• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
20 Results Found for Table Saw Viewing 1 - 20 of 20 results
STANDARD LISTINGS
3-axis CNC controlled Rip fence to 1300mm Automatic lubrication 3200mm table length 750mm table extension Eye level control panel Miter fence w/ digital display Stored indoors The owner has confirmed that this Altendorf F-45 Posit is in good runnin/working condition and is ready to load!
Equipment Location:GA
Carolina Machinery Sales, Inc
704-288-1904
10" Blade cap. with scoring blade (12" without scoring blade); 3-1/8" depth of cut with 10" blade; 5 HP motor (drives main blade and scoring blade); 0ø - 45ø tilting arbor, 1" dia. main saw arbor and 1" dia. scoring arbor; 50" rip cap., 28-1/2" x 83" main table (including UNIFENCE table). -- Complete with: Miter gauge, magnetic starter and 50" UNIFENCE.
Equipment Location:SOUTHWEST
Ed Webb
704-841-2001 ext:377
DELTA UNISAW TABLE SAW WITH TABLE EXTENSION10" Delta UNISAW, Left Tilting Arbor Saw Model #36-L53L, 5 Hp Delta# 438-02-314-2177 Motor, Will work with 230/460 VAC 3 Phase Power, currently wired for 460 VAC 3 Phase, 24 Volt Low Voltage Magnetic Motor Control, 52" Unifence Saw Guide (Model 36-906), 10" 60 Tooth Carbide Blade, Miter Gauge, Wrenchs, Manuals, 27"x 45" Extention Table, and 24" x 51" Out-Feed table.
Equipment Location:MIDWEST
Ed Webb
704-841-2001 ext:377
DELTA/ROCKWELL 34-450 UNISAW Table Saw: 10" Dia. blade cap., 3 HP - 3,450 RPM motor, 5/8" dia. arbor, 13/16" max dado width, 3-1/8" depth of cut. -- 50" Max. rip cap. to the right of the blade, 15-1/2" max. rip cap. to th left of the blade, 2-1/8" max. thickness of cut at 45ø. -- 34" Table height, 41-1/2" height w/ bse, 27" x 72" table size w/extensions, 3/8" x 3/4" T-Slot miter guage groove. -- INCLUDES: BIESEMEYER T-Square rip fence, BIESEMEYER safety blade guard, table extension, rip fence, miter gauge, magnetic starter, cord and plug.
Equipment Location:MTN/CENTRAL CDN
Ed Webb
704-841-2001 ext:377
•Maximum panel size and miter positions: ?45" @ 90° ?42" @ 22½° ?31" @ 45° •Maximum cutting height from bottom of countertop deck - 5" •Maximum cutting height including nose builddown - 5¾” •Variable speed traverse in cutting direction •(4) pneumatic hold down clamps - Indepedently positionable for various top sizes •Accurate square and miter joints •PLC control •80-140PSI •35 amps •Machine working height: 35½” •Machine height without laser: 67" (w/ laser 75") •68"W x 97"L •2,000 lbs This machinery was pulled out of service in 2008 and has been in dry storage since. When it was taken out of service, the saw operated perfectly. The seller has confirmed that this is in excellent working/running condition. This was used in a small countertop shop and is used to produce precise square and miter cuts on countertops.
Equipment Location:CO
Carolina Machinery Sales, Inc
704-288-1904
GENERAL - 550, ...Cabinet Makers Table Saw.12" Blade, 5/8" dia. right tilting arbor 0° - 45°, 7.5 HP - 4,000 RPM belt driven arbor. -- 40" Max. rip cap. with quick release ACCUFENCE style rip fence, 3-1/8" max. depth @ 90°, 2-1/8" max. depth @ 45°, max. dado width 13/16", distance edge to blade 12-3/4". -- 28" x 36" Table, 3/8" x 3/4" T-slot in table, 34" table height. -- Complete with: Overarm Blade guard, large access door, push button controls, and motor starter.
Equipment Location:MIDWEST
Ed Webb
704-841-2001 ext:377
General 350 10" Tilting Arbor Table Saw÷Made In Canada÷No fence÷220v 1ph÷3hp
Equipment Location:WESTERN CDN
Ed Webb
704-841-2001 ext:377
FEATURES: Blade Guard with 2 1/2" Dust Port 5" Main Dust Port Adjustable Scoring Knife Kerf Adjustable Riving Knife Micro Adjustable Single Lever Locking Fence Scoring Saw Blade Ensures Tear-out Free Cutting Durable Extruded Aluminum Sliding Table Large Handle for Effortless Cutting Operations Blade Tilts 45 degrees for Miter Cutting Miter Fence can be Positioned at 45 degrees Right and Left Miter Fence has two Swing Stops for Repetitive Cutting Table Extension on Right and Rear Side of Main Table Permits Convenient Cutting of Large Panels Rugged Construction for Maximum Stability Precision-Ground Cast-Iron Main Table Quick Clamp on Sliding Table Grizzly G0591 Sliding Table Saw. Owner bought new approximately 5 to 6 years ago and never used in his shop
Equipment Location:AL
Carolina Machinery Sales, Inc
704-288-1904
IMS CTS-10HD 10" table saw.Blade, 5/8" dia. arbor 0 - 45°, 3 HP motor belt driven @ 4,000 RPM, 3" max. depth @ 90°, 2-1/4" max. depth @ 45°. -- Approx. 27" x 36" Precision ground cast iron table with miter groove, 34" table height. -- Complete with: large access door, push button magnetic controls & 4" dia. dust outlet. Price does NOT include the 4-Roll Feeder.PLEASE NOTE: The future buyer needs to add an overhead blade guard or feeder to meet OSHA requirements.
Equipment Location:SOUTHEAST
Ed Webb
704-841-2001 ext:377

Martin Type 71 Table Saw

Call for Price
Martin Type 71 Table Saw S/N 121152
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351

Martin Type 70 Table Saw

Call for Price
Martin Type 70 Table Saw S/N V-B 1877
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
16" Blade cap., max. cutting height 3-3/4",.7. 5 HP - 3,600 RPM direct drive motor, 43" x 36" cast iron table size, table with (2) miter gauge slots which tilts by rack & pinion 0° - 45°, 5" max. vertical table adjustment, 24" rip cap.Complete with: Magnetic controls and rack & pinion fence.
Equipment Location:WEST COAST
Ed Webb
704-841-2001 ext:377
OLIVER - "260-D", ... Double Arbor Table Saw.Double Arbor Saw setup with: (1) Blade for rip and (1) for crosscutting. -- Equipped with: (2) 5 HP - 3,480 RPM Motors, 16" blade cap., blade projection of 3-3/4"; 41-1/2" x 44-1/2" main table, 17-1/2" x 44-1/2" ball bearing sliding table, tilting arbor up to 45°, rip capacity 51". -- Complete with: Miter gauge, over-arm blade guard, push button magnetic control, and table fence which tilts 45° to accomplish special cove cuts in conjunction with the tilting saw blade.Taken directly from the OLIVER Pattern Makers shop. Never used as a production machine!
Equipment Location:MIDWEST
Ed Webb
704-841-2001 ext:377

Powermatic 66 Table Saw

Call for Price
Powermatic Table Saw Model 66 S/N 00661621
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
POWERMATIC 72 TABLE SAW7.5 HP - 3,600 RPM Motor, takes 12" or 14" blade (max. depth of cut is 5-1/8" with 14" blade), 1" dia. arbor and (3) V-belt drives, 0° - 45° to left tilting arbor; 50" max. rip to right and 24" max. rip to left of blade; standard 38" x 48" table extended to 38" x 73". -- Includes: Magnetic starter, motor cover, 28" fence & rail. Also includes STEFF Feeder
Equipment Location:MID ATLANTIC
Ed Webb
704-841-2001 ext:377
12" Dia. blade cap., 5 HP - 4,000 RPM belt driven motor, 1" dia. arbor tilts 0° - 45°, 4-1/8" depth of cut, 50" rip cap., max. dado width 13/16", 37" x 38" table. -- Complete with: Factory fence, miter gauge and push button magnetic controls.
Equipment Location:GREAT PLAINS
Ed Webb
704-841-2001 ext:377
5 HP - 3,600 RPM Fan cooled motor, 1" right tilting arbor, 44" x 65" table size. -- Base formed from hot-rolled steel of 5/16" thickness & welded into (1) solid unit; 10" dia. hand wheels for easy adjustment of tilting, raising & lowering of arbor. -- Complete with: 16" blade diameter., 4" dado width cap., 4" cut depth at 90 degrees, 3" cut depth at 45 degree, magnetic controlled off-switch, 6" dust extraction with auxiliary rear opening for easy access, saw does not include rip fence.
Equipment Location:SOUTHEAST
Ed Webb
704-841-2001 ext:377
5 HP - 3,600 RPM Fan cooled motor, 1" right tilting arbor, 44" x 65" table size. -- Base formed from hot-rolled steel of 5/16" thickness & welded into (1) solid unit; 10" dia. hand wheels for easy adjustment of tilting, raising & lowering of arbor. -- Complete with: 16" blade diameter., 4" dado width cap., 4" cut depth at 90 degrees, 3" cut depth at 45 degree, magnetic controlled off-switch, 6" dust extraction with auxiliary rear opening for easy access, saw does not include rip fence.
Equipment Location:SOUTHEAST
Ed Webb
704-841-2001 ext:377
16" Blade cap., 1" arbor, 5 HP motor, table tilts 0-45°, 37" x 43" cast iron table size. -- 4" Depth of cut at 90°, 3" at 45° -- 4" Vertical blade adjustment, 4" dado capacity -- Complete with: Non-tilting rack and pinion rip fence, (2) miter gauges w/ dovetail t-slots, blade guard, blade and magnetic starter.
Equipment Location:MID ATLANTIC
Ed Webb
704-841-2001 ext:377
TANNEWITZ - XJ, ...Table Saw w/Tilting Arbor.The" Legendary" TANNEWITZ XJ Table Saw with: 5 HP - 3,600 RPM Fan cooled motor, 1" right tilting arbor, 44" x 65" table size. -- Base formed from hot-rolled steel of 5/16" thickness & welded into (1) solid unit; 10" dia. hand wheels for easy and smooth adjustment of tilting, raising & lowering of arbor. -- This Saw has been upgraded to include an AMBITECH Model SS-4A-10 - Electronic Motor Brake. -- Complete with: 16" Blade dia., 4" dado width cap., 4" cut depth at 90°, 3" cut depth at 45°, magnetic controlled off-switch, 6" dust extraction with auxiliary rear opening for easy access. -- Saw includes (2) miter gauges, but does NOT include rip fence.
Equipment Location:MIDWEST
Ed Webb
704-841-2001 ext:377