• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
11 Results Found for Table Saw Viewing 1 - 11 of 11 results
STANDARD LISTINGS
10" Blade cap., 5 HP motor - 3,450 RPM, 5/8" arbor, 2-1/8" depth of cut @ 45°, 3-1/8" depth of cut @ 90°. -- Equipped with: Large hand wheels for raise, lower, and tilting of the blade, T-Slot miter gauge for crosscutting large pieces. -- Includes: Magnetic starter, 4" dust collection outlet, operators manual.
Equipment Location:WEST COAST
Ed Webb
800-374-5009 ext:377
DELTA UNISAW 10" CAPACITY TABLE SAW10" Blade, 5/8" dia. tilting arbor 0° - 45°, 5 HP - 3,450 RPM belt driven arbor, 52" max rip cap. with BIESEMEYER style rip fence system to the right of blade, 12" max. rip cap. to left of blade. 3-1/8" Max. depth at 90°, 2-1/8" max. depth at 45³, max. dado width 13/16", distance edge to blade 12-1/4". -- 20" x 27" Main Cast Iron table, 27" x 76" total table area w/extension wings & laminate table, 3/8" x 3/4" T-slot in main table; 34" table height. -- Complete with: Blade guard, large access door, push button controls, and motor starter.
Equipment Location:MID ATLANTIC
Ed Webb
800-374-5009 ext:377
GENERAL - 550, ...Cabinet Makers Table Saw.12" Blade, 5/8" dia. right tilting arbor 0° - 45°, 7.5 HP - 4,000 RPM belt driven arbor. -- 40" Max. rip cap. with quick release ACCUFENCE style rip fence, 3-1/8" max. depth @ 90°, 2-1/8" max. depth @ 45°, max. dado width 13/16", distance edge to blade 12-3/4". -- 28" x 36" Table, 3/8" x 3/4" T-slot in table, 34" table height. -- Complete with: Overarm Blade guard, large access door, push button controls, and motor starter.
Equipment Location:MIDWEST
Ed Webb
800-374-5009 ext:377
Martin Type 70 Table Saw S/N V-B 1877
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
5 HP - 3,600 RPM "TEFC" motor built directly on the saw arbor , sliding table saw, 14" dia.saw blade projects thru table 3", 1" dia. saw arbor, saw arbor will tilt 0° - 45. -- Rip up to 29 3/4" wide with plain fence, cross cuts up to 16" wide by 3" thick.
Equipment Location:WEST COAST
Ed Webb
800-374-5009 ext:377
TANNEWITZ - XJ, ...Table Saw.5 HP - 3,600 RPM Fan cooled motor, 1" right tilting arbor Table Saw with a 1-piece main table, table size 42" wide x 44-1/2" deep. -- Base formed from hot-rolled steel of 5/16" thickness & welded into (1) solid unit; 10" dia. hand wheels for easy adjustment of tilting, raising & lowering of arbor. -- Complete with: Extended rack & pinion adjustable rip fence for greater ripping capacity, left- & right-hand T-slot miters. -- 16" Blade dia., 4" dado width cap., 4" cut depth at 90°, 3" cut depth at 45°. -- Equipped with: Taper pin miter with micrometer adjustment on fence, magnetic controlled off-switch, 6" dust exstraction with auxiliary rear opening for easy access. -- 4-Roll POWERMATIC Feeder Please NOTE: No blade guard.
Equipment Location:SOUTHEAST
Ed Webb
800-374-5009 ext:377
TANNEWITZ PRODUCTION TABLE SAW5 HP - 3,600 RPM Direct drive arbor motor; 18" blade cap. with 1" dia. arbor; 5" depth of cut w/18" blade. Tilts 0° - 45°; 37" x 43" Main Table, and 25" x 30" aux. table. 36" rip cap. -- Complete with: 6" dust outlet. Rack and pinion fence, miter gauge and blade guard.
Equipment Location:MIDWEST
Ed Webb
800-374-5009 ext:377
5 HP - 3,600 RPM Fan cooled motor, 1" right tilting arbor, 44" x 65" table size. -- Base formed from hot-rolled steel of 5/16" thickness & welded into (1) solid unit; 10" dia. hand wheels for easy adjustment of tilting, raising & lowering of arbor. -- Complete with: 16" blade diameter., 4" dado width cap., 4" cut depth at 90 degrees, 3" cut depth at 45 degree, magnetic controlled off-switch, 6" dust extraction with auxiliary rear opening for easy access, saw does not include rip fence.
Equipment Location:SOUTHEAST
Ed Webb
800-374-5009 ext:377
5 HP - 3,600 RPM Fan cooled motor, 1" right tilting arbor, 44" x 65" table size. -- Base formed from hot-rolled steel of 5/16" thickness & welded into (1) solid unit; 10" dia. hand wheels for easy adjustment of tilting, raising & lowering of arbor. -- Complete with: 16" blade diameter., 4" dado width cap., 4" cut depth at 90 degrees, 3" cut depth at 45 degree, magnetic controlled off-switch, 6" dust extraction with auxiliary rear opening for easy access, saw does not include rip fence.
Equipment Location:SOUTHEAST
Ed Webb
800-374-5009 ext:377
16" Blade cap., 1" arbor, 5 HP motor, table tilts 0-45°, 37" x 43" cast iron table size. -- 4" Depth of cut at 90°, 3" at 45° -- 4" Vertical blade adjustment, 4" dado capacity -- Complete with: Non-tilting rack and pinion rip fence, (2) miter gauges w/ dovetail t-slots, blade guard, blade and magnetic starter.
Equipment Location:MID ATLANTIC
Ed Webb
800-374-5009 ext:377
TANNEWITZ - XJ, ...Table Saw w/Tilting Arbor.The" Legendary" TANNEWITZ XJ Table Saw with: 5 HP - 3,600 RPM Fan cooled motor, 1" right tilting arbor, 44" x 65" table size. -- Base formed from hot-rolled steel of 5/16" thickness & welded into (1) solid unit; 10" dia. hand wheels for easy and smooth adjustment of tilting, raising & lowering of arbor. -- This Saw has been upgraded to include an AMBITECH Model SS-4A-10 - Electronic Motor Brake. -- Complete with: 16" Blade dia., 4" dado width cap., 4" cut depth at 90°, 3" cut depth at 45°, magnetic controlled off-switch, 6" dust extraction with auxiliary rear opening for easy access. -- Saw includes (2) miter gauges, but does NOT include Rip Fence.
Equipment Location:MIDWEST
Ed Webb
800-374-5009 ext:377