Logging Equipment For Sale

"CB LINKAGE" AREA TIP TO TIP- 6.0FT2; MAX OPENING 85IN; MAX CLOSING 5.25IN OPEN TO CLOSE 4 SECONDS ROTOBEC RPA4570 GRAPPLE W/ SAW CB LINKAGE

2006 Rottne SMV, 8 wheeled, 1 set track chains, serial #535711, 15,274 hours, approximate 50 hours on engine, complete oil change Oct. 2022. Price Reduced! $80,000 OBO 570-660-5693

2014 Rottne H20B, 9800 hrs, SP 761 head, 3/4 chain conversion, tracks and chains included, preheater, fire suppression, very tight machine, working daily. $225,000 Mike 802-579-9655

2020 Tigercat 620E, 5,200 hours, 52" grapple, winch, 250HP Fiat engine, tires 32x35, new chains w/180 hours. $245,000 509-993-4144

2022 Tigercat 234B sitting on a 150 LT Big John trailer mounted to it is a ptd264 CSI dilemma with a 4400 CSI slasher saw on 20 foot cradle. Automatic fire suppression a must-have for insurance companies already installed. Our meter reads 609 hours. Asking price $340k all reasonable offers considered 756-505-1338

Low hour very nice Tigercat 720G. Almost new disc, new teeth, bearings and seals in the saw head. Has been through our shop and ready to go to work. Buncher is tight and dry. Equipment financing and delivery available.

2017 Tigercat 625E, 9500 hours, EHS transmission, 45/78x32 front tires at 80%, dueling rings, 28x26 rear tires with 23.1x26 duals at 80%, joystick steering, rotating seat, clock heater, fuel fired pre-heater, LED light package, clean one owner machine. Machine is ready for the woods. $239,000

2019 Tigercat 724G, 6300 hours just serviced, ready to work, price negotiable. $150,000 919-965-7399

2007 Timbco 425 EXL- resealed valve, completely serviced, new bearings in final drives, excellent Berco undercarriage with 28 inch pads. Equipped with Quadco 22B Hotsaw with 360 rotator-financing available for qualified buyers

1997 Timberjack 360 Grapple skidder with winch. Engine completely gone through with new main seals, head, and turbo within last few hundred hours. Front axle ring and pinion replaced around 14k hours. Grapple snubber was line bored and replaced few hundred hours ago. Steering valve was replaced with a new Deere valve. Doesn't have A/C but comes with a new heater blower unit for the cab. Comes with 4 ice chains and is ready to pull wood. $38000 585-739-1011

1992 Timberjack 450C, first year with the steering wheel. Second owner.New 230hp 5.9 Cummins,new transmission,new mounts, steering cylinder pins and bushings, repacked cylinders,new brakes,glass and paint. 400hrs run time on machine after rehab. REDUCED to $34,500 · Call Jared 401-623-0347

2004 Timberjack 360 D Cable skidder 540 John Deere engine New turbo New head New injectors New computer, updated mounting kit. Rebuilt winch, New Diamond chains used once. center pin tight and dry. Good Machine needs nothing. Ready to work! $68,000 OBO

1997 Timberjack 460, New Tires, Runs Good, $60,000 obo or or Trade for a Loader Truck or Skid Loader · 563-599-9191

2005 timber king TK456 forwarder. 18,948 hours on machine .3409 hours on a new 6068 John Deere engine .double diamond chains at 80%, rear tracks at 25% ,spare wheel and tire 700 x 26 ,and miscellaneous new and used parts .Price Reduced! $84,900 for more information call 717-994-6100 .

Timberking 360 Fellerbuncher-Center post 22 inch hot saw. Runs and operates well

2001 Timberking TK711HD Feller Buncher - Cat 3126 Engine, 2nd owner, owned since 2006, 5,000 org. hrs, New bottom chains/sprockets/rollers. A/c, Heat and spare parts $80,000 · Call 732-271-9658

2018 TimberPro TL735D Track Feller Buncher $365000 724-456-8452 Includes more capable Quadco 2900-QU Intermittent Head w/ 29" cut capacity. Built in Ansul fire system. Solid machine, ready to work.

2012 Timberpro 735B, 22" Quadco C 360 rotation, 8450 hours Asking $235,000 Call Jared 216-244-4450

2005 Valmet 425 EXL with 445 EXL bottom and finals, well maintained, 8.3 Cummins, excellent undercarriage, final drives serviced, valve bank resealed, replaced cooling package, factory pressures reset, equipped with a Quadco 360 hotsaw-trades on bulldozer considered. Financing available to qualified buyers.

Valmet 430 FXL w/ Rolly II Head, Eaton Computer, 8000 hrs, undercarriage has 500 hrs, 8.3 Cummins, Already Plumbed for a Hot Saw as well, $150,000