You Have Selected

 
 
  • Used
  • New
 
  •  
 
  •  
 
  •  
 

 
219 Results Found for Pallet Viewing 1 - 20 of 219 results
RECENTLY ADDED
STANDARD LISTINGS
4' x 8' 2600 LB Advance Lifts Scissor Lift with 5HP Hydraulic Pack and Hand Control
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Location: South East Baker Bang Resaw Compact Design 4 Cuts Per Pass
Equipment Location:Blowing Rock, NC
Carolina Used Machinery
828-773-2204
BAKER BANG SAW WITH 2 40HP MOTORS, MAKES 4 CUTS AT ONCE
Equipment Location:Yuma, TN
LPS Equipment & Acquisition Co.
731-986-4351

Baker BCH-O Chamfer

Call for Price
Baker Chamfer Serial#96-010 Model BCH-O
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351

1999 Baker BCH-O Chamfer

Call for Price
The seller has confirmed that this Baker chamfer machine is in good working/running condition. It is ready to load.
Equipment Location:PA
Carolina Machinery Sales, Inc
704-288-1904

Baker A Band Resaw

Call for Price
Band Saw. This machine is a Baker A resaw with return. Line shaft ready. Item #00634
Equipment Location:Sturgeon Lake, MN
L & L Sales
218-372-4232
Machine Number: 1298 Machine Type: Deduster Manufacturer: Baker Model #: Deduster Year: 1991 Location: Great Lakes Baker Deduster Needs Pulley
Equipment Location:Blowing Rock, NC
Carolina Used Machinery
828-773-2204

Baker Deduster

Call for Price
Deduster. This machine is a Baker Deduster. 480 volt. Item #00688
Equipment Location:Sturgeon Lake, MN
L & L Sales
218-372-4232
Machine Number: 1297 Machine Type: Pallet Notcher Manufacturer: Baker Model #: Double Notcher Year: 1994 Location: Great Lakes Baker Double Notcher 1994 Feed Thru W/ Blower Hopper Feed Insert Tooling 2 30HP Motors
Equipment Location:Mid West
Mike Stuck
828-773-2204
Machine Number: 1643 Machine Type: Resaw Manufacturer: Baker Model #: Model A Location: Mid West Baker Model A Resaw Reconditioned Variable Speed Feed Serial# 94-969
Equipment Location:Mid West
Keith Comeau
704-929-9122

Baker Model A Band Resaw

Call for Price
Baker A Resaw Recrowned wheels, new belt, no return
Equipment Location:West Plains, MO
Global Wood Equipment
417-256-8131

Baker Model C Band Resaw

Call for Price
Baker Model C Single Head Resaw with return. Recrowned the wheels, new belts, and ready to run.
Equipment Location:West Plains, MO
Global Wood Equipment
417-256-8131
Single head Will take up to 9" in width Return belt 3 phase motor They have run 8' cant through and it will take longer but they did not have enough rollers The price of a rebuilt one from Baker is $11,000 and it is backordered...so bring a trailer and pick this one up today! The seller has confirmed that this Baker BBR-O resaw is in good working/running condition. It has had little use and it still has the paint on the guards.
Equipment Location:IL
Carolina Machinery Sales, Inc
704-288-1904

Baker Products Chop Saw

Call for Price
Chop Saw. This machine is a Baker chop saw. Item #C333
Equipment Location:MI
L & L Sales
218-372-4232
Baker Cutup Line – 4 Saws, with infeed deck outfeed rolls and controls. Excellent shape. Can be seen running.
Equipment Location:Farmington, IL
Sawmill Hydraulics, Inc.
309-245-2448
Product No. 4018 Double Head Insert Tooling Waterfall Feed 20HP 3Ph Cleaned And Checked PRICE: $17900 Machine Type: Pallet Notcher Manufacturer: Bob Hanna Model: BH91 Year: Machine Location: Mid West
Equipment Location:Midwest
Keith Comeau
704-929-9122
Pallet kiln Set up to Heat Treat pallets as well Rarely used and when it was, it mostly dried white pine and yellow pine Holds approximately 20,000 bd/ft Unit has been out of service since late 2016 The seller has confirmed that this Bold Designs Pallet kiln is in great working/running condition. It is ready to be put into production!
Equipment Location:NC
Carolina Machinery Sales, Inc
704-288-1904

Brewco Chop Saw

$48,800
Brewco cant cut up system w/ infeed deck, unscrambler, single cut off saw w/ infeed rollcase and indexible stop outfeed rollcase $48,800 OBO Call Jackie Kittrell 931-698-3342
Equipment Location:Spring Hill, TN
Kittrell Sawmill Brokers and Appraisers
931-797-6284
PENDING
Machine Number: 629 Machine Type: Resaw Manufacturer: Brewco Model #: Big Band Location: South East Brewco 4 Head Resaw Four Head Big Band
Equipment Location:Blowing Rock, NC
Carolina Used Machinery
828-773-2204
PRICE DROP, MUST GO! New linear bearings and rails on the floating guides All wheels have been re-crowned New micro air valves on the tension bags and the geight on the heads All of the air regulators have been replaced Size of saw: 20' x 4" x 2" Largest diameter cut should be 8" 4' x 16' off-bearer belt 6" wide return belt the length of the saw 4' x 8' infeed belt with horizontal in feed chains Motor size: (4) 40HP Hydraulic power pack (2) 5HP hydrualic pack's New sliding guide rails Electrical control panel with all the motor controls Will include: Brewco setter and Cook's sharpener
Equipment Location:IA
Carolina Machinery Sales, Inc
704-288-1904