• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
14 Results Found for Radial Arm Saw Viewing 1 - 14 of 14 results

Circular-Saws

Band-Saw-Blades-Wide

Wear-Parts

Tools

Chipper-Parts

Wear-Parts

Chainsaw

Mechanical-Harvesters

Marking-and-Tally
Find More Supplies
STANDARD LISTINGS

Delta 16A6 Radial Arm Saw

Call for Price
Rockwell Delta Radial Arm Saw, S/N FQ2780, Model, Model 16A6
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
DELTA 33-895X Radial Arm SawFeature: 12" Blade cap., 2HP, 3450 rpm, on-off key lock switch and overload protection, set of legs, automatic mechanical brake, blade guard with anti-kickback attachment, retractable leaf guard. -- 12" combination blade, 3 3/4" max. depth of cut, 14 3/8" crosscut, 24 1/4" rip. -- Table size 25 1/2" x 30".
Equipment Location:EASTERN CDN
EX-FACTORY INC.
704-841-2001
DELTA 16" RADIAL ARM SAW Equipped with: 16" blade; 1" dia.; 1" crosscut 23" stock; 37" max. rip; 90° 5" (127 mm) depth of cut (less leaf guard); 90° 4-3/4" (120.7mm) depth of cut (with leaf guard); 45° 2-1/2" (63.5 mm) depth of cut (less leaf guard); 45° 2-1/4" (57.2 mm) depth of cut (with leaf guard); 2-1/8" (53.9mm) dado capacity (10" dado); 0°, 45°, 90° positive bevel stops; 45°, 90° left and right positive miter stops; 3,450 RPM motor speed.
Equipment Location:EASTERN CDN
EX-FACTORY INC.
704-841-2001

Dewalt Radial Arm Saw

Call for Price
DeWalt Radial Arm Saw. 5HP, 3Phase, 220/440 Volt
Equipment Location:Yuma, TN
LPS Equipment & Acquisition Co.
731-986-4351

Dewalt Radial Arm Saw

Call for Price
DeWalt Radial Arm Saw 5HP 220/440 Volt 3Phase
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
3 to Choose from Dewalt Radial Arm Saws
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
5 HP Motor; 16" dia. blade capacity; 1" dia. saw arbor. -- 24" max. crosscut on 1" thick material; 4-1/2" max. depth of cut. -- Ready for youe custom table to be mounted. -- Complete with: Blade guard and starter.
Equipment Location:MID ATLANTIC
EX-FACTORY INC.
704-841-2001
For vertical, horizontal or compound miter cross cut angles; 5 HP Direct motor drive, 16" max. blade dia. x 1" dia. arbor. -- 4-1/2" Max. depth of cut, 1-9/16" max. dado cap. 25" max. crosscut (17-1/2" w/fence in normal position) and 31" max. ripping cap. (23-1/2" w/fence in normal position). -- Equipped for compound angles left & right. -- Complete with: Safety guard w/kickback preventer, blade return device & push button magnetic controls. - Table not included.
Equipment Location:SOUTHEAST
EX-FACTORY INC.
704-841-2001
7.5 HP Direct motor drive, 16" max. blade dia. x 1" dia. arbor, 4-1/2" max. depth of cut, 1-9/16" max. dado capacity. -- 25" Max. crosscut (17-1/2" w/fence in normal position) and 31" max. ripping cap. (23-1/2" w/fence in normal position). -- Saw head tilts left 45³ , Saw pivots 45³ left and 70³ right -- Unique NORTHFIELD ram & track travel system, includes rear stop bar with (6) 7/8" stops; equipped for compound angles left & right. -- Complete with: 25' X 48" work table. Work table height 32". Safety guard w/kickback preventer, automatic blade return device & push button magnetic controls.
Equipment Location:SOUTHEAST, AL
EX-FACTORY INC.
704-841-2001
NORTHFIELD UNIPOINT X-36AF Heavy Duty Radial Arm SawEquipped with: 7.5 HP Direct motor drive, 16" max. blade dia. x 1" dia. arbor, 4-1/2" max. depth of cut, 1-9/16" max. dado capacity. -- 25" Max. crosscut (17-1/2" w/fence in normal position) and 31" max. ripping cap. (23-1/2" w/fence in normal position). -- Saw head tilts left 45³ , Saw pivots 45³ left and 70³ right -- Complete with: Unique NORTHFIELD ram & track travel system, includes rear stop bar with (6) 7/8" stops; equipped for compound angles left & right. -- 25' X 48" Work table; work table height 32". -- Includes: Safety guard w/kickback preventer, automatic blade return device & push button magnetic controls.
Equipment Location:PACIFIC NORTHWEST, AL
EX-FACTORY INC.
704-841-2001
OMGA MODEL600 P3S RADIAL ARM SAW max. crosscut cap.: 24" Wide x 4-1/2" deep (at 90°); 5 HP - 3,200 RPM motor, 14" saw blade and a 1" dia. arbor; the saw head swivels & tilts both in the horizontal & vertical axis. -- 3-3/16" Depth of cut at 45° bevel cut, ripping cap. is 32-5/8", miters 45° to left & right. Table size 31" x 35", wooden tabletop with built-up full length back fence. -- Saw sliding carriage is fitted with (8) bearings and runs on hardened steel tracks. The locking is self-centering at the main angle positions of the arm, the motor, the carriage and all the intermediate angles can be locked manually. -- Equipped with: Totally enclosed upper blade guard, gravity type lower blade guard, automatic head return, self-braking motor with electromagnetic brake (stops blade within approx. 2 Sec), magnetic controls, and push button station. -- The unit is provided with standard overload protection with no-volt coil, automatic head reversal and motor brake.
Equipment Location:MIDWEST
EX-FACTORY INC.
704-841-2001
OMGA RN 700 FM Radial Arm SawFeaturing: Solid saw carriage with replaceable tempered steel sliding tracks; carriage travels on (8) bearings with dust scrapers for smooth travel & extended track life. -- Self-centering locking in the main angle positions (3) places: the saw arm, the motor & blade assembly swivel and the motor carriage tilt; additional manual locking at all intermediate angles. -- The OMGA RN 700 FM has easy and extremely practical unlocking of the arm for left/right swing on the front of the beam.Complete with: -- Swiveling of the saw blade assembly and tilting of the blade on the vertical and horizontal axes. -- Standard overload protection with no-volt coil and motor brake. -- Spring loaded return for safe return of saw head after completion of the cut. Includes: -- Oversized replaceable wooden tabletop with full length back fence; fabricated open steel base; magnetic controls, push button controls & thermal overload switch.
Equipment Location:MIDWEST
EX-FACTORY INC.
704-841-2001
16" Blade cap. 5 HP - 3,450 RPM TEFC motor, 64" arm length; 34" cutoff cap at 90°. approximately 6" depth of cut; Rotates 170°, adjustable depth of cut. -- Complete with: Blade guard, auto-return, adjustable arm stop, heavy gauge steel support stand. Dimensions: 60" x 96" x 78".
Equipment Location:WEST COAST
EX-FACTORY INC.
704-841-2001
7.5 HP Motor, Approx. 16" rip capacity, 0-90ø tilt, 180ø left right miter adjustment. --Approx. 20" Stroke of Saw head --Jones Guards SW 16 L "Snowflake" Style Guard, Patent date 1926 --Dating on motor for saw is 11/15/1950. --Interestingly, many Walker-Turner radial arm saws from the 40's - 50's all have the meaningless same "serial number" of 23-243.
Equipment Location:MIDWEST
EX-FACTORY INC.
704-841-2001