33 FPM. Automatic wheel down feed can be set per pass and for total down feed.Grinding Motor: 2 HP Grinding motor with 16 mm spindle/shaft. Grinding chuck tiltable 0° to 90°, and grinding head tilts +5° to -30°. Chuck clearance to wheel is 1.2" and chuck width is 3-1/2".Coolant: Heavy Duty flood coolant system with static magnetic filter. Chuck: Magnetic T-groove chuck to stack grinding of knives with step blocks. Head travels on hardened and ground replaceable wear strips and head travel guides.NOTE: Machine is in EX-FACTORY's "Zeeland, MI" Warehouse and Repair Facility. - Thoroughly checked out and ready to ship!
Equipment Location:MIDWEST
Bob Dykstra
800-374-5009 ext:378
MVM AF 2000 Automatic Grinder for straight knives up to a 80" (2000mm) in length for planer, veneer and paper knives. Stepless variable speed carriage with travel speed up to 60 FPM (20 meters/min). -- Automatic wheel down feed can be set for: per pass and total downfeed. -- Grinding motor 8.5 HP (6.3 kW) with 16 mm bore. Grinding chuck tiltable 0 to 90ø. Chuck clearence to wheel 4.3" (100 mm). Chuck width 4.7" (120 mm). -- Heavy duty coolant system with static magnetic filter. -- 200 mm (8") Segmented holder with 6 segments. Mechanical T-groove chuck for stack grinding of knives with step blocks. Head travel guides are covered. Head travels on hardened and ground replaceable wear strips.
Equipment Location:WEST COAST
Bob Dykstra
800-374-5009 ext:378
MVM - GM 1000 41", ...Straight Knife Grinder.For straight knives up to a 39" in length: ideal for Planer and Chipper knives. Head speed: Automatic head travel with speed up to 33 FPM. Automatic wheel down feed can be set per pass and for total down feed.Grinding Motor: 2 HP Grinding motor with 16 mm spindle/shaft. Grinding chuck tiltable 0° to 90°, and grinding head tilts +5° to -30°. Chuck clearance to wheel is 1.2" and chuck width is 3-1/2".Coolant: Heavy Duty flood coolant system with static magnetic filter. Chuck: Magnetic T-groove chuck to stack grinding of knives with step blocks. Head travels on hardened and ground replaceable wear strips and head travel guides.
Equipment Location:SOUTHWEST
Bob Dykstra
800-374-5009 ext:378
Newman G-132 Knife Sharpener
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
SIMONDS KNIFE GRINDER MODEL 9066104V..? 480 VOLTS, PHASE 3, HZ 60, AMPS 20, SER# 1896 10 HP MOTOR 11in GRINDING WHEEL, 9 FOOT TRACKS ASKING $7,500.00 CONTACT GAVIN 601-394-7796 JERRY 601-410-3415 DRAKE 601-788-7084
Equipment Location:State Line, MS
AlaMiss, Inc.
601-394-7796
WEINIG R 960 Profile Knife Grinder;Specifications: 9-3/8" Max. arbor length, tool dia. 11-3/4" max. to 4" minimum. -- Grinding wheel: speed inverter controlled; speeds from 1,500 to 3,000 RPM by 1.5 HP motor. -- Hydro-clamping of grinding wheel to arbor. -- Tool carriage movement with precision linear table bearings, setting gauges for axial constant, axial (side) clearance angle 0° - 20° -- Equipped with: Onboard diamond wheel dressing, 8-7/8" max. 6" min. grinding wheel dia.; 13-gal. coolant tank with 1.2 HP pump.Includes: Choice of arbor dia.
Equipment Location:NORTHEAST
Bob Dykstra
800-374-5009 ext:378
WEINIG R912 Automatic grinder for straight knives, mill to pattern and fingerjoint heads, ground in the cutterhead. Solid spindle carrier with precise guides for the concentricity below .0002". -- Grinding wheel dia. 5" with bore dia. 20 mm. Grinding spindle 2 HP, with spindle speed of 4,600 RPM. Clearence angle at radial knife back of 15 - 35ø. -- Coolant pump flood works for cooling of the grinding wheel at the cutterhead with 2 HP pump. -- Grinding table ball threaded spindle drive for table and variable depth og grinding. -- Cutting circle 4" to 12" with working lenght of 13". Indexing plates for 1-36 knives. -- Operating panel with key pad and digital readouts. Electronic control for programming.
Equipment Location:MIDWEST
Bob Dykstra
800-374-5009 ext:378
WEINIG RONDAMAT R960 Powerlock Profile Tool Grinder -- Working dimensions 9-3/8" max. cutterhead length, tool dia. 3-15/16" to 11-13/16". --Specifications -- Motor: Inverter controled grinding wheel speed of 1,500 - 3,000 RPM with 1.5 HP motor. -- Productivity package: Machine light, back clearance angle motorized; grinding wheel advance motorized; setting of side clearance angle pneumatically. -- Tool carriage movement with precision linear table bearings, setting gauges for axial constant. tilting head assembly with radial (back) clearance angle 10° - 30° --Axial (side) clearance angle 0° - 20°. --Onboard diamond wheel dressing, 8-7/8" max. 6" min. grinding wheel diameter. 13-gal. coolant tank with 1.2 HP pump. --Equipped with & Features Includes: --All manuals and setup tools; (1) HSK arbor for conventional heads. --Grinder has the Locking bracket & Jack springs for transport --Reconditioned: The carriage bearings have been replaced, The spindles bearing has not been replaced, not necessary as per the Weinig Tech
Equipment Location:MIDWEST
Bob Dykstra
800-374-5009 ext:378