• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
125 Results Found for Band Resaw Viewing 1 - 20 of 125 results
RECENTLY ADDED
STANDARD LISTINGS

Baker Band Resaw

$155,000
SHOW DEMO - IN STOCK AND READY TO GO!! BAKER 20' BP DOMINATOR BAND SAWMILL WITH HYDRAULIC CONTROLS MOUNTED ON A CONTROL STAND, 50HP TEFC MOTOR, COMPUTER SET WORKS, ELECTRICAL PANEL COMPLETE WITH STARTERS, MOTOR OVERLOAD PROTECTION, NEMA 12 ENCLOSURES. PREIRED 15HP HYDRAULIC POWER UNIT, 1 1/2" BAND WIDTH, THREE FENCE ARMS, THREE TOE ROLLERS, INLINE DEBARKER. TWO LOG CLAMPS. ONE (1)CHAIN STYLE LOG TURNER, PRECISION BALL SCREW HEAD RAISE AND LOWER, DUAL CHAIN CARRIAGE DRIVE, BOARD DRAG BACK RETURN, BUILT IN MATERIAL REMOVAL CONVEYOR, VARIABLE FEED CONTROL, 36" DIAMETER PRECISION MACHINED BAND WHEELS, BLADE LUBRICATION DRIP TANK, HYDRAULIC BLADE TENSIONING, LASER LIGHT. INCLUDED CONTROL CAB WITH HEAT AND AIR CONDITIONING BAKER 3 STRAND LOG IN FEED DECK WITH PAC MAN LOADER ARMS BAKER STATIONARY BOARD EDGER WITH 15HP MOTOR WITH TAILING BELT BAKER REVERSE EDGER SYSTEM - POWERED ROLLER WITH FLIPPER AND KICKER, ACCUMULATION CONVEYOR, TIP TABLE AND RETURN CONVEYOR BELT. 2 EACH - SLAB RACK 2 EACH - LUMBER RACK
Equipment Location:Ellington, MO
Baker Products
573-663-7711

Baker Band Resaw

Call for Price
Call us today for more information on this Baker Model C 4 Head Resaw
Equipment Location:West Plains, MO
Global Machinery Sales LLC
417-256-8131

Baker Band Resaw

Call for Price
Call us today for more information on this Baker 3 Head Resaw
Equipment Location:West Plains, MO
Global Machinery Sales LLC
417-256-8131
Baker Model AX Band Resaw 2000 Under 1000 hours Gas Powered, 24 HP Onan engine Hydraulic belt in-feed and return Hydraulic powered hold down and hold over Capacity 8" x 12" cant, any length with supports Produces smooth and accurate cuts From 1/4" to 6" thick to 12" wide REDUCED!
Equipment Location:Blowing Rock, NC
Carolina Used Machinery
828-773-2204
BAKER 3 HEAD MDL BBR-O S/N 95-1256
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
BAKER A Bandsaw Horizontal Resaw -- Single Head Re-Saw, 15 HP TEFC motor, 6" wide x 12" high material capacity or 8" wide x 4" high above the blade with conveyor set a 0°. -- Equipped with: Spring infeed holddown, variable speed controlled by a hydraulic flow control valve and 2HP pump, non-tilting conveyor, and 28" steel bandwheels, BAKER'S exclusive low profile flat plate guide system w/rear rollers. Blade dimension 1-1/4". Note: New belt, wheels crowned.
Equipment Location:MIDWEST
Ed Flowerree
800-374-5009 ext:344
BAKER C 4-HEAD Horizontal Resaw with Return;6" Wide x 12" high capacity Re-Saw. -- Standard spring blade tensioning system; 13'-2" x 1-1/4" x 0.035 Blade provides thin Kerf savings. -- Quick & easy blade height adjustments. -- 28" Diameter, CNC machined, dynamically balanced, all steel band wheels, (4) bolt flange. -- Rough top feed belt combines with opposing side feed rolls and top hold downs. -- 20 HP High Efficiency, 3-Phase electric motor on each head. -- Variable feed speed from 20 to 120 FPM (6 to 36 MPM). -- Includes: Return conveyor for resaw of wide width.
Equipment Location:MIDWEST
Ed Flowerree
800-374-5009 ext:344
Machine Number: 1824 Machine Type: Resaw Manufacturer: Baker Location: Mid West Baker 4 Head Resaw With Return Call for details
Equipment Location:Mid West
Carolina Used Machinery
828-773-2204
Machine Number: 1643 Machine Type: Resaw Manufacturer: Baker Model #: Model A Location: Mid West Baker Model A Resaw Reconditioned Variable Speed Feed Serial# 94-969
Equipment Location:Mid West
Carolina Used Machinery
828-773-2204
BAKER BANG SAW WITH 2 40HP MOTORS, MAKES 4 CUTS AT ONCE
Equipment Location:Yuma, TN
LPS Equipment & Acquisition Co.
731-986-4351
There are several Baker resaws in this sale from single to multi-head.
Equipment Location:Cullman, AL
Tri-State Auction & Realty, LLC
865-376-7009
LIGHTLY USED BAKER "A MODEL" RESAW WITH A 20HP MOTOR S.N. BBR-O/15-4628 WITH REAR NON-POWERED HOLDDOWN ROUND INFEED TURNAROUND S.N. BT-O/15-825 ROUND OUTFEED TURNAROUND S.N. BT-O/15-826
Equipment Location:Ellington, MO
Baker Products
573-663-7711
Machine Number: 629 Machine Type: Resaw Manufacturer: Brewco Model #: Big Band Location: South East Brewco 4 Head Resaw Four Head Big Band
Equipment Location:Blowing Rock, NC
Carolina Used Machinery
828-773-2204
Brewco B-800 4 Head Band Resaw, Wheels have been recrowned and new bearings, Linear bearings & Rails on adjustable air guides have been replaced. Runs a 2" Band. Any air regulator, gauge, or micro-valve that needed was replaced. It has a 4' x 8' in feed belt with the horizontal chains in feed. A 4' x 16' out feed belt, and a 6" x 32' return belt. It has a hydraulic unit with 2 motors and 2 pumps.
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
5-head re-saw line with kick-off return after 1st saw,2" Band Blade includes hyd. system and electric disconnect combination starter panel. Also included is a disconnect at each saw. S/N BWD642
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
REDUCED Machine Number: 1182 Machine Type: Resaw Manufacturer: Brewco Model #: 3-Head Location: South East Brewco Big Band Saw 3 head machine 480Volt 3 Phase Mgf 1996 28" wheels Band length 13'2", width 1 1/4" Hydraulic drive feed 3 phase 5 HP motor Head motors 20 HP 6" maximum cant width Cuts 4-6" hardwood 70 fpm Airbaglift with easy spacer height adjustment Comes with spacers and some spare blades Good condition and ready to run
Equipment Location:Blowing Rock, NC
Carolina Used Machinery
828-773-2204

Brewco Band Resaw

Call for Price
Call us today for more information on this 2 Head Ez Cut
Equipment Location:West Plains, MO
Global Machinery Sales LLC
417-256-8131

Brewco Band Resaw

Call for Price
Call us today for more information on this Brewco Wolf B-1600 Runaround Grade System
Equipment Location:West Plains, MO
Global Machinery Sales LLC
417-256-8131

Brewco Band Resaw

Call for Price
Call us today for more information on this Brewco Wolf B-1600 Runaround Grade System
Equipment Location:West Plains, MO
Global Machinery Sales LLC
417-256-8131
Available for Immediate Delivery, the Brewco B-1600 is the Grade Run-Around System that set the standard in thin kerf. Includes starters, all hydraulics, controls, and saw cab. Call 800-237-6880 now.
Equipment Location:Central City, KY
Brewco, Inc.
270-754-5847