• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
116 Results Found for Screening System Viewing 1 - 20 of 116 results
RECENTLY ADDED
STANDARD LISTINGS
2006 Action Taper Slot Electric Vibratory Screener - Excellent condition
Equipment Location:Largo, FL
Apollo Equipment
503-585-1442
American Screener Victory Trommel Screen - 39 horsepower Yanmar engine - Excellent condition.
Equipment Location:Largo, FL
Apollo Equipment
503-585-1442
Includes 1/8", 1/4", 5/8", 1-3/4" and 3/8" x 2-1/2" slot. Also includes 1" and 2-1/2" screens
Equipment Location:Smyrna, GA
GrinderCrusherScreen.com
770-433-2670
Ideal for use with the Beyer 750 or 1050 crushers. - 5-1/2 yd Hopper - 30" Variable speed feeder - 4' x 8' 2-Deck screen - 26" x 18' Fines Conveyor (9'-10" discharge height) - 20" x 20' Middles Conveyor - 20" x 20' Overs Conveyor - 70-100 TPH Production - Air brakes on trailer - Optional tipping grizzly (as seen in photos) Generator Requiements: 35kW, 1800rpm Electrical Requirements: 480 volt, 3-Phase, 60 Hz. Approx.
Equipment Location:Smyrna, GA
GrinderCrusherScreen.com
770-433-2670
Ideal for use with the Beyer 0535 crushers. - No Hopper - 24" Feeder - 3' x 6' 2-Deck screen - 18" x 13' Fines Conveyor (7'-4" discharge height) - 16" x 15' Middles Conveyor - 16" x 15' Overs Conveyor - 30-60 TPH Production Generator Requiements: 25kW, 1800rpm Electrical Requirements: 480 volt, 3-Phase, 60 Hz. Approx.
Equipment Location:Smyrna, GA
GrinderCrusherScreen.com
770-433-2670
Ideal for use with the Beyer 0535 crushers. - No Hopper or feeder - 3' x 6' 2-Deck screen - 19" x 6'-6" Fines Conveyor (6' discharge height) - 19" x 8'-6" Middles Conveyor (4' discharge height) - 19" x 8'-6" Overs Conveyor (4' discharge height) - 30-60 TPH Production Generator Requiements: 25kW, 1800rpm Electrical Requirements: 480 volt, 3-Phase, 60 Hz. Approx
Equipment Location:Smyrna, GA
GrinderCrusherScreen.com
770-433-2670
This Black Clawson screen is in good running/working condition according to the seller and is ready to load! 6' x 16' Shaker screen 2" Holes on top, Fines screen underneath Arm sweeps the shavings through
Equipment Location:NC
Carolina Machinery Sales, Inc
704-288-1904
BM&M 4-Deck 4’ X 12’ Counterflow Screen with a total of 28 lineal feet of screen for high efficiency. -- Rated for 35 to 40 TPH on wood chips. -- Welded Mild Steel construction. -- Bolted Structural Steel Support Stand. -- Quick change screen access door. -- Dynamically Balanced design - Horizontal loading is <3% of maximum vertical loading. -- Main Drive Motor: 5 HP / 575-volt / 1800 RPM. -- OPTION: 32 spare Screens available for this unit at extra charge. Size Range: 5 Mesh to 2".
Equipment Location:EASTERN CDN
Bill Christoffersen
704-841-2001 ext:365
BM&M 2-Deck, 5’ x 10’ Super Screen with the following major features: -- Rated for 35 to 40 TPH on wood chips. -- Welded Mild Steel construction. -- Bolted Structural Steel Support Stand. -- Quick change screen access door. -- Dynamically Balanced design - Horizontal loading is <3% of maximum vertical loading. -- Main Drive Motor: 5 HP / 575-volt / 1800 RPM. -- Top screen: 5 Mesh. -- Bottom screen: 12 Mesh. -- OPTION: Extra Screens available at additional charge.
Equipment Location:EASTERN CDN
Bill Christoffersen
704-841-2001 ext:365
7’ x 12’ BM&M Double Ball Deck Screen with the following major components and features: -- Double Single Decks for greater capacity. -- 1 7/8″ Top Punch Plate Holes. -- (2) stainless steel Woven Wire Fines Screens with 3/16″+ size mesh. -- Ball Decks and Fines Pans are stainless steel. -- Infeed Landing Deck is stainless steel and (3) of the Discharge Chutes are stainless steel. -- Includes Bolt-together Support Stand and Hangers. -- New Paint & Cleaning - test run. Please see "Play Video" button on this listing located below the photos.
Equipment Location:PACIFIC NORTHWEST
Bill Christoffersen
704-841-2001 ext:365
BM&M 7X18 Screen System $10000 OBO 505-603-4602
Equipment Location:Cimarron, NM
roger tucker inc
505-603-4602
BM&M 5X10, Screen System, with Electric Panel $10000 OBO 505-603-4602
Equipment Location:Cimarron, NM
roger tucker inc
505-603-4602
BHS (Bulk Handling Systems) 6’ Wide x 17’ Long Disc Screen... (Disc Scalper) complete with the following features:(17) Rotating Shafts on 12” centers configured in (2) individually Powered Sections:● The first Section is comprised of (4) Shafts on 3” centers each with Daisy Discs made of AR400 material. The openings are 1½” nominal. ● The second Section is comprised of (13) Shafts with Discs on 6” centers.The openings are 3”nominal. (2) 10 HP Factory Electric Motor Controls & Drives.
Equipment Location:WEST COAST
Bill Christoffersen
704-841-2001 ext:365
FEEDER - One 14.5 cu. yd. feed hopper with 48" impact bed in loading zone, heavy duty impact 20 picking degree rolls, ceramic lagged head pulley, winged tail pulley, rubber adjustable skirt board, heavy duty variable speed hydraulic drive, and planetary gear box - The belt feeder is 27' long and 48" wide, it discharges onto the 6 X 16 screen deck - The wing walls on the feed hopper hydraulically fold in when the feeder is hydraulically lowered for transport height - Directional charging hopper walls guide material from the belt onto the screen - An electric actuator control allows the operator to control the feeder speed from either of two plant mounted control stations - Control panel and above cat walk with kill switch at both places SCREEN - The screen is an incline 6 X 16 3 deck with power stroke - The screen has a balanced design with eccentric cross shaft, 140mm bearings running in oil, and outside balancing counter weight - The screen stroke is oval angle - The stroke and throw of the screen are adjustable - The screen is mounted on a heavy-duty screen frame with hydraulic drive motor and guards - The screen is mounted on Firestone rubber springs that provide smooth start up, operation and shut down - Each corner of the screen is fitted with rubber pads that provide proper alignment of this screen basket to sub-frame - These pads also provide additional stability during start up and shut down - The screen is fitted with sub-frame, motor mount, motor drives, drive belts, and enclosed drive guard - The screen decks are heavy duty, huck riveted construction - The crown bar rubber is included in the plant - The screen decks are held in by side tension with clamp rails and bolts - Screen cloth is not provided as standard but can be quoted if requested - The screen stroke is 45 degrees from horizontal - The throw is adjustable and aggressive - These combined items plus the operating RPM provide excellent screening of the most difficult materials HYDRAULICS - Screen, off board conveyors, and feeders are hydraulic driven by 3 hydraulic pumps and feeder motor is variable in speed - Hydraulic tank is high capacity, four sided for good cooling and has overhead cover - The plant is equipped with a temperature controlled hydraulic oil cooler ENGINE - Screen plant is operated by rebuilt Deutz diesel engine - The diesel engine has a built-in fuel tank in the frame - Hour meter 5521 hours FRAME - Frame construction is 16" channel iron steel, 40 lbs. per foot, cross members, heavy-duty construction with multi pass welding. Road Runner Screen-It goes down the road at 65 miles per hour like an over the road trailer. Chassis complete with triple axle, spring suspension, running gear has oil filled hubs, air brakes, heavy duty axle, fenders, lights and fifth wheel pull. REAR SIDE DISCHARGE CONVEYOR - A second deck side discharge conveyor delivers material to one side for product piling - 14' discharge height whe
Equipment Location:Smyrna, GA
GrinderCrusherScreen.com
770-433-2670

2006 CEC Screening System

Call for Price
2006 CEC 6x16 RoadRunner Double Deck Series 2 - Feeder System - 2100 Hours - Good Condition - Excellent Working Condition
Equipment Location:Largo, FL
Apollo Equipment
503-585-1442
Very good running screen. Well maintained
Equipment Location:Smyrna, GA
GrinderCrusherScreen.com
770-433-2670
5x12, 2-deck portable screening plant. 8x10 feed hopper, 48" feed conveyor, 2 30"x8' side discharge conveyors. 1-1/2" top deck screen and 1/2" bottom with ball deck on bottom. Excellent condition, good tires, ready to run.
Equipment Location:Smyrna, GA
GrinderCrusherScreen.com
770-433-2670
5 x 12 double deck. Very good condition, clean, no leaks. Comes with ball tray. Maintenance history available.
Equipment Location:Smyrna, GA
GrinderCrusherScreen.com
770-433-2670
2006 CEC 6 x 16 Roadrunner Screener - 97 horsepower Deutz engine - Extra screens - Very good condition
Equipment Location:Largo, FL
Apollo Equipment
503-585-1442
2008 CEC RWS 2000 Roadrunner Screener/Separator - Cat engine - New belts - Excellent condition
Equipment Location:Largo, FL
Apollo Equipment
503-585-1442