You Have Selected

 
 
  • Used
  • New
 
  •  
 
  •  
 
  •  
 

 
537 Results Found for BioMass Viewing 1 - 20 of 537 results
RECENTLY ADDED
PREMIUM LISTINGS
For sale is one (1)Used Airoflex (Hydr-O-Flex) Truck and Trailer Dumper/Tipper manufactured by Air-O-Flex Equipment Company, and installed in 1997 for in-pit unloading. This is a back-on grain tipper designed with a full 10’ x 70’ truck and trailer deck and single wheel locks. It has a 60 ton capacity with a 35 degree tilt angle. This sale also includes a hydraulic power unit with two (2) 40 hp motors, two (2) 3520V35A5-1CC-22R Vickers vane pumps and an estimated 400 gallon capacity tank plus two (2) 12” main, 335” stroke, Airoflex refurbished cylinders.
Equipment Location:Muscatine, IA
Airoflex Equipment
651-631-2527
Well maintained Whole tree track chipper. 1900t by Bandit industries. Mostly used for ice storm clean up and ROW chipping.
Equipment Location:Madisonville, KY
Charbon Contracting
270-821-2742
Cleaver-Brooks Boiler, 80 HP, 4 Pass, Currently running on Propane, also will run on Natural Gas, Retubed 2014,Excellent Condition, See in Service till November, Always on Water Treatment $17,500 obo 336-312-3120
Equipment Location:Greensboro, NC
A P Hubbard Lumber Co.
336-312-3120
1998 FECON MZA 3250 Horizontal Grinder -- 2,275 original hours -- 325hp 3306 CAT engine -- Feed drum rebuilt in 2009 was $7,250 -- All new flail heads recently installed for $3,600 -- All manuals included -- It is 28' long -- 8.5' wide -- and weighs 30,000lbs -- This grinder is in very good condition -- It is with the second owner for about 2 years and the first owner was a municipality that really never moved it at all -- This machine is great for pallets,wood waste,tree limbs,construction and demolition material,asphalt, and small stumps -- SELL PRICE IS; $35,000 CONTACT JIM KERN AT 570-664-1368 kern88@yahoo.com; www.kernLLC.com.
Equipment Location:Saylorsburg, PA
Kern Machinery LLC
570-664-1368
1999 Morbark model 20, Total chip harvester, Cummins 475 HP, Three knife, New anvil knives, Counter knives, Excellent condition, many spare parts $80,000 OBO 570-640-7628
Equipment Location:Schuylkill Haven, PA
Reyn Mill Inc.
570-754-7628
Morbark 22RXL Whole Tree Chipper. Serial# 1533. 600 HP Cummins. Twin disc clutch. 500 hrs. on engine, clutch, and wear plate Peterson Pacific Flail Debarker. Serial# IDH97473. 3306 Caterpillar $98,000.00
Equipment Location:Hardinsaburg, KY
Snyder Timber LLC
270-617-2278
2004 Morbark 6036 W/Loader 70% tires $80000 936-591-1143
Equipment Location:Center, TX
H5 Farms
936-591-1143
Peterson Pacific 4400, Grinder Excellent Condition; 5000 hours, 12V92 V-12 Cat Engine $110,000 413-268-3600 or 413-584-4471
Equipment Location:Williamsburg, MA
Lashway Logging
413-268-3600
2003 Precision model 2366 Chipper, 23” capacity 3 knife design, enclosed cab, 700 HP Cummins Diesel Engine, pilot controls with reversible Saw Buck. Various spare parts included. Call Lescher Tree Care & Land Clearing, Inc. 440-930-8744
Equipment Location:Avon Lake, OH
Lescher Tree Care
440-930-8744
2006 Precision Husky 2366, 8000 hrs , 3412 Cat 900 hp pro heat, Extra Knives, New Belts, Lost Contract 70,000.00 OBO 724-657-7532
Equipment Location:New Galilee, PA
mjs hardwoods
724-657-7532
STANDARD LISTINGS
ACROWOOD 52” 5216-6 Chipper with the following major features: -- 52” Disc. -- Slant Disc configuration. -- Converted to KEY KNIFE System. -- 125 HP Drive Motor. -- Includes existing Spare Parts. -- New Primer & Paint.
Equipment Location:PACIFIC NORTHWEST
Bill Christoffersen
800-374-5009 ext:365
ADVANCED PROCESSES Disc Pelletizer complete with the following components and features: -- 14 Ft. Diameter Disc. Disc and contact surfaces are comprised of Stainless Steel. -- Base 8’5” x 9’3” x 9’8” High. Base and frame are carbon steel. -- Hydraulic Lift. -- MAIN DRIVES:Disc Gearbox: SEW-EURODRIVE INC., Type: K187DRE225M4/C, Output: 12 RPM, Torque: 308,865 Lb-in.Disc Motor: SEW-EURODRIVE INC., Type: K187DRE225M4/C, 60 HP, 460V, 1780 RPM.Scraper Gearbox: SEW-EURODRIVE INC., KA77BDRE100LC4/C, Output: 34 RPM, Torque: 9115 Lb-in.Scraper Motor: SEW-EURODRIVE INC., KA77BDRE100LC4/C, 5 HP, 460V, 1750 RPM. -- This equipment is utilized for manufacturing bead shaped pellets, usually for products like fertilizer. Material rolls on the spinning disc to agglomerate and to further harden. Material can be built-up or conditioned on this machine. Once the proper size diameter is achieved, those larger beads roll off at the top of the disc and are conveyed away. The disc speed is variable with the scraper turning in the opposite direction. The scraper keeps any build-up from forming on the disc. The disc speed and disc angle are variable to control the target pellet size.
Equipment Location:MTN/CENTRAL CDN, AL
EX-FACTORY INC.
704-841-2001
2011 Bandit 3680T Horizontal Track Grinder - 1050 horsepower CAT C27 engine - Excellent condition
Equipment Location:Largo, FL
Apollo Equipment
503-585-1442
Wood Drying System complete with the following major components: -- 12 Ft. x 48 Ft. AEROGLIDE Triple-Pass Rotary Drum Dryer. -- Trunnion Bases with Wheels. -- Drum Drive with Drum surround Sprocket arrangement. -- Dryer Main Fan. -- 40 MM BTU Biomass Burner with fuel Feed System, Burner Fans, Fuel Induction Fan. -- Main Cyclone material separator followed by Twin Multi-clone. -- Cyclone Airlocks. -- Professional rigging and loading is available. -- NOTE: No controls.
Equipment Location:SOUTHEAST
Bill Christoffersen
800-374-5009 ext:365
AIROFLEX "HydroFlex" Model 37.5 Trailer Dumper with 38 FT x 10 FT deck. -- Hydraulic power unit. -- 50 Ton capacity, full tilt. -- Stationary Backstop, no pit required. -- Ready to load... save removal costs. -- This unit was previously tipping "hog fuel" wood trailers.
Equipment Location:PACIFIC NORTHWEST
Bill Christoffersen
800-374-5009 ext:365
AIR-O-FLEX Full Truck and Trailer (also B-Train) Dumper complete with the following features: -- 100 Ft. Tilting Deck to handle full truck and trailer or B-train and tractor. -- Full tipping angle. Great for wood chips, shavings or sawdust. -- Drive-Thru Style for rapid unloading. -- Material Discharge Conveyor. -- Hydraulic Power Pack. -- Steel Approach Ramp. -- Installation Drawing. -- Partially dismantled. Professional rigging and loading is available. Shipping will require two trucks.
Equipment Location:WESTERN CDN
Bill Christoffersen
800-374-5009 ext:365
2012 Peterson 7900EL Chipper - CAT C32 Tier 2 Engine - 1,125 Horsepower - 1,978 Hours - 5th Wheel Hitch - Extras - Very Good Condition
Equipment Location:Largo, FL
Apollo Equipment
503-585-1442
75 HP Motor Swinging Hammers Infeed Hopper
Equipment Location:NY
Carolina Machinery Sales, Inc
704-288-1904
American Screener Victory Trommel Screen - 39 horsepower Yanmar engine - Excellent condition.
Equipment Location:Largo, FL
Apollo Equipment
503-585-1442
Amerimulch Mini-Mite Colorizer - Electric 3-Phase Engine - 10 Horsepower - 50 to 80 yards/hr - 5 cubic yard hopper - Very Good Condition
Equipment Location:Largo, FL
Apollo Equipment
503-585-1442