• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
13 Results Found for Pellet Mill Viewing 1 - 13 of 13 results
STANDARD LISTINGS

2012 Anyang Pellet Mill

Call for Price
2012 Anyang General International Pellet Mill - Comes with 6, 8 and 10mm die, 30 HP motor - Never used (Two identical units available)
Equipment Location:Largo, FL
Apollo Equipment
503-585-1442
2010 Bio Energy Briquette Plant: Includes 2 hoppers, 2 augers, 100 HP Toshiba Motor, Schutte hammer mill, 3-stage cyclone biomass drying system, 50 HP motor, Anyang briquette press - Excellent condition.
Equipment Location:Largo, FL
Apollo Equipment
503-585-1442
These (2) units were recently taken offline. This equipment was installed new in 2006 and removed in September of 2015. All equipment was maintained and is reported to be in good running/working condition. Seller was producing about 4TPH of dense hardwood pellets per mill and running everything through the included cooling system.
Equipment Location:KS
Carolina Machinery Sales, Inc
704-288-1904
California Pellet Mill - Master Model Pellet Mill S/N 257283
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351

1990 CPM 7730 Pellet Mill

Call for Price
CPM Pellet Mill with 250 HP - 1,800 RPM Motor. This 2.5 TPH capacity unit is equipped with the following features: -- Motor Control Center and Smart Controller Soft start. -- Diameter of the die 30" (750 mm) with corresponding working width of 6" (148 mm). -- Discharge Chutes, shear pin Detectors. -- Automatic Lubrication System with 0.5 HP lubrication Pump. -- Stainless steel Feed Chutes with water spray and Control Valves. -- Fluff Force Feeder with 7.5 HP Drive and Roll-Away Frame. -- This machine has been reconditioned.NOTE: No conditioner is included.
Equipment Location:MIDWEST
Bill Christoffersen
800-374-5009 ext:365

CPM 7122 Pellet Mill

Call for Price
(2) CPM 7122 Pellet mills 250HP each Jacobson 41" Hammermill 250HP Jacobson 16" Hammermill 100HP Torit-30 Dust collector Kice Dust collection system 7.5HP (4) Screw conveyors - 10' (2) Screw conveyors - 20' (1) Screw conveyor - 30' (1) Screw conveyor - 6' (2) Airflow 9 yard hopper sanders (1) 28" Wilson Process Heater 3Million BTU Automatic Air Valve (3) PCL boards for computer (1) Burnrite 8' x 40' Drum dryer - 15HP drive motor (1) Dewan Bagger/hopper Rotarty heat sealer Impulse bag sealer 2 person unit bagging system along w/ 8 ton storage hopper (1) CPM Pellet cooler - 5' x 22' (2) Vibrator Drag chain - 35' (1) Honeyville Drag chain - 35' Rotary air lock (1) Wilson drying cyclone - 18' (1) Wilson material cyclone - 10' Self cleaning belt magnet (2) permanent magnets located in sawdust in-feed screw conveyors Vibrating cooling conveyors and hopper Feed system to silo (2) Pallet wrappers Silo - 27' x 12' Toyota Forklift New Holland skid steer - bucket and forks White Superior generator Many of the electrical components and wire needed to be reinstalled Starters are soft start for large motors
Equipment Location:MA
Carolina Machinery Sales, Inc
704-288-1904
Complete Wood Pellet Plant with a capacity of 1.5 - 4 Tons/Hr (currently 1.5 TPH). - The plant is comprised of the following major components: -- Small Feeding Hammer Mill Bin. -- SPROUT Hammer Mill with Magnet. -- JACOBSON Hammer Mill Model 2424. -- 2,000 CFM Fan system. -- 60" Dia. High Efficiency Cyclone. -- AGET Secondary Filter Receiver. -- (1) SPROUT 16" die diameter Model "501HL", V-Belt Pellet Mill. -- Stainless steel live-bottom pellet mill Twin Feeder. -- Stainless steel Belt Conveyor 14" x 25'. -- Incline 14"x 30' cleated belt conveyor. -- Vertical Pellet Cooler with Fan and Cyclone assembly. -- Bucket elevator: 7" x 4" x 30' High. -- Finished product storage bin with 15-Ton capacity and 14" x 30' inclined and cleated belt conveyor. -- ROTEX Model 42, 40" x 84" double deck screener. -- Small Rotary Screener. -- Automatic Bagging Scale system with V-type bagging conveyor and Model "BMR 100" Hot Air Bag Sealer. -- Raw sawdust surge bin with chain conveyor. -- 40' Split-casing drag-chain hammermill infeed conveyor. -- Electrical Panel. -- NOTES: This system was installed with rebuilt equipment in 2008 and operated for only (18) months. The one pellet mill is rated for 1.5 tons per hour on wood. The remainder of the plant will handle up to 4+ tons per hour. Thus, other pellet mills can be added. -- No dryer system included.
Equipment Location:MID ATLANTIC
Bill Christoffersen
800-374-5009 ext:365
Complete Wood Pellet Plant with a capacity of 1.5 - 4 Tons/Hr (currently 1.5 TPH). - The plant is comprised of the following major components: -- Small Feeding Hammer Mill Bin. -- SPROUT Hammer Mill with Magnet. -- JACOBSON Hammer Mill Model 2424. -- 2,000 CFM Fan system. -- 60" Dia. High Efficiency Cyclone. -- AGET Secondary Filter Receiver. -- (1) SPROUT 16" die diameter Model "501HL", V-Belt Pellet Mill. -- Stainless steel live-bottom pellet mill Twin Feeder. -- Stainless steel Belt Conveyor 14" x 25'. -- Incline 14"x 30' cleated belt conveyor. -- Vertical Pellet Cooler with Fan and Cyclone assembly. -- Bucket elevator: 7" x 4" x 30' High. -- Finished product storage bin with 15-Ton capacity and 14" x 30' inclined and cleated belt conveyor. -- ROTEX Model 42, 40" x 84" double deck screener. -- Small Rotary Screener. -- Automatic Bagging Scale system with V-type bagging conveyor and Model "BMR 100" Hot Air Bag Sealer. -- Raw sawdust surge bin with chain conveyor. -- 40' Split-casing drag-chain hammermill infeed conveyor. -- Electrical Panel. -- NOTES: This system was installed with rebuilt equipment in 2008 and operated for only (18) months. The one pellet mill is rated for 1.5 tons per hour on wood. The remainder of the plant will handle up to 4+ tons per hour. Thus, other pellet mills can be added. -- No dryer system included.
Equipment Location:MID ATLANTIC
Bill Christoffersen
800-374-5009 ext:365

Sprout 501-H Pellet Mill

Call for Price
SPROUT Model 501H Pellet Mill with V-Belt Drive and the following additional features and components: -- 150 HP, 1200 RPM Main Motor. -- 14-groove, 42" Sheave for narrow Die. -- Top Mounted Feeder/Conditioner. -- New Roller Shells. -- OPTIONAL ITEM: New Centri-Feeder for Wood Applications - Add $5,000. -- This machine has not yet been reconditioned. Check with the Product Manager for lead times near the time of purchase. Current lead time is 5 to 8 weeks. -- Photos shown with this listing are representative only. --
Equipment Location:MIDWEST
Bill Christoffersen
800-374-5009 ext:365
SPROUT, Model 21V-200-3, REFURBISHED Pellet Mill designed for a 21"dia. x 4" die (narrow die arrangement) (die Not included) complete with 3-Roller Assembly, a 18 x 54-SD Feeder-Conditioner and a Door-mounted Centri-Feeder (Force Feeder for wood). -- The refurbishing includes the following:• New (17) Belts.• Refurbished Main Shaft.• Rebuilt Quill.• New Roller Shell Assemblies.• New Seals & Bearings.• Stainless Steel Door-liner.• Includes Shear Pin Housing.• New 200 HP - 1200 RPM 449T frame Motor . (Canadian or USA Voltage - Your Choice)• Replaced or repaired any worn parts as needed.• Prime and paint (choice of stock color). -- Capacity for wood pellet manufacturing: approximately 2 TPH.
Equipment Location:EASTERN CDN
Bill Christoffersen
800-374-5009 ext:365
Rebuilt SPROUT Model 501-D Pellet Mill complete with the following additional items: -- 100 HP Main Drive Motor. -- New stainless steel Die for 3/8" pellets. -- New Drive Belt. -- Updated Feeder. -- Approximately 300 operating hours since rebuilt. -- Pellet Cooler with a capacity of 3 tons per hour. -- GRUNDLER Hammer Mill with 150 HP Drive Motor. -- NOTES: This model pellet mill is a animal feed type machine. Although in great condition, the pellet cooler and hammer mill have not been rebuilt.
Equipment Location:NORTHWEST
Bill Christoffersen
800-374-5009 ext:365
Wood Pellet Manufacturing Plant with a capacity of 4 to 5 TPH and the following major components; -- Rebuilt SPROUT Model 43245 Hammer Mill with 100 HP Motor having a capacity of 4 TPH. -- Pulse Jet Dust Collector with 40 HP Motor, Drive and Electrical Control Panel. -- Bucket Elevator 65'H with plastic Buckets. -- 10' Dia. x 40' High Bin with an Explosion Door Safety System and discharge Screw Unloader. -- Bucket Elevator 25' High Plastic. -- Bucket Elevator 18' High (without belt or bucket). -- Hot Air Dryer System 40' Long x 10' wide with 40 HP Fan. -- Pellet Screener. -- Rebuilt SPROUT- MATADOR Model 26LM Belt Drive Pellet Mill with 400 HP HEG Main Drive Motor and Centri-Feeder less Conditioner. -- Electrical Control panel with 400 HP Pellet Mill Starter. -- Counterflow Cooler, Model VC-83P, capacity of 10 - 12 TPH less Cyclone & Fan. -- PREMIER TECH Bagger System with a capacity of (28) bags per minute. Nearly New: This system only operated a few hours. -- BRADER AUTOMATION KUKA Model KR 40 PA Robot for stacking the above bags. -- MACH-ONE brand Control Panel. Pellet Mill Spare Parts for SPROUT Pellet Mill Model 26LM and Greasing System: -- Automatic Greasing System. -- (2) Roller Assembly. -- (3) New Dies. -- Tool Kit. -- Misc.Electric Control Panels are included.NOTE: This plant was partially installed. Some items which were to be located inside the plant are not yet installed.
Equipment Location:EASTERN CDN, AL
EX-FACTORY INC.
704-841-2001
Wood Pellet Plant with a capacity of 2 – 3 Tons per hour, a complete System with (2) V•Belt driven Pellet Mills complete system with the following major components: -- Hammer Mill system. -- 100 Ton Silos Pellet Mill Feeding System. -- (2) 150 HP x 16'' V•Belt Pellet Mill Systems with side Mixer for extra product addition. -- Counter flow Cooler system, 5 tons/Hr. with Fan & Cyclone. -- Transfer system conveyor, elevator and magnet. -- Screener assembly. -- Bagging system with Scale, Bagger, Sealer with Conveyor and Shrink rapper. -- Dust collecting system with Spark detection control. -- All electrical controls, cables and motors and motor soft starter. -- Office & cafeteria -- (1) Lot of Equipment Spare parts. -- Notes: • This Plant is complete, Plug & Play, purchased new in 2015 and ran through only about 3000 Tons.• No Drying System included.
Equipment Location:EASTERN CDN
Bill Christoffersen
800-374-5009 ext:365