• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
51 Results Found for Panel Saw Viewing 1 - 20 of 51 results
RECENTLY ADDED
STANDARD LISTINGS
3-axis CNC controlled Rip fence to 1300mm Automatic lubrication 3200mm table length 750mm table extension Eye level control panel Miter fence w/ digital display Stored indoors The owner has confirmed that this Altendorf F-45 Posit is in good runnin/working condition and is ready to load
Equipment Location:GA
Carolina Machinery Sales, Inc
704-288-1904
GABBIANI Class/PCT 3800 Rear Load Panel Saw: Capacity & Specifications: 149" (3,800 mm) Overall cutting length, 3-7/8" (100 mm) max. cutting height; 21.5 HP main motor, 3.6 HP scoring motor, 15-3/4" dia. - 4,500 RPM main & 6-1/4" dia. - 7,200 RPM scoring blade, w/pneumatic saw blade "quick change" system. -- Saw carriage travel speed from 0 - 360 FPM, 360 FPM constant return; powered by SIEMENS AC brushless motor. -- Back fence with (6) material clamps, fence/pusher speed from 0 - 165 FPM, return at 165 FPM; powered by SIEMENS AC brushless motor on rack & pinion system; pusher retracts 177" behind cutting line. -- Alternate pressure beam for final trim cut, pneumatic side alignment. -- This Class/PCT has a 4-Post electronically controlled screw-type lift table, stacking height 27" (685 mm); max. board size of 73" x 145", powered roller conveyor bed, can be loaded from either side, automatically separates & counts panels for book to be cut. -- SIEMENS "S5-100 U" Controller with: 14" Color monitor, 486DX/33 PC, 120 MB HD, stores up to (1,000) programs; ASCII keyboard for data entry. -- 3-1/2" Floppy disk drive for data transfer, (2) "RS-232" port capability for down loading from the office is possible. -- Complete with: (3) Air float tables (two in ripping area are 59" x 19-1/2" and one in crosscut area is 118" x 19-1/2").
Equipment Location:MIDWEST
Jim Reedy
800-374-5009 ext:455
GIBEN SMART ST Manual Panel Saw with 126" (3,200 mm) Overall cutting length, 2.95" (75 mm) max. blade projection, 7.5 HP main & 1.5 HP scoring motor. -- Features: 3,800 RPM main saw blade & - 6,000 RPM scoring blade with external adjustment. -- Saw carriage travel speed 66 FPM (20 MPM) fast & 1.3 FPM (0.4 MPM) slow, return 66 FPM (20 MPM); (2) Mechanical stops for rip cuts, (2) mechanical stops for cross cuts. -- Complete with: (3) Rear support tables: (1) is 79" x 20" & (2) are 79" x 12"; Pressure beam sections allows for continuous clamping over the full length of the beam. -- Includes: (3) Front support tables: (1) is 79" x 20" & (2) are 79" x 12", front & rear safety bars.
Equipment Location:GREAT PLAINS
Jim Reedy
800-374-5009 ext:455
GIBEN SMART 75 SP CNC Front Load Panel Saw129" (3,300 mm) Overall cutting length, 2.95" (75 mm) max. blade projection.Specification & Features: -- 15 HP (11 kW) Main & 1.5 HP (1.1 kW) scoring motor, 3,800 RPM main saw blade & 6,000 RPM scoring blade with external adjustment. -- Saw carriage forward travel speed 16 - 131 FPM (5 - 40 MPM), return speed 131 FPM (40 MPM); powered by AC brushless motor with inverter. -- Equipped with: Programmable pusher fence with (6) material clamps that open to 2.55" (65 mm); pusher fence forward travel speed 3 - 82 FPM (.8 - 25 MPM), return speed 131 FPM (40 MPM); pusher fence powered by AC Self-braking motor on dual rack & pinion system. -- Automatic side aligner roller behind the cut line with pneumatic locking, 2.4" - 48" ( 60 - 1,220 mm) stroke. -- Features: "PC" front end controller with: Windows "XP" operating system, Pentium processor, 64 MB RAM, 4.8Gb hard drive, floppy & CD drives, (2) RS 232 serial ports, (1) PCI network slot, 15" SVGA color monitor."MOELLER" PLC, LCD Readout display & standard 102 key standard keyboard mounted on movable pendant for manual, semi-automatic, or fully automatic cycle control; G 57 includes real-time graphic display with on-board pattern planner software. -- Rear of machine with (8) in-line nylon profile rail tracks; Pressure beam w/recessed sections allows for continuous clamping over the full length of the beam including the last trim cut. -- Complete with: Safety trip bar, safety flaps at cut-line, protection fence around rear of saw,(1) Air floatation tables 79" x 20" (2,000 x 510 mm), (3) Air floatation tables 51" x 20" (1,300 x 510 mm).
Equipment Location:GREAT PLAINS
Jim Reedy
800-374-5009 ext:455
GIBEN SMART 90 SP CNC Front Load Panel SawSpecifications & Features: -- 149" (3,800 mm) Overall cutting length, 3-1/2" (90 mm) max. blade projection, 15 HP (11 kW) main & 1.5 HP (1.1 kW) scoring motor, 3,800 RPM main saw blade & 6,000 RPM scoring blade with external adjustment. -- Saw carriage forward travel speed 16 - 328 FPM, return speed 328 FPM (100 MPM); powered by AC brushless motor with inverter. -- Complete with: Programmable pusher fence with (7) material clamps that open to 2.55" (65 mm); pusher fence forward travel speed 1.0 - 82 FPM (1 - 25 MPM), return speed 196 FPM (60 MPM); pusher fence powered by AC Self-braking motor on dual rack & pinion system. -- Automatic side aligner roller behind the cut line with pneumatic locking, 2.4" - 47-1/4" ( 60 - 1,200 mm) stroke. -- The SMART 75 SP is equipped with: -- "PC" Front end controller with: Windows "XP" operating system, Pentium 300 MHz processor, 64 MB RAM, 4.8Gb hard drive, floppy & CD drives, (2) RS 232 serial ports, MOELLER PLC, (1) PCI network slot. -- 15" SVGA color monitor, LCD Readout display & standard 102 key standard keyboard mounted on movable pendant for manual, semi-automatic, or fully automatic cycle control; G 57 includes real-time graphic display with on-board pattern planner software. -- Rear of machine with (9) in-line nylon profile rail tracks; pressure beam w/recessed sections allows for continuous clamping over the full length of the beam including the last trim cut. -- Includes: -- Safety trip bar, safety flaps at cut-line, protection fence around rear of saw, (1) Air floatation tables 79" x 20" (2,000 x 510 mm), (3) Air floatation table 51" x 20" (1,300 x 510 mm).
Equipment Location:MIDWEST
Jim Reedy
800-374-5009 ext:455
GIBEN SMART 105 SPT/3800 REAR LOAD, AUTOMATIC PANEL SAW: -- Specifications:149.6" (3,800 mm) Overall cutting length; 4.1" (105 mm) max. blade projection.20 HP (15 kW) main saw motor - 3,800 RPM, 2 HP (1.5 kW) scoring motor - 6,000 RPM with external adjustment. -- Saw carriage:Forward travel speed 16 - 262 FPM (5- 80 MPM), return speed 262 FPM (80 MPM);Saw carriage powered by AC brushless motor with inverter. -- Pusher fence:Forward speed 3 - 197 FPM (1 - 60 MPM), return speed 197 FPM (60 MPM);(8) Material gripper clamps that open to 4.5" (115 mm);Pusher fence powered by AC Self-braking motor on dual rack & pinion system. -- Operator & Machine Control: "PC" front end controller with: Giben "G-Vision + Windows "XP" operating system.15" Flat Screen Color monitor, 1.44MB floppy & CD drives, (2) RS 232 serial ports, (1) PCI network slot.PC, keyboard & mouse mounted on movable pendant;G-Vision software includes real-time graphic display with on-board pattern planner software -- Front of machine:Automatic side aligning device to accurately position book of panels against the right angle fence prior to crosscutting. 2.2" - 49.2" (55 - 1,250 mm) stroke. -- Rear of Machine:(2) Lateral aligners to accurately position book of panels on rear saw table prior to cutting;Modular roller rear machine table with roller track modules, -- Rear Load System:Automatic rear loading lift table; 149.6" (3,800 mm) x 62.9" (1,600 mm) max panel size;25.6" (650 mm) Max. bunk height without a pit or risers, 28.9" (735 mm) max. bunk height with pit or risers ; 10,000 Lbs (4,500 kG) cap. with 4 HP (3 kW) motor for raise-and-lower for automatic book height adjustment, 2.3 FPM (0.7 MPM) positioning speed. -- Complete with:(1) Air floatation table 79" x 20" (2,000 x 510 mm), (3) Air floatation tables 51" x 20" (1300 x 510 mm);In-feed conveyor with fork cut-outs for loading material from the rear; Safety trip bar; Safety flaps at cut-line; Protection fence around rear of saw. -- Actual model is GIBEN SMART 105 SPT/3800.
Equipment Location:SOUTHEAST
Bob Bullin
800-374-5009 ext:346
GIBEN ICON 1 80 SP FRONT LOAD, AUTOMATIC PANEL SAW: -- Specifications: 149.6" (3,800 mm) Overall cutting length, 151.4" (3,850 mm) pusher stroke; 3.2" (80 mm) max. saw blade projection, 12 HP (9 KW) main saw motor. -- Saw Carriage:Variable saw carriage speed from 0 - 525 FPM (0 - 160 MPM), return speed 525 FPM (160 MPM);Rack & pinion drive, driven by AC brushless Servo motors. -- Pusher Fence:Electronically controlled overhead program fence with (6) pneumatic gripper clamps.Forward pusher speed 3.2 - 262 FPM (1 - 80 MPM), return speed 62 FPM (80 MPM);Rack & pinion drive, driven by AC brushless Servo motors. -- Operator & Machine Control:PC front end with Giben "G-Vision" + "Windows" Multitasking operating system with easy programming of very complex cutting patterns.15" Flat screen monitor displays REAL-TIME graphics of cutting dimensions & patterns, program cutting list, manual cuts, diagnostic & on-line help.Data input by adjustable key pad pendant, standard industrial keyboard & mouse & CD-ROM drive; direct downloading from office PC is possible.Giben "G-Vision" guarantees fully automatic management of cutting patterns by optimizing all machine movements (pressure beam, saw carriage and side aligner pusher positioning, etc.).The numerical control adjusts the optimum saw blade projection for the stack of panels being cut and sets the most appropriate cutting speed, in relation to the stack itself, and when necessary to the width of trim cut too. -- Rear of machine:(9) Rear support rails with 80 mm dia roller modules; rear of machine enclosed for safety. -- Front of machine:(2) Independent automatic side/crosscut aligning device with 2.75" - 87" (70 - 2,200 mm) stroke.90" (2,300 mm) Long crosscut fence (front-to-back); (4) Front mounted air floatation tables 20" x 78" (510 x 2,000 mm). -- Complete with: "Quick Change" saw blade system; "REMOTE" electronic scoring adjustment. -- Actual Model is GIBEN ICON 1 80 SPNOTE: Missing timing belt for main and score saw arbors.
Equipment Location:SOUTHEAST
Bob Bullin
800-374-5009 ext:346
GIBEN MATIC SP 75 FRONT LOAD, AUTOMATIC PANEL SAW: -- Specifications: 129.9" (3,300 mm) Overall cutting length, 118.1" (3,000 mm) pusher stroke; 3" (75 mm) max. saw blade projection, 15 HP (11 KW) main saw motor 2 HP ( 1.5 kW) scoring saw motor. -- Saw Carriage:Variable saw carriage forward speed 16 - 262 FPM (5 - 80 MPM), return speed 262 FPM (80 MPM);Rack & pinion drive, driven by AC brushless Servo motors. -- Pusher Fence:Electronically controlled overhead program fence with (6) pneumatic gripper clamps, max clamp opening 2.35" (60 mm).Variable forward pusher speed 2.5 - 262 FPM (0.8 - 80 MPM), return speed 262 FPM (80 MPM);Pusher driven on round bar-ways by AC brushless Servo motors. -- Operator & Machine Control:PC front end with Giben "G-Vision" + Windows "XP" operating system with multitasking & easy programming of very complex cutting patterns.15" Flat screen monitor displays REAL-TIME graphics of cutting dimensions & patterns, program cutting list, manual cuts, diagnostic & on-line help.Data input by adjustable key pad pendant, standard industrial keyboard & mouse & CD-ROM drive; direct downloading from office PC is possible.Giben "G-Vision" guarantees fully automatic management of cutting patterns by optimizing all machine movements (pressure beam, saw carriage and side aligner pusher positioning, etc.).The numerical control adjusts the optimum saw blade projection for the stack of panels being cut and sets the most appropriate cutting speed, in relation to the stack itself, and when necessary to the width of trim cut too. -- Rear of machine:(9) Rear support rails with 80 mm dia roller modules; rear of machine enclosed for safety. -- Front of machine:Automatic side/crosscut aligning device with 2.75" - 49" (70 - 1,225 mm) stroke.90" (2,300 mm) Long crosscut fence (front-to-back); (4) Front mounted air floatation tables 20" x 78" (510 x 2,000 mm). -- Complete with: "Quick Change" saw blade system. -- Options Include:230/3/60 transformer -- Actual Model is GIBEN MATIC SP 75
Equipment Location:SOUTH
Bob Bullin
800-374-5009 ext:346
GIBEN PRISMA 3000 H115 SP FRONT LOAD, AUTOMATIC PANEL SAW -- Specifications: 149.6" (3,800 mm) Overall cutting length, 161.4" (4,100 mm) pusher stroke; 4.5" (115 mm) max. saw blade projection, 25 HP (18.6 KW) main & 3.5 HP (2.6 KW) scoring motor. -- Saw Carriage:Variable saw carriage speed from 0 - 558 FPM (0 - 170 MPM), return speed 558 FPM (170 MPM);Rack & pinion drive, driven by AC brushless Servo motors. -- Pusher Fence:Electronically controlled overhead program fence with (6) floating pneumatic gripper clamps (open up to 4.6" / 117 mm).Forward speed of 3.2 - 196.8 FPM (1 - 60 MPM) & return speed of 196,8 FPM (60 MPM);Rack & pinion drive, driven by AC brushless Servo motors. -- Operator & Machine Control:PC front end with Giben "G-Drive RT" + WINDOWS "NT" operating system with easy programming of very complex cutting patterns.15" Flat screen monitor displays REAL-TIME graphics of cutting dimensions & patterns, program cutting list, manual cuts, diagnostic & on-line help.Data input by adjustable key pad pendant, standard industrial keyboard & mouse & CD-ROM drive; direct downloading from office PC is possible.Giben "G-Drive RT" guarantees fully automatic management of cutting patterns by optimizing all machine movements (pressure beam, saw carriage and side aligner pusher positioning, etc.).The numerical control adjusts the optimum saw blade projection for the stack of panels being cut and sets the most appropriate cutting speed, in relation to the stack itself, and when necessary to the width of trim cut too. -- Rear of machine:(9) Rear support rails with 80 mm dia roller modules; rear of machine enclosed for safety. -- Front of machine:(2) Independent automatic side/crosscut aligning device with 2.75" - 87" (70 - 2,200 mm) stroke.90" (2,300 mm) Long crosscut fence (front-to-back); (4) Front mounted air floatation tables 20" x 78" (510 x 2,000 mm). -- Complete with: "Quick Change" saw blade system; "REMOTE" electronic scoring adjustment. -- Options Include: Label printer software, stand and printer. -- Actual Model is GIBEN PRISMA 3000 H115 SP.
Equipment Location:MID ATLANTIC
Bob Bullin
800-374-5009 ext:346
GIBEN TREND Front Load Panel SawSpecifications & features: 129" (3,300 mm) Overall cutting length, 3.54" (90 mm) max. blade projection, 12 HP main & 1.8 HP scoring motor, 13.9" dia. - 3,800 RPM main saw blade & 4.9" dia. - 6,000 RPM scoring blade with external adjustment. -- Saw carriage travel speed 13.1 - 131.2 FPM (4 - 40 MPM) by hydraulic speed variator, 131.2 FPM (40 MPM) return. -- Equipped with: Programmable pusher fence with (5) material clamps, ea. with (2) clamping fingers, pusher fence forward travel speed 66 FPM (20 MPM) fast & 1.3 FPM (0.4 MPM) slow, return 66 FPM (20 MPM) powered by AC self-braking motor on dual rack & pinion system; 132" overall stroke of pusher fence. -- Features: "MCX" Controller with: LCD Readout display & alphanumeric keypad mounted on movable pendant for manual, semi-automatic, or fully automatic cycle control; capacity to store & retrieve (2,400) lines of programming ea. repeatable (99) times. -- Complete with: Rear table with in-line nylon profile rail tracks; pressure beam w/recessed sections allows for continuous clamping over the full length of the beam including the last trim cut. -- Includes: (3) Air floatation tables, (2) in ripping area (51" x 20") and (1) in crosscut area (79" x 20").
Equipment Location:NORTHWEST
Jim Reedy
800-374-5009 ext:455
HENDRICK USA-50 SINUC CNC Cross Cut Panel Saw -- Equipped with: SINUC 3000 Cut Controller; Standard Cut Width: 53"; full 3" cut height for stacking material. -- 14" Main blade (3,500 RPM); 6" scoring blade (5,000 RPM); 10 HP TEFC main saw blade motor. -- Saw carriage traverse speeds are variable by inverter; uses unique dual THK linear rectangular ways for added rigidity and accuracy at the cut line. -- Complete with: Automatic Lubrication System on THK rail for pusher drive; full-length pneumatic hold-down bar for accuracy and increased dust collection efficiency. -- Includes: (2) Adjustable Flip Stops; (3) 4" ports for max. dust collection; safety shield; safety bar on both front and rear of the hold-down bar; E-Stop Button on each support table; push button for cycle start; saw cover with air cylinder lock with time delay; dual channel safety relay. -- PC Controller accepts 3rd party saw optimization and cut programs. -- Input Table: 174” x 54” x 51” w/ Fence; Output Table: 33 ½” x 94 ½” x 38”. -- Also includes: Spare guide rails new in crate ($ 15,000 value).
Equipment Location:WEST COAST
Jim Reedy
800-374-5009 ext:455
HENDRICK PATRIOT SRP 3200 Panel Saw, Front Load and Computer Controlled:126" (3,200 mm) Cutting length & pull back cap.; 10 HP arbor motor for main & scoring saw; 3" saw blade projection.Speed & Feed: -- Variable saw carriage travel speed from 0 - 130 FPM (0 - 40 MPM), return carriage speed of 130 FPM (40 MPM). -- Programmable pusher fence with (6) material grippers; 0 - 130 FPM (0 - 40 MPM) forward positioning speed, 130 FPM (40 MPM) return speed. -- Pusher fence travels on rack & pinion drive system.Machine & Operator Control: -- PC Front-end machine control, Windows "XP Professional" Operating system & built-in processor with panel optimizer. -- Storage cap. of (75) different programs, each with up to (25) lines (cut sizes) and repeatable (99) times. Equipped with: -- Automatic crosscut side alignment device. -- Last cut pneumatic holddown pistons. -- (3) Front air floatation tables and safety fencing around all (3) sides of panel support saw table.
Equipment Location:MID ATLANTIC
Jim Reedy
800-374-5009 ext:455
HENDRICK CH4 3200 PL FRONT LOAD, AUTOMATIC PANEL SAW: -- Specifications:126" (3,200 mm) Rip cutting capacity; 126" crosscut pullback; 4" (100 mm) max. depth of cut; 18 HP (13.4 kW) Main saw motor, 16" (406 mm) dia. main blade -- Saw Carriage:Saw carriage forward (cutting) travel speed 0 - 120 FPM (0 - 36.5 MPM), constant return of 225 FPM (68.5 MPM). -- Pusher Fence:Electronically controlled overhead program fence, rack & pinion driven on both sides, Forward speed 100 FPM (30.4 MPM), return speed 100 FPM (30.4 MPM);Solid back table with solid pusher configuration. -- Operator & Machine control:12" HMI" Touchscreen monitor possible of repeating up to 10-sets of 5-different part sizes each & repeatable up to 99 times for each size. The control is mounted on a ergonomic rotating housing. -- Complete with:(2) Air floatation tables; crosscut right angle fence; Manual adjustment side pressure device for crosscutting strips mounted to pressure beam,Safety stop bar & segmented safety curtain prevents direct access to saw blades & cutting line,Individual pressure adjustments & saw blade load armature. -- Options Include:Variable speed RPM saw blade to optimize cutting of low melt materials -- Actual Model is HENDRICK CH4 3200 PL
Equipment Location:NORTHEAST
Bob Bullin
800-374-5009 ext:346
HOLZ-HER CUT 70 CNC Front Load Panel Saw122" (3,100 mm) Max. rip cut cap., 122"(3,100 mm) max. pull back pusher stroke.Specifications & Features: -- 15 HP (11 kW) Main & 1.5 HP (1 kW) scoring motor, 2-3/4" cutting height with 82 mm max. saw blade projection. -- Saw carriage feed speed from 3 - 230 FPM (1 - 70 MPM), return speed of 230 FPM (70 MPM), automatic cutting length limiter adjusts the cutting length at the end of the workpiece, automatic saw carriage lubrication. -- Programmable rear fence with (5) material grippers, rack & pinion movement on both sides to assure the pusher remains parallel; 82 FPM (25 MPM) forward positioning speed, and 230 FPM (70 MPM) return positioned speed. Operator & Machine Control: -- PC front end controller, 15" TFT display with: Unlimited program storage via floppy disk, keypad for data entry, USB & RS-232 serial port, CD ROM & disk drive for additional storage of programs. -- Diagnostic for errors or machine malfunction by means of an error signal code, incremental or absolute programming in mm or inches. Complete with: -- Crosscut side aligner and roller rear support tables; "Quick-Change" saw blade system and automatic saw blade height adjustment. -- (3) Air support tables; (2) movable air table in rip cut area & (1) fixed table in the crosscut area, 78" x 24" (1,981 x 609 mm) each. Includes: (2) Sets of tooling, original manuals.
Equipment Location:NORTHEAST
Jim Reedy
800-374-5009 ext:455
HOLZMA HPL-22/38/16 Rear Load Panel Saw -- Specifications: 149" (3,800 mm) Cutting length and between cutting line & program fence; 5.3" (135 mm) max. saw blade projection; 40 HP (30 kW) main & 3 HP (2.2 kW) scoring motor. -- Variable saw carriage travel speed from 16 - 328 FPM (5 - 100 MPM), constant return of 328 FPM (100 MPM); main blade 500 mm dia. & scoring blade 200 mm diameter. -- Electronically controlled overhead program fence, rack & pinion driven on both sides by AC Servo drive, forward speed from 0 - 230 FPM (0 - 70 MPM), return speed of 230 FPM (70 MPM); includes (7) clamps that open up to 5.3" / 135 mm. -- Features: HOLZMA "CADMATIC" 2.2 version control with: 14" Color monitor (displays cutting dimensions & patterns in moving colored graphics), (500) cutting dimension memory, extended to 1 MB (99 times repeatable). -- Data input by keyboard or (2) 3-1/2" floppy disk drives or RS-232 downloading from office PC, control panel w/CADMATIC housed in control cabinet mounted on double swiveling arm for ergonomic positioning by the operator. -- Complete with: Combi-rollers rear machine table with profile rails, rollers spaced at 50 mm centers; front with (1) air flotation tables 110" x 26" (2,810 x 650 mm) & (2) air flotation tables 85" x 26" (2,160 x 650 mm). -- Angular fence, side pressure device for crosscutting on pressure beam & (2) aligning devices on program fence. -- Includes: Automatic scoring saw adjustment from the outside during operation, patented "Quick Saw Changing System" for main & scoring blade. -- 7-Ton Automatic electro-hydraulic 4-column rear load Lift Table, max. panel size when loading from the rear is 150" x 63" (3,800 mm x 1,600 mm). -- 26.7" (680 mm) Max stack height. -- Right and left infeed pre-staging roller driven conveyors.
Equipment Location:MID ATLANTIC
Jim Reedy
800-374-5009 ext:455
HOLZMA HPL 23-38/16 REAR LOAD, AUTOMATIC PANEL SAW: -- Specifications:149.6" (3,800 mm) Cutting length, 5.9" (150 mm) max. main blade projection,40 HP (30 kW) Main & 3 HP (2.2 kW) scoring motor. -- Saw Carriage:Variable saw carriage with AC frequency drive, travel speed from 0 - 328 FPM (0 - 100 MPM), constant return of 328 FPM (100 MPM). -- Pusher Fence:Electronically controlled, AC frequency drive overhead program fence with rack & pinion driven on both sides,Forward speed from 0 - 230 FPM (0 - 70 MPM), return speed of 230 FPM (70 MPM). (7) Gripper clamps which open up to 5.9" (150 mm); 1st (2) clamps with (2) fingers and the others with (1) finger;(4) Trimming rakes for thin strips/scrap material are attached at the clamps; -- Operator & Machine Control:HOLZMA "CADMATIC 3.0 - REV. 009-0X.X" Controller with: Windows/NT4 operating system, displays cutting dimensions & patterns in moving colored graphics in real-time, 15" VGA Color monitor; 1.4 GB Hard Drive, data input by keyboard or 1.44Mb floppy disk drive;Features (4) serial interfaces, (1) parallel & (1) Ethernet interface, as well as a comprehensive error diagnostic system.Control panel w/CADMATIC housed in control cabinet mounted on double swiveling arm for ergonomic positioning by the operator;Possibility to setup for online download from office PC & label printing at the saw. -- Rear of machine:"Combi-rollers" with profile rails at 50 mm centers; (2) integrated front alignment units & cross-alignment before cutting to prevent offset panels within the same book. -- Front of Machine:Angular square fence in cross-cut section; 2 side pressure devices for cross-cutting are electronically & automatically controlled through the CADmatic & based on the material being processed. (1) air floatation table 111" x 26" (282 x 660 mm), (2) air flotation tables 85" x 26" (2,159 x 660 mm). -- Rear Lift Table:150" x 63" (3,810 x 1,600 mm) Automatic 4-column electro-hydraulic lift table with fork cutouts;4.2" (107 mm) dia. powered rollers, 39 FPM (12 MPM) infeed/outfeed speed. 22.8" (579 mm) Max. bunk height (30.7" / 780 mm with a pit or risers), 15,000 Lbs (6,800 kG) lift capacity. -- Complete With:"Power-Loc" quick blade change system for main/scoring blades. -- Actual model is HOLZMA Optimat HPL 23/X/33/38/16 PROLINE".
Equipment Location:SOUTH
Bob Bullin
800-374-5009 ext:346
HOLZMA HPL 550 REAR LOAD, AUTOMATIC PANEL SAW: -- Specifications: 169.2" (4,300 mm) Cutting length & pull-back, 5.9" (150 mm) max. main blade projection. 58 HP (43 kW) Main & 3 HP (2.2 kW) scoring motor. -- Saw carriage: Variable speed from 16 - 492 FPM (5 - 150 MPM), constant return of 492 FPM (150 MPM);Carriage is electronically & automatically controlled through the CADmatic according to the material/program being processed. -- Pusher fence;Rack & pinion drive on both sides, forward speed 82 - 262 FPM (25 - 80 MPM), return speed 262 FPM (80 MPM).(9) Material clamps which open up to 6" (153 mm); first (2) clamps with two fingers and the others with one finger,(4) Trimming rakes for thin strips/scrap removal are attached at the clamps. -- Operator & Machine Control:HOLZMA "Power Control 22" IPC multi-tasking controller with "Windows NT" + "CADmatic 4.0 PROFESSIONAL" operating system;17" TFT Flat-Screen display/monitor with real-time moving graphics (displays cutting dimensions & error diagnostic); virtually unlimited cutting dimension memory.Standard industrial keyboard; CD ROM & 1.44MB floppy drives; possible direct downloading from office PC through RS 232 or USB connection. -- Machine Features:Angular cross-cut fence; side pressure device for cross-cutting with front & rear forks electronically & automatically controlled through the CADmatic according to the material/program being processed;Min. side aligning dimension 0" (0 mm), max. side aligning dimension 169.2" (4,300 mm)."Power-Loc" quick blade change system for main/scoring blades. -- Rear of machine: Profile rails & "Combi-rollers" at 50 mm centers; (2) integrated front & cross-aligning units before cutting to prevent off-set panels within the same book. -- Front of machine: (4) air flotation tables 85" x 25.5" (2,160 x 650 mm) with (1) central blower unit. -- Rear Lift Table:7-Ton, 4-column electro-hydraulic rear lift table with fork cut-outs; 169.2" x 69.2" (4,300 x 1,600 mm) capacity; 4.2" dia powered rollers, 39 FPM (12 MPM) infeed/outfeed speed;26.7" (680 mm) max. bunk height from floor level; 34.6" (880 mm) max. bunk height with a pit or risers; -- Options Include:Side loading infeed/outfeed table with fork cut-outs (LH) facing; Label Printer. -- Actual model is HOLZMA Optimat HPL 550-43/16.
Equipment Location:SOUTHEAST
Bob Bullin
800-374-5009 ext:346
HOLZMA HPP-81 CNC Front Load Panel SawSpecifications & Features: -- 3,200 mm Cutting length (126"), 85 mm (3.3") cutting height, 18 HP (13.4 kW) main and 3 HP (2.2 kW) scoring motor. -- Variable saw carriage travel speed 0 - 229 FPM (0 - 70 MPM), constant return of 229 FPM ( 70 MPM). Equipped with: -- Electronically controlled overhead program fence, rack and pinion driven on both sides, forward speed 131 FPM (40 MPM), return speed 131 FPM (40 MPM), equipped with (6) clamps which open up to 4" (102 mm). -- The HOLZMA HPP-81 has a CADMATIC control, version 2.2, with (500) cutting dimension memory with color monitor, moving graphics and numeric display. -- CAD input, floppy disk drive and direct input by keyboard or RS-232 port for possible direct downloading from PC. Complete with: -- Combi-rollers rear machine table with profile rails at 50 mm centers, front with (3) air flotation tables 24" X 86" (609 x 2,184 mm) each. Includes: Cross cut fence, side pressure device for cross cutting on pressure beam.
Equipment Location:NORTHEAST
Jim Reedy
800-374-5009 ext:455
HOLZMA HPP-81 CNC Front Load Panel SawSpecifications & Features: -- 3,200 mm Cutting length (126"), 85 mm (3.3") cutting height, 18 HP (13.4 kW) main and 3 HP (2.2 kW) scoring motor. -- Variable saw carriage travel speed 0 - 229 FPM (0 - 70 MPM), constant return of 229 FPM ( 70 MPM). Equipped with: -- Electronically controlled overhead program fence, rack and pinion driven on both sides, forward speed 131 FPM (40 MPM), return speed 131 FPM (40 MPM), equipped with (6) clamps which open up to 4" (102 mm). -- The HOLZMA HPP-81 has a CADMATIC control, version 2.2, with (500) cutting dimension memory with color monitor, moving graphics and numeric display. -- CAD input, floppy disk drive and direct input by keyboard or RS-232 port for possible direct downloading from PC. Complete with: -- Combi-rollers rear machine table with profile rails at 50 mm centers, -- Front with (3) air flotation tables 24" X 86" (609 x 2,184 mm) each. Includes: Cross cut fence, side pressure device for cross cutting on pressure beam.Note: Machine is tear down and ready to ship
Equipment Location:EASTERN CDN
Jim Reedy
800-374-5009 ext:455
HOLZMA HPP-81 CNC Front Load Panel SawSpecifications & Features: -- 3,200 mm Cutting length (126"), 85 mm (3.3") cutting height, 18 HP (13.4 kW) main and 3 HP (2.2 kW) scoring motor. -- Variable saw carriage travel speed 0 - 229 FPM (0 - 70 MPM), constant return of 229 FPM ( 70 MPM). Equipped with: -- Electronically controlled overhead program fence, rack and pinion driven on both sides, forward speed 131 FPM (40 MPM), return speed 131 FPM (40 MPM), equipped with (6) clamps which open up to 4" (102 mm). -- The HOLZMA HPP-81 has a CADMATIC control, version 2.2, with (500) cutting dimension memory with color monitor, moving graphics and numeric display. -- CAD input, floppy disk drive and direct input by keyboard or RS-232 port for possible direct downloading from PC. Complete with: -- Combi-rollers rear machine table with profile rails at 50 mm centers, front with (3) air flotation tables 24" X 86" (609 x 2,184 mm) each. Includes: Cross cut fence, side pressure device for cross cutting on pressure beam.
Equipment Location:SOUTH
Jim Reedy
800-374-5009 ext:455