You Have Selected

 
 
  • Used
  • New
 
  •  
 
  •  
 
  •  
 

 
2459 Results Found for Sawmill Viewing 1 - 20 of 2459 results
RECENTLY ADDED
PREMIUM LISTINGS

Cardinal Circular Sawmill

Call for Price
COMPLETE SAW MILL CARDINAL - SWP complete semi-automatic saw mill consisting of 3-strand log in-feed chain deck; 2-strand chain seperator table; de-barker in-feed chain conveyor, MORBARK rosser head type 60 HP de-barker; c/w out-feed chain conveyor with hydraulic log tipper; 3-strand mill in-feed chain conveyor; CARNIDAL incline separator; CUT-CO 36"twin saw with twin overhead blades; cobination single cant twin slab carrier with manual refuse station; CARNIDAL incline slab de-scrambler; re-saw/grading in-feed roll conveyor; CARDNIAL 689C 42" slab re-saw automatic saw with MUDATA PLC control; 6-strand edger in-feed table; 7-strand re-saw out-feed table; CARDINAL 4-strand finished lumber out-feed table; CARDINAL incline de-scrambler; CANADIAN TRIM double end precision cut to length saw; 6-strand trim saw transfer table; waste/scrap recovery system. HAS THE CAPACITY TO SAW 40,000 BD FT OF 8 FT CEDAR IN 8 HOURS LOCATED IN ARTHURETTE, NB. COMPLETE SAW SHARPENING SYSTEMS INCLUDED. MILL COMES WITH 46 ACRES OF LAND.
Equipment Location:Moncton, NB
Graystone Quarries
506-961-2445
6' McDonough Right Hand Bandmill, 10 Extra Bands, Some New $15,000 641-722-3348
Equipment Location:Drakeville, IA
RJ Forestry
641-722-3348

Comact 8ft Lumber Stacker

Call for Price
Comact 8' Lumber Stacker
Equipment Location:Beaver, WA
LPS Equipment & Acquisition Co.
731-986-4351
Cooper Machine has a New 2016 MIT True Lumber System available and in stock. This machine includes: - For logs 8-17' long and up to 36" in diameter - 17.5° stationary slant carriage has three reinforced steel knees, pneumatic dogs, motorized log rotators, board and sawdust conveyor, full hydraulic drive and three arms to assist in rotating logs on the car - Inclined double cut 17.5° movable headrig with 49 inch solid steel wheels, 6" band, high tension pneumatic system, mobile pressure guides, mechanized rails and winch for headrig movement with 30hp motor with electromagnetic brake frequency inverter - 6 x 6 climate controlled cab - Comes as a modular unit with 20' log infeed and substeel - Includes five days of startup with both a MIT and Cooper technician. This machine does not include any setworks, so you can use whichever system you want to. Setworks can be added at an additional price. This machine has a smaller footprint than a conventional carriage. The modular unit allows for lower installation and start up costs. Built heavy with a combined modular weight of over 90,000lbs. This machine is currently disassembled for shipping. It's priced ready to move. For more information, give us a call.
Equipment Location:Wadley, GA
Cooper Machine Company, Inc.
478-252-5885
All new socks, new airlock and new air valve assembly kit. Works well. $3500 OBO 612-875-4966 - Ben. Call or text: all offers considered
Equipment Location:Waconia, MN
Pine Products Inc
952-442-5988
Complete Shaving Operation For Sale 7 1/2 Acres of Land, 40 Load Shavings Storage Buildingm 40 X 60 Shop, 20 X 50 Office w/ Lean to, Shavings Operation Capable of 30 to 50 Loads per week. Call for Details Office 919-207-2539 Cell 919-868-4684
Equipment Location:Newton, NC
West Farms Wood Products LLC
919-207-2539
Heartwood Dbl Cut Diesel Powered Band Mill with Debarkers forward and Reverse S/N 96-073
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Right hand 3 HB mill. 60 hp carriage drive, electric over hydraulic sawyer controls, electronic setworks, log turner, log loader, carriage,track,panagrahp, husk, 125 hp motor. Gone through at factory 1 year ago for rebuild. Was just taken out of production. The setworks are only 1 year and were 10K - Looking to sell ASAP because its no longer needed. Make offer - 612-875-4966
Equipment Location:Waconia, MN
Pine Products Inc
952-442-5988
HMC Rosserhead debarker with Perkins 160 H.P. Genset 20’ infeed deck & barn sweep. Fair condition $10,000 419-368-0005
Equipment Location:Londonville, OH
Hochstetler Milling
419-368-0005
Equipment Location:Aiken, SC
Hutto Wood Products
803-564-7173
Wood Shaving Mill, Box size is 40" wide, 52" long, 2 40" Cutting Heads with 6 rows of knifes Per Head, 75HP electric motor, 3 phase 230/460 volt drive the Heads, 25HP motor runs hydraulics, Electrical starters and disconnects and 2 conveyors included, Mill is currently in use, $5,000 Don 803-338-8085
Equipment Location:Elgin, SC
Smith Sawmill
803-338-8085
2010 Jackson 36D-10HL Shaving Mill, 8' box, (2) 10" diameter, 10 knife heads with 50hp electric motors, includes controls, starters and hydraulic pump unit, 40' long x 2 strand log deck; 23' long pan type belt conveyor and 40' long concave type belt conveyor, 68,500 FOB
Equipment Location:Brooklyn, CT
Sigfridson Wood Products
860-774-2075
Fontane 5" Band Resaw w/Complete Runaround Also Comes w/Complete Sharpening Room $30,000 Delivery Available! 814-603-0064
Equipment Location:Brockway, PA
Watt Lumber
814-603-0064
Used Linden double acting step feeder(s), Linden 4-36-50 log step feeder, serial# 98-1151 and 1152, 4 steps, 36" stroke, 50 degree angle, 25 hp electric motor belt driven to SM Cyclo reducer drive, approximately 4ft elevation gain, each box is 24" wide and is referred to "narrow box version" and has maximum contact on logs, 22 boxes wide, log length capacity 50ft, factory prints/drawings can be view in photos, Step feeder can be used as 2 individual 25ft long feeders and is priced at per 25ft section- 2 total section available - both run independently and has a electric motor and gear reducer for each section, estimated weight of each 25ft section is approximately 50,000 LBS or 100,000LBS for the total 50ft section. All information is from Linden MFG and we have a copy of the original drawings available, Step feeders are stored in our yard and ready for prompt shipment. Price includes loading onto truck, we can also quote you a delivered price to your location. YouTube videos of step feeder before it was dismantled: https://youtu.be/r-4vExQlDQM , https://youtu.be/uQ4pI19p9t8 , https://youtu.be/HziXK2CtgsI , https://youtu.be/pk8iqnsIB78 , https://youtu.be/MidD6aN8Zmw
Equipment Location:Toledo, WA
Machinery Scene
360-864-2800

McDonough 54in Band Resaw

Call for Price
McDonough 54" Horizontal Band Resaw With set Works
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
#3 Deluxe Automatic Meadows Mill in excellent condition. Cab, setworks, outfeed,all electric machine with 56" blade. Currently running, can see in operation. Located in the Pacific Northwest.
Equipment Location:Portland, OR
Sawmill Pallet Machine
971-271-8070

Morbark EM 16 Debarker

Call for Price
EM 16 Morbark Debarker w/Inf & Outf, 2 chain log deck w/ stop & loader, Patz bark conveyor. Spare debarking head, feed roll and misc parts. Machine has been well maintained & is in good operating condition. 215-679-6726
Equipment Location:Pennsburg, PA
Kline's Mill Suppliers Inc.
215-679-6726
Morbark 640 Debarker, 1126 Diesel, Caterpillar 147 HP, Tier 4; (2) Electric Morbark 640 Debarkers Available, $90,000 Each 530-701-4350
Equipment Location:Emeryville, CA
MDI Forest Products
530-701-4350
1992 Nicholson 104" Whole Tree Chipper, 10 Knife, Serial # N3052R 1250HP Motor with Starter and Infeed. The maximum log diameter which can be fed into the spout is 25”. The diameter of the shaft at the rear float bearing is 9-1/2". The last 12” of the shaft is tapered from 9-1/2” to 8-1/4”. Nicholson Chipper Line has been taken over by Kadant Carmanah Design.
Equipment Location:Forks, WA
LPS Equipment & Acquisition Co.
731-986-4351
35” NICHOLSON Debarker – Left Hand - $229,000.00 MODEL A-5 – S/N 6157 – Left HAND – REMOTE TOOL PRESSURE – AIR SEAL RING INCLUDES: 125 HP RING DRIVE MOTOR – 50 HP FEEDWORKS DRIVE MOTORS – OPERATORS CONTROL COUNSOL– RING AND FEEDWORKS LUBRICATION PUMPS 22” NICHOLSON Debarker – Right Hand - $129,500 22” MODEL A5 – S/N 5899 – MFG DATE 1989 – RIGHT HAND – REMOTE TOOL PRESSURE – AIR SEAL RING INCLUDES: 100 HP RING DRIVE MOTOR - 40 HP FEEDWORKS DRIVE MOTORS – SM CYCLO 11:1 REDUCER OPERATORS CONTROL COUNSOL - RING AND FEEDWORKS LUBE PUMPS. ALSO AVAILABLE IS A 22” ROTOR WITH CAPTIVE AIR SYSTEM RING HAS BEEN RE-CONDITIONED WITH NEW RING BEARING 22” NICHOLSON Debarker Left Hand - $129,500 MODEL A5B – S/N 243-7121 – MFG DATE 2000 - LEFT HAND – REMOTE TOOL PRESSURE – AIR SEAL RING INCLUDES: 100 HP RING DRIVE MOTOR - 40 HP FEEDWORKS DRIVE MOTORS - SM CYCLO 11:1 REDUCER OPERATORS CONTROL COUNSOL - RING AND FEEDWORKS LUBE PUMPS. Note: ALL PARTS THAT DID NOT HAVE A MINIMUM OF 80% SERVICE LIFE HAVE BEEN RECONDITIONED OR REPLACED
Equipment Location:Grangeville, ID
JEM Machine, Inc.
208-451-0365