• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
20 Results Found for Knife Grinder Viewing 1 - 20 of 20 results
STANDARD LISTINGS
Rotary knife grinder made by Arasmith Manufacturing in GA. This unit is available immediately and is located at out facility in Talladega, AL.
Equipment Location:Talladega, AL
Woodland Parts & Service Inc
256-362-5097

CAN-CAR Knife Grinder

Call for Price
Can-Car Knife Sharpener Serial# 1329-23-72
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
STROB GRINDER FEED W-725
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Capital Knife Grinder
Equipment Location:Forks, WA
LPS Equipment & Acquisition Co.
731-986-4351
HANCHETT SIZE 48 TYPE DN KNIFE GRINDER S/N 8221
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Hanchett 38" Knife Grinder S/N 315
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Hanchett 40" Travel Bed - Knife Grinder Serial# 74
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
HANCHETT DN-54 Aotomatic Straight Knife Grinder -- With working length of 54" for planer and chipper knives. Automatic traverse and wheel advance. Includes both the ACME and standard bar surfaces to handle both planer and chipper knives. -- Includes motor starters.
Equipment Location:MTN/CENTRAL CDN
EX-FACTORY INC.
704-841-2001
MVM GM 1000 Straight Knife Grinder;For straight knives up to a 39" in length: ideal for planer and chipper knives. Head speed: Automatic head travel with speed up to 33 FPM. Automatic wheel down feed can be set for per pass and total downfeed.Grinding Motor: 2 HP Grinding motor with 16 mm spindle/shaft. Grinding chuck tiltable 0°to 90°and grinding head tilts +5°to -30°. Chuck clearence to wheel 1.2" and chuck width is 3.5".Coolant: Heavy duty flood coolant system with static magnetic filter. Chuck: Magnetic T-groove chuck to stack grinding of knives with step blocks. Head travels on hardened and ground replaceable wear strips and head travel guides.NOTE: Machine is in EX-FACTORY'S "Zeeland, MI" warehouse and repair facility. - Thoroughly checked out and ready to ship!
Equipment Location:MIDWEST, AL
EX-FACTORY INC.
704-841-2001
NEWMAN G280 Tub Style RotaryG Knife Grinder. Accepts 4 knives up to 28 inches in length. HAVE MANY DIFFERENT TYPES AND SIZES OF KNIFE GRINDERS, YOU CAN VISIT OUR SITE AT www.benjones.com to see our complete inventory.
Equipment Location:Columbus, GA
Ben Jones Machinery
706-324-2604
Newman G-132 Knife Sharpener
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Newman G-280 4 Knife Grinder
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351

Newman G280 Knife Grinder

Call for Price
PENDING
NEWMAN G280 TUB KNIFE GRINDER
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
REFORM 5 AR 32 Automatic Knife Grinder with working length to 125"; Working dimensions 125" X 6" (3,100 x 150 mm) for straight knifes, chipper knives, paper or planer knives. (3) grinding modes Creep Feed, Reciprocal grind and Manual Down grind -- Machine ways: The REFORM carriage allows for easy wheel changing and adjustment from the front of the machine. The carriage rides on hardened precision ground steel bands. -- Grinding head carriage: The wide carriage design provides for even load distribution and rigidity. The head is carried on (2) sets of (4) bearings for the horizontal movement and they are adjustable. The (4) bearings used on the carriage side adjustment maintain high accuracy during grinding. -- Grinding head: It is driven by a 10 HP motor with a rim speed of 1,450 RPM. The head is slewable (tiltable) for Concave and Surface grinding. -- Head speed up and down the slides is from 6 FPM to 100 FPM with 2,4 HP motor. Grinding wheel has a 10" diameter wheel plus backer plate for quick changeover. -- Downfeed and control of grinding head: The primary head utilizes a servo motor coupled with an oversized "Ball Screw" to eliminate any play in the movement. The automatic electronic downfeed utilizes a AC servo motor with Digital electronic controls and positioning readouts. -- Adjustment from 0.00008" up to 0.008 stroke dowfeed . Grinding programs included in the Grinding cycle; Roughing, Finishing, Spark out and Reposition of the head to start point for "restart". -- Magnetic clamping table: (3) - rotating beds --125" x 6" Magnetic table width -- magnetized right to the edges for positive holding capacity through out the table length and width. The table is swivelable on a HD pivot shaft. Coolant tank (oil) 150 gal. with 17 GPM out puts at top head; also includes wash down hose to wash knives prior to removing from the bed. Includes: Operating manuals.Special note: Head drive gear is being replaced.
Equipment Location:MID ATLANTIC
EX-FACTORY INC.
704-841-2001
Equipment Location:Wykoff, MN
Fillmore Sawmill Corp
507-352-6546
SIMONDS KNIFE GRINDER MODEL 9066104V..? 480 VOLTS, PHASE 3, HZ 60, AMPS 20, SER# 1896 10 HP MOTOR 11in GRINDING WHEEL, 9 FOOT TRACKS ASKING $9,500.00 CONTACT GAVIN 601-394-7796
Equipment Location:State Line, MS
AlaMiss, Inc.
601-394-7796
WEINIG R 912 Automatic Profile & Straight Knife Grinder: For straight knives, mill-to-pattern and fingerjoint heads, ground in the cutterhead. Solid spindle carrier with precise guides for the concentricity below 0.0002". -- Grinding wheel dia. 5" with bore dia. of 20 mm. Grinding spindle 2 HP motor, with spindle speed of 4,600 RPM. Clearence angle at radial knife back of 15 - 35°. -- Coolant pump flood works for cooling of the grinding wheel at the cutterhead with 1.2 HP pump with tank cap. of 14 gallon. -- Grinding table with precision roller bearings for manual and automatic operation. Ball threaded spindle drive for table and variable for depth grinding. -- Cutting circle 4" to 12" with working length of 12" (modified from standard 10-1/4"). Indexing plates for 1 - 36 knives. -- The machine is operated from the front side of the machine; Operating panel with foil key pad and digital readouts. Electronic control for automatic programming. Machine will automatically shut off at completion of grinding cycle.
Equipment Location:MTN/CENTRAL CDN
EX-FACTORY INC.
704-841-2001
WEINIG R 960 Profile Knife Grinder;Specifications: 9-3/8" Max. arbor length, tool dia. 11-3/4" max. to 4" minimum. -- Grinding wheel: speed inverter controlled; speeds from 1,500 to 3,000 RPM by 1.5 HP motor. -- Hydro-clamping of grinding wheel to arbor. -- Tool carriage movement with precision linear table bearings, setting gauges for axial constant, axial (side) clearance angle 0° - 20° -- Equipped with: Onboard diamond wheel dressing, 8-7/8" max. 6" min. grinding wheel dia.; 13-gal. coolant tank with 1.2 HP pump.Includes: Choice of arbor dia.
Equipment Location:NORTHEAST
EX-FACTORY INC.
704-841-2001
WEINIG R 960 Profile Knife Grinder; 9-3/8" Max. arbor length, tool dia. 11-3/4" max. to 4" minimum. -- Grinding wheel: Speed inverter controlled; speeds from 1,500 to 3,000 RPM by 1.5 HP motor. -- Hydro-clamping of grinding wheel to arbor. -- Productivity package: Machine light, back clearance angle motorized; grinding wheel advance motorized; setting of side clearance angle pneumatically. Tool carriage movement with precision linear table bearings, setting gauges for axial constant. tilting head assembly with radial (back) clearance angle 10° - 30°, axial (side) clearance angle 0° - 20°. -- Includes: Onboard diamond wheel dressing, 8-7/8" max. 6" min. grinding wheel dia.; 13-gal. coolant tank with 1.2 HP pump. Manuals and set up tools. -- Arbor: dia. 40 mm.
Equipment Location:EASTERN CDN
EX-FACTORY INC.
704-841-2001
WESTERN MACHINERY Cutterhead Grinder - Model 800E grinder for fingerjoint heads, L type planer side heads, carbide tipped and other woodworking cutterheads. Automatic table travel; air brake; flood coolant system. Handles large planer heads up to 16" diameter.See our full inventory at www.benjones.com
Equipment Location:Columbus, GA
Ben Jones Machinery
706-324-2604