• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
8 Results Found for Multiple Drill Single Viewing 1 - 8 of 8 results
STANDARD LISTINGS
SICOTTE J 20-5 Horizontal Boring Machine:12" x 60" Steel table with 2-1/2" manual up-and-down adjustment. -- (2) Drive groups with 1-1/2 HP - 3,500 RPM drive motor each, timing belt & pulley drive. -- (3) Spindles, 2" in dia. and with Jacob chuck 0 - 1/2" capacity. -- Each boring group with independent vertical adjustment, spindle advancement powered by 3 HP hydraulic pump, 0" - 6" stroke, variable speed up to (30) strokes/Min. -- Complete with: (3) Pneumatic holddowns, cycle timer, automatic/manual foot pedal switch, and emergency stop.
Equipment Location:EASTERN CDN
Louis Sicotte
704-841-2001 ext:329
Sicotte T 1050 Horizontal boring machine2-Spindle Horizontal Borer equipped with:1 HP Motor timing belt drives with motor starter.(2) horizontal spindles 1 1/2" diam. with spring collet 1/2" capacity turning at 3,450 RPM.Features: 4" Boring head stroke with air/oil system and adjustable feed speedSpindle mount on dovetail beam with minumim 1-1/2" to a max. 11 3/4" center distance.Complete with: (2) Pneumatic holddowns & 12" x 16" wooden table size.
Equipment Location:EASTERN CDN
Louis Sicotte
704-841-2001 ext:329
Sicotte Horizontal Boring Machine Model J 20- 812" x 96" Steel table with 2-1/2" manual up-and-down adjustment. -- (4) Drive groups with 1 HP - 3,500 RPM drive motor each, timing belt & pulley drive -- (7) Spindles 1 1/2" diameter with 1/2" spring coller. The minimum distance between 2 spindle is 1 1/2" -- Each boring group with independent vertical adjustment. -- Spindle advancement powered by 3 HP hydraulic pump, 0" - 6" stroke, variable speed up to (30) strokes/Min. -- Complete with: (4) Pneumatic holddowns, cycle timer, automatic/manual foot pedal switch, and emergency stop.
Equipment Location:MID ATLANTIC
Louis Sicotte
704-841-2001 ext:329
18" x 36" Table size (laminated hardwood top). -- 4-spindle 1 1/2" diameter with spring collet 1/2" capacity. -- (3) 1 HP - 1,750 RPM motors mounted on moveable 18" long arms with timing belt drive to spindles. -- 0" - 6" Vertical table feed, hydraulically operated, variable feed & table travel adjustable from front of machine, 3 HP hydraulic pump motor with reservoir. -- Complete with: Motor controls, foot pedal actuation, single or continous stroke and safety guard.
Equipment Location:EASTERN CDN
Louis Sicotte
704-841-2001 ext:329
24" x84" Table size (6) 1 HP motors mounted on 24" long arms with timing belt drive to (6) 2" diameter spindle with 0-1/2" capacity (2) spring loaded holddowns. -- 0" - 8" Vertical table feed, hydraulically operated, variable feed and table travel adjustable from front of machine, 3 HP hydraulic pump motor with reservoir. -- Complete with: Electrical control system with separate motor controls, single or continous stroke, manual and automatic cycle and foot pedal actuation and 1 plastic guard. -- Also included (2) spare spindles 2" diameter with jacob chuck 0-1/2" capacity and (2) Cast iron mounting arms. -- Machine come from a Federal penentiary so it never ran hard.
Equipment Location:ATLANTIC CDN
Louis Sicotte
704-841-2001 ext:329
Sicotte J3H-6 Vertical boring machine24" x 72" Table size -- (3) Spindle drive motors constisting of (2)1 HP and (1) 1 1/2 HP mounted on 24" long cast iron arms, motor base with ecccentric lock and timing belt pulley -- (3) 1 1/2" diameter spindle with spring collet 1/2" capacity. -- (2) spring loaded holddowns with mounting arm. -- 0" - 8" Vertical table feed, hydraulically operated, variable feed and table travel adjustable from front of machine, 3 HP hydraulic pump motor with reservoir. -- Complete with: Electrical control system with separate motor controls, single or continous stroke, manual and automatic cycle and foot pedal actuation. -- Also included: (1) additional motor starter for future installation of spindle drive motor
Equipment Location:EASTERN CDN
Louis Sicotte
704-841-2001 ext:329
SICOTTE J 20-4 Horizontal Boring Machine: -- 12" x 48" Steel table with 2-1/2" manual up-and-down adjustment. -- (4) Drive groups with 1 HP - 3,450 RPM drive motor each, timing belt & pulley drive. -- (6) Spindles, 2" in dia. and with Jacob chuck 0 - 1/2" capacity. -- Each boring group with independent vertical adjustment, spindle advancement powered by 3 HP hydraulic pump, -- 0" - 6" stroke, variable speed up to (30) strokes/Min. Complete with: --(3) Pneumatic holddowns. -- Cycle timer, automatic/manual foot pedal switch, and emergency stop.
Equipment Location:MIDWEST
Louis Sicotte
704-841-2001 ext:329
Sicotte T 1050 Horizontal boring machine -- 2-Spindle Horizontal BorerEquipped with: -- 2 HP Motor timing belt drives with motor starter. -- (2) horizontal spindles 2" diam. with spring collet 1/2" capacity turning at 3,450 RPM.Features: -- 4" Boring head stroke with air/oil system and adjustable feed speed -- Spindle mount on dovetail beam with minimum 2" to a max. 11 3/4" center distance.Complete with: -- (2) Pneumatic holddowns & 12" x 16" wooden table size.
Equipment Location:NORTHEAST
Louis Sicotte
704-841-2001 ext:329