• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
46 Results Found for Skidsteer Viewing 1 - 20 of 46 results

Circular-Saws

Band-Saw-Blades-Wide

Wear-Parts

Tools

Chipper-Parts

Wear-Parts

Chainsaw

Mechanical-Harvesters

Marking-and-Tally
Find More Supplies
PREMIUM LISTINGS
2009 Case 465 Skidsteer, approx 2320 hours, Ser#N7M452478, cab w/ A/C & Heating,Super HiFlow Hydraulics Asking $24,000 Call Carl Kopocs 216-244-4413 or 440-988-4477
Equipment Location:Amherst, OH
Edward's Tree Service
440-988-4477
STANDARD LISTINGS
Just serviced with full synthetic oil change, filters and hydraulic oil change Hydraulic tank and block heater on a timer 12,000 lumen LED light bar on frt & 1000 lumen work light on rear New seat Oil changes w/filters every 250 hrs 18 gpm hydraulic flow rate for attachments and elect controls for blowers etc. 2" hitch tube for moving trailers Roof mounted LED light beacon w/multiple flash patterns Call Chris at 616-299-0559
Equipment Location:Grandville, MI
Integrity Truck & Equipment
844-483-7253
2012 BOBCAT S650,CAB AND HEAT, 2 Spd, Tires @ 60%, 2650 Hrs, Hand/Foot Controls, Power Bob-Tach, Completely Serviced Ready to Go.
Equipment Location:Brainerd, MN
U.S. Equipment Broker, LLC
877-451-9525
2013 Bobcat S570 Wheeled Skidsteer, Low 1500 Hours, Hand Foot Controls. Ready to work.
Equipment Location:Constantia, NY
Kleis Equipment LLC
315-779-4636
Cab/Heat/A/C, 2 Speed, A91 Package, Hi-Flow, Air Ride Seat, Stereo, Nice Low Hour Unit.
Equipment Location:Brainerd, MN
U.S. Equipment Broker, LLC
877-451-9525
Cab/Heat/A/C, Power Bob-Tach, Deluxe Instrument Package, 898 Hours, Standard Bobcat Controls, 12" Tracks, U/C@75%, Gold Package Machine. Please Call For More Info.
Equipment Location:Brainerd, MN
U.S. Equipment Broker, LLC
877-451-9525
A91 Package, Hi-Flow, SJC Controls, Forestry Package, Final Drives Rebuilt, NEW Tracks and Sprockets 200 Hours Ago, Ready To Work.
Equipment Location:Brainerd, MN
U.S. Equipment Broker, LLC
877-451-9525
92 HP, Cab/Heat/A/C, 2 Speed, ACS Controls, Very Good Under Carriage, Very Nice Unit. Call for More Info.
Equipment Location:Brainerd, MN
U.S. Equipment Broker, LLC
877-451-9525
92 HP, 1956 Hours, Cab/Heat/A/C, 2 Speed, Standard Bobcat Controls, Hi-Flow, Very Good Undercarriage, Very Nice Unit. Call for More Info.
Equipment Location:Brainerd, MN
U.S. Equipment Broker, LLC
877-451-9525
2007 Bobcat S-185 w/ 1037.6 Hrs,Unit Has Factory Block Heater Installed, Comes With 68" Bucket w/ Bolt on Cutting Edge, Has Just Had Professional Paint Job, With New Bobcat Decals, Machine is Rated 10/10, New Tires, 61 HP Kubota Turbo Diesel Engine, Has Hand and Foot Controls, Nice Tight Machine, Serviced and Ready To Work. Unit Weighs 6420 lbs. $21,900.00 Usd
Equipment Location:Brainerd, MN
U.S. Equipment Broker, LLC
877-451-9525
Gold Package, Cab/Heat/A/C, 2 Speed, 5225 Hours, Tires@75%, All Service Records are Available, Machine is Ready to Work.
Equipment Location:Brainerd, MN
U.S. Equipment Broker, LLC
877-451-9525
2004 CASE 85XT WHEELED SKID STEER COMES WITH STEEL TRACKS BUCKET FORKS AND AUGER
Equipment Location:Manton, MI
LUTKE EQUIPMENT LLC
231-824-9505
2004 CAT 262-B Skid Steer - 70 horsepower engine - Very good condition
Equipment Location:Largo, FL
Apollo Equipment
503-585-1442
2002 CAT 246 Skid Steer - Rebuilt 70 horsepower Perkins engine - Good condition.
Equipment Location:Largo, FL
Apollo Equipment
503-585-1442
2008 Caterpillar 299C Rubber Track Skid Loader, NEW CAT Motor (200 Hrs Ago), New Tracks, Under Carriage in Good Condition, Cab/Heat/A/C, 2 Spd, High-Flow XPS, Hydraulic Quick-Attach, and Bucket. Machine is Ready To Go!
Equipment Location:Brainerd, MN
U.S. Equipment Broker, LLC
877-451-9525
2010 Caterpillar 246C Skid Loader, Open Station, Completely Serviced, Ready to Go To Work, With or Without Steel Tracks! Gross Power75 hp 56 kw Net Power73 hp 54 kw Power Measured @2500 rpm Displacement 201 cu in 3.3 L Number of Cylinders 4 Operational Weight 7381 lb 3348 kg Fuel Capacity26 gal 98 L Cooling System Fluid Capacity 3.7 gal 14 L Engine Oil Fluid Capacity 2.6 gal 10 L Hydraulic System Fluid Capacity 15 gal 57 L Chain Box Fluid Capacity - each side2.6 gal 10 L Max Speed 7.7 mph 12.5 km/h Operating Voltage 12 V Alternator Supplied Amperage 90 amps Loader Operating Load Rating 2150 lb 975 kg Tipping Load 4300 lb 1950 kg Breakout Force 7328 lb 3324 kg Hydraulic Pump Flow Capacity 22 gal/min 84 L/min Relief Valve Pressure 3335 psi 23000 kPa Length w/o Bucket 10.3 ft in 3124 mm Width Over Tires 5.5 ft in 1676 mm Height to Top of Cab 6.8 ft in 2083 mm Clearance at Max Lift and Dump 8 ft in 2425 mm Wheelbase 4.1 ft in 1240 mm Ground Clearance 8.8 in 225 mm Reach at Max Lift and Dump 23.6 in 600 mm Turning Radius from Center - machine rear 58.5 in 1486 mm
Equipment Location:Brainerd, MN
U.S. Equipment Broker, LLC
877-451-9525
Fully enclosed cab with heat/A/C. Auxiliary hydraulic plumbing. Two speed drivetrain 18' tracks 84'' wide GP smooth edge bucket witholt on teeth.
Equipment Location:Bardstown, KY
Team Boone
502-817-3323
CAT 263B Skid Steer 2014 300 hours two speed grapple and bucket
Equipment Location:Blowing Rock, NC
Carolina Used Machinery
828-773-2204
2006 Caterpillar 247B Rubber Track Skid Loader, NEW 62 HP CAT Engine, New Undercarriage, Cab/Heat/A/C, Power Quick-Attach. PLEASE SEE BELOW: Here is a list of what was done. It had a blown engine because the oil pick-up tube cracked. I pulled an oil sample on the hydraulics and it tested out good. This machine has a brand new drop in engine with Caterpillar parts and labor warranty 2 year 2000 hours. I also completely went through the undercarriage, New Tracks and replaced 3 axels and every wheel with OEM wheels, bearings, seals, snap-rings, and washers. I reused 4 outside small idler wheels because they were in great shape but I installed new bearings, races, and seals. All other 20 wheels where replaced. I also had the bucket reconditioned. I had a new 1/4" floor welded in and all new wear plates welded on. I installed a brand new CAT cutting edge. I also replaced all of the following: -Alternator -CAT Battery -Upper and Lower Radiator Hoses -New Inner and Outer Drive Rollers and most of the bolts on the right side. -Fuel Lines -Fuel Filter -Hydraulic Filters -CAT ELC Coolant -Starter -Fan Belt -Foam Under the Cab -Rear Door Latch -Entry door hydraulic safety cut out switch -engine air filters -cab fresh air and recirculation filters -cab blower fan assembly -cab blower fan resistor -A/C Thermo switch -stickers on machine -95% tracks on the machine -new turbo charger -new fuel injectors -new fuel injector pump and all new lines -all new sensors on the engine -all new CAT replacement light assemblies because some of the bulbs were dim - And Block Heater.
Equipment Location:Brainerd, MN
U.S. Equipment Broker, LLC
877-451-9525
2-SPEED TRAVEL, BUCKET, CAB, AIR CONDITIONING, CAT 272D SKID STEER LOADER, COLD WEATHER PACKAGE, ELECTRIC QUICK COUPLER, PROPORTIONAL HYDRAULICS, STANDARD FLOW HYDRAULICS
Equipment Location:Harrisburg, PA
Cleveland Brothers Equipment Co.
866-532-9023