• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
9 Results Found for Truck Dumper Viewing 1 - 9 of 9 results
PREMIUM LISTINGS
New Airoflex Portable Trailer Tipper - One (1) Airoflex Equipment 45 Ton portable trailer tipper. Engineered with a rugged design, this fully portable trailer dumper can tackle the most challenging applications with a 10’ x 45’ platform, 45 ton lifting capacity, 63 degree tilt, a 2 minute up-cycle time, and a 100 HP diesel power unit with a 400 gallon tank. Walkways and handrails both sides, two (2) Hyco, 4-stage cylinders, ramp with walkway and handrails, fixed backstop, surface preparation to SSPC-SP6, rust inhibitive primer, and finished with industrial enamel. Designed for simple off-highway movement, it can readily be prepped for over-the-road transport, and no foundation required.
Equipment Location:Muscatine, IA
Airoflex Equipment
651-631-2527
STANDARD LISTINGS
AIROFLEX "HydroFlex" Model 37.5 Trailer Dumper with 38 FT x 10 FT deck. -- Hydraulic power unit. -- 50 Ton capacity, full tilt. -- Stationary Backstop, no pit required. -- Ready to load... save removal costs. -- This unit was previously tipping "hog fuel" wood trailers.
Equipment Location:PACIFIC NORTHWEST
Bill Christoffersen
800-374-5009 ext:365
AIR-O-FLEX Full Truck and Trailer (also B-Train) Dumper complete with the following features: -- 100 Ft. Tilting Deck to handle full truck and trailer or B-train and tractor. -- Full tipping angle. Great for wood chips, shavings or sawdust. -- Drive-Thru Style for rapid unloading. -- Material Discharge Conveyor. -- Hydraulic Power Pack. -- Steel Approach Ramp. -- Installation Drawing. -- Partially dismantled. Professional rigging and loading is available. Shipping will require two trucks.
Equipment Location:WESTERN CDN
Bill Christoffersen
800-374-5009 ext:365
PEERLESS "Portodump" Portable Trailer Dumper. This machine has a 32' long Tilting Deck with portable Approach Ramp and comes complete with Hydraulics, Catwalks, Axles, Outriggers, etc. -- This type of machine is highway-ready and can be towed to the site and set up quickly. They are designed for a full 50 ton capacity. No concrete is required if ground conditions are reasonably compatable. These are ideal for temporary sites or for sites where low-cost installation is a must.
Equipment Location:NORTHEAST, AL
EX-FACTORY INC.
704-841-2001
PEERLESS "Porto-dump" Portable Trailer Dumper. This machine has a 32'-6" long Tilting Deck with portable Approach Ramp and comes complete with Hydraulics, Catwalks, Axles, Outriggers, etc. -- This type of machine is highway-ready and can be towed to the site and set up quickly. This one is designed for a full 50 ton capacity. No concrete is required if ground conditions are reasonably compatable. These are ideal for temporary sites or for sites where low-cost installation is a must. -- Inspected by Peerless technician on 10/18/16.
Equipment Location:PACIFIC NORTHWEST
Bill Christoffersen
800-374-5009 ext:365
PEERLESS trailer dumper with 50 ft deck. -- Hydraulic power unit. -- Includes outfeed conveyor for chip or other product removal. -- Ready to load... Save removal costs. -- This machine has the feature of a long deck but it is definitely a "fixer-upper" for just the right buyer. Make an inspection and then make your best offer. --
Equipment Location:SOUTH, AL
EX-FACTORY INC.
704-841-2001
Full Truck and Trailer Dumper complete with material receiving Bin and the following features: -- Full 63 degree tilt. -- 66 Ft. Tilting Deck. -- Hydraulic Power Pack with dual Pumps. -- 20 Ft. x 40 Ft. Receiving Bin with 18-Chain Discharge. -- Professional rigging and loading is available.
Equipment Location:SOUTHEAST
Bill Christoffersen
800-374-5009 ext:365
PHELPS Full Trailer & Tractor Dumper/Tipper with the following major components and features: -- Model A270RP45. -- Handles both tractor and trailer. -- Back-On Style with standard Pivot and 110,000 Lbs. capacity. -- 70'-0" Deck Length, 63 deg. max. tilt angle (changeable from 45° to 63° range). -- "A-Frame" type Cylinder Mounts with a pair of 414 multi-stage Cylinders. -- Hydraulic Power Unit with (2) 50 HP Pumps for even and fast flow. -- NOTES: ● Only 3-4 Years of actual use. Site was sold making this machine available. ● There are two of these units available as indicated by the photos. See our listing number TD-010057 for the other. ● See also TD-0100058 and TD-0100059 for Walking Floor Receiving Bins originally supplied with these dumper units.
Equipment Location:SOUTHEAST
Bill Christoffersen
800-374-5009 ext:365
RADER Trailer Dumper with 30 Ft. Tipping Deck and comes with the following components and features: -- This unit was installed at the current location in approximately 1971 and is reportedly in great working order and condition. -- Previously used for Dumping Wood Chip Trailers. -- (2) Spare Rebuilt Tipper Lift Cylinders. -- Professional rigging and loading is available. Decks are often extended for longer (53 Ft.) trailers.OPTIONAL ADDITIONS: -- Product Receiving Bin with a holding capcity of 15 units (3,000 Cu. Ft.) and 3-strand H480 bottom Chain Discharge. -- A 30"x35" Feeder. -- 260 Ft. Belt Conveyor with 36" Belt. Conveying speed is 320 FPM. -- Please Call for pricing on these items.
Equipment Location:WEST COAST
Bill Christoffersen
800-374-5009 ext:365