• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
26 Results Found for Mobile Wood Grinder Viewing 1 - 20 of 26 results
RECENTLY ADDED
STANDARD LISTINGS
2003 Morbark 6600 Horizontal Grinder - Excellent condition - 1000 horsepower CAT 3412 engine - IQAN system - New bed chains and floors - New hydraulic pump - New belly belt this year - Turbos new this year - New stacking belt conveyor system - Upgraded mill - New bearings - New infeed chain in last 2 years - Engine has never been apart - Regular maintenance, filters changed every 250 hours.
Equipment Location:
Apollo Equipment
503-585-1442
1996 Morbark 5600 Horizontal Grinder - 800 horsepower CAT 3412 engine - Mag roller - Remote - Hydraulic fittings and hoses replaced throughout - Drum rebuilt - Machine is built heavy duty - Very good condition
Equipment Location:KS
Apollo Equipment
503-585-1442
One owner, used for grinding logs in mulch, no leaks, good tires. Includes 2 screens (2" and 5"), 2 remotes, drive belts, and manuals.
Equipment Location:Smyrna, GA
GrinderCrusherScreen.com
770-433-2670
Machine Number: 1024 Machine Type: Forestry Horz Grinder Manufacturer: Morbark Model #: 6600 HG Year: 2008 2008 Morbark 6600 HG C27 engine 1050 Hp 2800 hrs.
Equipment Location:Blowing Rock, NC
Carolina Used Machinery
828-773-2204
Machine Number: 1111 Machine Type: Forestry Horz Grinder Manufacturer: Morbark Model #: 3800 Year: 2010 Location: Mid West Morbark 3800 Mobile Grinder 8500 Hours New JD Motor Also Chipper Knives
Equipment Location:Blowing Rock, NC
Carolina Used Machinery
828-773-2204
1989 Morbark 23 Whole Tree Chipper - Cummins twin turbo engine - Good condition
Equipment Location:Largo, FL
Apollo Equipment
503-585-1442
Well maintained, several extra parts (screens, tips, etc). Engine needs rebuilt
Equipment Location:Smyrna, GA
GrinderCrusherScreen.com
770-433-2670
New set of mill drive belts, all new tires. Very well maintained. Several sets of screens and misc parts.
Equipment Location:Smyrna, GA
GrinderCrusherScreen.com
770-433-2670
Service/Parts Replaced in the last 2 years... - Replaced feed yoke roller, gearbox, anvil, and hydraulic motor (11/15) - Replaced belly belt, flashing, both bearings on tail pulley, 4 bearings on return pulleys, discharge belt, shaft and both bearings on head pulley. Adjusted feed chains, fan belts, and sealed hydraulic filter covers (11/14 @ 8484 hrs) - Replaced o-ring on hydraulic fan pump (6/14 @ 8023 hrs) - Replaced left feed chain motor (5/14 @ 7931 hrs) - Replaced 30 hammer pattern with 18 hammer pattern; reused hammers (from 11/13) and installed new rakers and rods. (5/14 @ 7842 hrs) - Engine timing gear train repaired by Fabick (4/14 @ 7810 hrs) - Replaced left turbocharger and injector #1 (3/14 @ 7749 hrs) - Replaced HEUI and fuel transfer pumps (2/14 @ 7708 hrs)
Equipment Location:Smyrna, GA
GrinderCrusherScreen.com
770-433-2670
Used in municipality most of it's life grinding green waste. Straight, good running grinder. Reversing fan. 1700 hours on engine since top end rebuild. Mill rebuilt in 2010
Equipment Location:Smyrna, GA
GrinderCrusherScreen.com
770-433-2670
2014 Morbark 40/36 NCL Track Drum Chipper • Cat C18 600HP Tier III Engine • PT Tech HPTO14FX Hydraulic Clutch • M.I.C.S. (Morbark Integrated Control System) • Remote control with tethered back-up system • 320L Caterpillar undercarriage with 24" (600 mm) single grouser pads with spring kit and rock guards for the front and rear • Straight discharge chute including hydraulically operated chip deflect with vertical and horizontal adjustment, clean-out door • Low hydraulic oil level shut down adapter • Morbark automatic reversing fan system • 36" DIAMETER X 43-1/2" W, ADVANTAGE DRUM, 8 KNIFE, 5/8" CHIP • CAT Limited Warranty on Major components will end on 4/15/2017 • CAT Engine Gold ESC will end on 4/15/2019 or 5,000 hours
Equipment Location:Columbus, OH
Columbus Equipment Company
937-424-7678
New floor, chains, hammers, rakes, rods, screens, inserts, belly belt, side skirts, drive belts, rear bumper, cleaner bar on feed wheel, tail bearings, chain bearings, ladders, and servicing all oils filters and repairing any welds that need attention.
Equipment Location:Smyrna, GA
GrinderCrusherScreen.com
770-433-2670
0 hours on new ECM. Excellent condition.
Equipment Location:Smyrna, GA
GrinderCrusherScreen.com
770-433-2670
Rebuilt mill with new main shaft, new rods, new hammers, new bearings and housings. Conveyor rebuilt with new bearings and shafts. New 5" and 3" screens.
Equipment Location:Smyrna, GA
GrinderCrusherScreen.com
770-433-2670
New hammers, rods, and rebuilt clutch 200 hours ago.
Equipment Location:Smyrna, GA
GrinderCrusherScreen.com
770-433-2670
2008 MORBARK 40/36 DRUM CHIPPER 6 CYL JOHN DEERE 600HP ONBOARD AIR COMPRESSER
Equipment Location:Manton, MI
LUTKE EQUIPMENT LLC
231-824-9505
Engine: One 400-HP Electric to Mill and one 100-HP Electric to hydraulic system 2013 Model, straight unit with approximately 1,100 hours, 30-hammer pattern, magnetic head pulley, torque limiter and starter panel Little attention needed here on this straight, low-hour horizontal grinder – take advantage of fuel savings with this electric grinder on your yard! 90-day parts-only warranty on machine Price: $325,000 For more information, please contact Wally Robison at 1-800-831-0042
Equipment Location:Winn, MI
Morbark, LLC
989-866-2381
2003 Morbark 5600 Horizontal Grinder - Cat 3412E Engine - 1050 Horsepower - 5th Wheel Hitch - Still in use - Extras - Very Good Condition
Equipment Location:Largo, FL
Apollo Equipment
503-585-1442
2005 Morbark 1300A Tub Grinder - Cat 3412 Engine - 1000 Horsepower - 1000 Rebuild Hours - Complete rebuild, including clutch - Very Good Condition
Equipment Location:Largo, FL
Apollo Equipment
503-585-1442
2004 Morbark 1300A Tub Grinder - Cat 3412 Engine - 860 Horsepower - 9000 Hours - 5th Wheel Hitch - Good Condition
Equipment Location:Largo, FL
Apollo Equipment
503-585-1442