• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
10 Results Found for Vacuum Pump Viewing 1 - 10 of 10 results
STANDARD LISTINGS
AGILENT / PVR PVL 400 VACUUM PUMP (OIL VANE): -- 15 HP - 1,750 RPM TEFC Direct drive motor, oil-flooded rotary vane vacuum pump with (10) liters or (10.5 Qts. of oil), 29.9 Hg/in at 285 ACFM. -- Pump has an integral oil supply, single-stage with air cooled oil re-circulated by means of differential pressure.
Equipment Location:EASTERN CDN
EX-FACTORY INC.
704-841-2001
BECKER VTLF 250 SK 10 HP cleaned and checked with new vanes:7.5 kW (10 HP) Oil-less (Dry) Rotary Vane Vacuum Pump System, 176 CFM, max. 25"Hg; Heavy Duty construction, compact design, small foot print. -- 100% Oil-less vacuum pumpIs virtually maintenance-free with built-in carbon vanes & built-in suction filters, vacuum regulating valve, secondary suction for additional cooling, blowoff valve/silencer; 2-1/2" BSP x 2" NPT nipple coupled to a TFC; 1,150 RPM motor.
Equipment Location:EASTERN CDN
EX-FACTORY INC.
704-841-2001
11 kW (14.75 HP) Oilless (Dry) Rotary Vane Vacuum Pump System, rated @ 250 CFM open flow, max. 22.5" Hg; Heavy Duty construction, compact design, small foot print. -- 100% Oilless vacuum pump is virtually maintenance-free with built-in carbon vanes and built-in suction filters, vacuum relulating valve. -- Complete with: Blow-off valve/silencer and vacuum dust canister. -- Note: Price is for each unit. There are (2) pumps available, and when you buy (2) you may get them with the stand.
Equipment Location:EASTERN CDN
EX-FACTORY INC.
704-841-2001
BECKER Model VTLF 500 "Oil-Free" Vane Vacuum Pump:25 HP Oilless (Dry) Rotary Vane Vacuum Pump System, rated @ 353 CFM open flow, max. 22.5" Hg; Heavy Duty construction, compact design, small foot print. -- Includes: 100% Oilless Vacuum Pump is virtually maintenance-free with built-in carbon vanes and built-in suction filters. -- Complete with:Vacuum regulating valve, secondary suction for additional cooling, blow-off valve/silencer, 4" BSP x 4" NPT nipple; coupled to a 1,150 RPM TEFC motor.
Equipment Location:EASTERN CDN
EX-FACTORY INC.
704-841-2001
KAESER FB 620 C Rotary Screw Vacuum Blower only 1,240 hours: 60 HP, 1,243 CFM at 15 Hg. The pump can achieve up to 99.9% vacuum. -- Comprehensive sensorsA wide range of sensors and switches for monitoring pressure, temperature, speed, oil level and filters ensures dependable blower operation and allows remote monitoring and visualization of operational status. -- Sigma Frequency Control (SFC)Using variable speed control, the SFC frequency converter adjusts blower performance to match application air demand. Everything is ready for immediate operation, since all programming and parameterization is performed at the factory.. -- Equipped with:Air cooled after cooler, TEFC electric motor EPAct compliant, soundproofing and vibration isolation mounts ensure low noise levels and smooth, quiet operation.
Equipment Location:MIDWEST
EX-FACTORY INC.
704-841-2001
KAESER OMEGA DB235 series 30 HP vacuum blower:513 ACFM, 15"HgV with the speed of 2,860. -- Long service life: Heavy-duty cylinder roller bearings completely absorb the continuously changing radial gas-forces that are exerted on the rotors. Service life of up to 100,000 hours is possible with the included bearings. -- High flow rate = High-efficiency: Thanks to precision manufacturing we achieve minimal flank clearance, which results in reduced capacity losses through gap losses.
Equipment Location:NORTHEAST
EX-FACTORY INC.
704-841-2001
Spencer Multi-Stage 40 HP Fabricated Centrifugal BlowerLIKE NEW, Never been installed or under powerMachine Specifications: -- 40 HP -- 3500 RPM -- 2250 CFM -- 100 AMPSpencer Multi-Stage 40 HP Fabricated Centrifugal Blower
Equipment Location:NORTHEAST
EX-FACTORY INC.
704-841-2001
TRAVAINI Dynaseal refurbished with (6) months warranty available:40 HP Travaini liquid ring, single stage vacuum pump "TRSC 100-700/C/F". Nominal capacity 500 ACFM @ 20" HgV; max Vacuum 27" HgV. -- Pump materials include.Cast iron housing, ductile iron impeller and stain less steel shaft. Shaft seals are carbon face with viton elastomers. -- 40 HP575 Volt, 3-Phase, 60 Hz, TEFC monoblock assembly for direct drive, no field alignment needed. -- Sealing fluid re-circulating system.includes reservoir of carbon steel with fluid level guage and drain, high efficiency discharge separator and over sized heat exchanger. -- High temp switch,To protect against over temp operation.- Complete with charge of Dynalube fluid. -- Suction line accessories includeinlet check valve, vacuum guage (0 - 30" HgV), inlet filter assembly, manual unloader valve and vacuum relief valve. -- Heat exchangerIs air cooler type made from aluminium and extended surface fins. -- Electrical controls include:Starter/overload reset, pump running light, hour meter, hi-temp light and terminal blocks, all mounted in a NEMA 12 cabinet. -- The entire systemIs test run at the factory for proper operation. -- Note:Electrical control can be changed to 460 Volt @ 52 amps for an additional cost of $900.
Equipment Location:EASTERN CDN
EX-FACTORY INC.
704-841-2001
Travaini TRO – 035S – 1A High Efficiency Liquid Ring Vacuum PumpModel: Serial No.: 2897-96Mft Date: 10/96Nominal Capacity ACFM: 35Motor HP: 3Maximum End Vacuum in Hg: 26Approximate Dimensions (in.) L x W x H: 38 x 17 x 40Approximate Weight (lbs.): 340Hours of Operation: ONLY 3,835 (has been in storage most of its life)Needs two seals and glass on one gauge replaced, which seller will have done prior to shipping unit.Manual and other technical information are available upon request.Travaini TRO – 035S – 1A High Efficiency Liquid Ring Vacuum Pump
Equipment Location:GREAT PLAINS
EX-FACTORY INC.
704-841-2001
40 HP "QSV1 Series" vacuum pump with only 2,153 hours:550 ACFM, 29.9"HgV, Direct drive rotary screw vacuum, positive lubrication fluid pump. -- Equipped with: Modulating inlet valve, temperature regulating valve, and high discharge temperature shutdown system with manual reset. -- Complete with: Control panel, electrical enclosure, gauges, exhaust separation system, spin-on fluid filter, and magnetic motor starter.
Equipment Location:NORTHEAST, AL
EX-FACTORY INC.
704-841-2001