• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
15 Results Found for Hogs and Wood Grinders Viewing 1 - 15 of 15 results
STANDARD LISTINGS
WEIMA Beaver 300 Slow Speed, High Torque Waste Grinder w/Vibratory Conveyor. 25 HP (18.5 kW), 10" rotor diameter, 11.8" (300 mm) rotor length, (14) 40 x 40 mm indexable, concave cutters.Equipped with: -- WRRL 300 12' Vibratory Conveyor (550 Lbs). -- The "Horizontal Beaver" receives the material from a vibratory conveyor system; from the conveyor, a feed roller system pinches and feeds the material into the rotor. -- Features: Patented "V-Rotor" design utilizes a V-groove rotor closely matched to grooves in the counter-knife; the V-Rotor produces uniform discharged material that is free of splinters and dedicates more horsepower to grinding. -- Includes integrated "plug-and-play" electrical control system with UL approved components; -- Extraction requirements: 1,900 CFM (28 MPS), 8" (200 mm) diameter for dust collection. Total Approx. weight of 2,430 Lbs.
Equipment Location:SOUTHEAST
Jim Reedy
800-374-5009 ext:455
WEIMA ECO 1 Vertical Hopper-Fed Low-Noise Grinder;Equipped with: 23" x 31" Hopper opening at the top, 1.1 cu. yds. capacity. -- 25 HP rotor motor, Patented "V-ROTOR" design utilizes a V-groove rotor closely matched to grooves in the counter-knife to ensure uniform discharge free of splinters, reduce friction, and dedicate more horsepower to grinding; rotor speed 60 - 100 RPM. -- Features: Hydraulic ram optimizes feed pressure by monitoring rotor motor amperage, lateral force on the ram is minimized by a unique "U-Joint" mounting system. -- Heavy Duty structural steel frame, welded construction; integrated "plug-and-play" electrical control system. -- Complete with: (14) Replaceable back bolt-on cutter knives, welded knife holders standard, recessed concave cutters with low clearance over the rotor extend cutter life, protect the bolts, and reduce machine wear. -- Includes: 6" Dia. dust collection outlet (1,200 CFM required); Will accept 3/8" - 2" interchangeable screens. (Output depending on screen size, material density, and moisture content).
Equipment Location:MID ATLANTIC
Jim Reedy
800-374-5009 ext:455
WEIMA TIGER 1000 Horizontal Grinder w/12' Vibratory Infeed ConveyorFactory Reconditioned in 2014 with very low hours since rebuild.This system feeds material into the rotor using a unique infeed pinch roll system in conjunction with a vibrating conveyor.Specifications & features: -- 39" x 6" Machine opening, 14" rotor dia., 39.3" rotor length, 620 RPM rotor speed, 75 HP motor, (44) Indexable 4-sided knives, Interchangeable screen, 10" dust outlet connection which requires 3,000 CFM. -- Complete with: Replaceable strips on infeed roll, plug and play control panel, sturdy frame design, low RPM, high torque, large volume of mixed scrap. -- New teeth – (40) hours on 1st of (4) rotations, new counter blades with (40) hours – reversible on one of two, new 2-1/4" screen with (80) hours; used 2-1/2" sceen in good condition. -- Includes: Auger chip removal and approx. 18' conveyor; control panel. -- 1,500-2,500 Lbs/Hr capacity depending upon material, 60-80 Yds per 8-hour day.
Equipment Location:SOUTHEAST
Jim Reedy
800-374-5009 ext:455
WEIMA TIGER 400 Horizontal Slow Speed Single Shaft Wood Grinder w/Vibratory Conveyor6" High (160 mm) x 15-11/16" (400 mm) wide max. infeed opening, 50 HP rotor motor, 14" dia. rotor grinds at 620 RPM (fixed rotor speed depending on application). -- Equipped with: Patented "V-ROTOR" design utilizes a v-groove rotor closely matched to grooves in the counter-knife to ensure uniform discharge free of splinters, reduce friction, and dedicate more horsepower to grinding. -- Features: (22) Replaceable back bolt-on cutter knives (welded knife holders standard, bolt-ons per customer request), recessed concave cutters with low clearance over the rotor extend cutter life, protect the bolts, and reduce machine wear. -- Infeed roller with replaceable wear strips for ease of maintenance, feed speed is controlled by monitoring the amp draw of the rotor, preventing "braking" or excessive pressure on the rotor, the vibratory infeed conveyor (12'), is also tied into the feed roll to eliminate binding. -- 9.85" (250 mm) Dia. dust collection outlet (3,000 CFM required). -- Includes: Heavy Duty low-profile frame (15-3/4" passline height); integrated "plug-and-play" electrical control system with UL approved components (system UL certification available upon request for additional charge); up to 16' vibratory infeed conveyor.
Equipment Location:SOUTHEAST
Jim Reedy
800-374-5009 ext:455
WEIMA WL-8 Low Noise Woodwaste GrinderEquipped with: 35 HP Rotor motor, 10" (368 mm) dia. rotor with (27) indexable, 4-sided serrated ram, replaceable cutter knives, rotor grinds at 80 - 100 RPM. -- Hydraulic feed ram that pushes the material to the rotor, 2" interchangeable sizing screen, 8" (200 mm) chip extraction outlet which requires 1,900 CFM. -- Complete with: "Plug and play" control console for easy installation. -- (1,335) Total operating hours.
Equipment Location:SOUTHEAST
Jim Reedy
800-374-5009 ext:455
WEIMA WLK-10 Vertical Hopper-Fed Low-Noise Grinder Equipped with: 39.4" x 47.2" Hopper opening at the top, 1.7 cu. yds. cap.; (3) sides straight with curved Front Wall. -- 50 or 60 HP rotor motor, 14-1/2" dia. Patented "V-ROTOR" design utilizes a V-groove rotor closely matched to grooves in the counterknife to ensure uniform discharge free of splinters, reduce friction, and dedicate more horsepower to grinding. -- 39.4" Long rotor operates at 60 - 120 RPM; equipped with (52) replaceable back bolt-on (4 x indexable) concave shaped cutter knives. -- Welded knife holders standard; recessed concave cutters with low clearance over the rotor extend cutter life, protect the bolts, and reduce machine wear. -- Features: WEIMA'S proprietary gearbox designed specifically for slow speed grinders. -- 8" Dia. outlet for material discharge via auger, conveyor, or pneumatic (1,900 CFM required required for pneumatic conveying); choice of 3/8" - 2" interchangeable screens to produce chips from 1/2" to 2" (Output depending on screen size, material density, and moisture content). -- Hydraulic ram optimizes feed pressure by monitoring rotor motor amperage, lateral force on the ram is minimized by a unique "U-Joint" mounting system. -- Heavy Duty structural steel frame, welded construction; integrated "plug-and-play" electrical control system with UL approved components (system UL certification available upon request for additional charge). -- Ground material output depending on screen hole size and material from 1,200-2,500 Lbs/Hr.; 3/4" holes is supplied standard screen hole size. -- Options: Flared hopper, material discharge auger; programmable logic controls and ram comb.
Equipment Location:SOUTHEAST
Jim Reedy
800-374-5009 ext:455
Vertical hopper fed Low Noise Grinder, 51-1/4" x 47-1/4" hopper opening (straight sided), 2.3 cu. yds. cap.; 14-1/2" dia. rotor with a rotation speed of 80 - 120 RPM; 75 HP motor with Soft start Star Delta Starter. -- Equipped with: Patented "V-ROTOR" design utilizes a V-groove rotor closely matched to grooves in the counterknife to ensure uniform discharge free of splinters; reduce friction, and dedicate more horsepower to grinding. -- (37) 4-way indexable, concave shaped cutter knives (welded knife holders standard, bolt-ons per customer request); recessed concave cutters with low clearance over the rotor extend cutter life, protect the bolts, and reduce machine wear. -- Drop out discharge, lift up door for easy purge cleaning when used in plastics application. 5/8" screen if used for "Animal Bedding", approx. 1,700 - 2,000 Lbs/Hr output. -- Hydraulic serrated ram optimizes feed pressure by monitoring rotor motor amperage, lateral force on the ram is minimized by a unique "U-Joint" mounting system, Hydraulic clutch enables motor to start with the hopper full. -- Features: Heavy Duty structural steel frame, welded construction; integrated "plug-and-play" electrical control system with UL approved components (system UL certification available upon request for additional charge). -- Recommended for plastic, paper or wood applications.
Equipment Location:SOUTHEAST
Jim Reedy
800-374-5009 ext:455
Vertical hopper-fed low-noise Grinder, 31-1/2" x 39" hopper opening at the top, 1.1 cu. yds. cap. -- Features: 30 HP rotor motor, Patented "V-ROTOR" design utilizes a V-groove rotor closely matched to grooves in the counterknife to ensure uniform discharge free of splinters, reduce friction, and dedicate more horsepower to grinding. -- Features: (14) Replaceable back bolt-on cutter knives, welded knife holders standard, recessed concave cutters with low clearance over the 10" dia. rotor extend cutter life, protect the bolts, and reduce machine wear. -- 6" Dia. dust collection outlet (1,200 CFM required); 3/8" - 2" interchangeable screens to produce chips from 1/2" to 2" (Output depending on screen size, material density, and moisture content); hydraulic ram optimizes feed pressure by monitoring rotor motor amperage, lateral force on the ram is minimized by a unique "U-Joint" mounting system. -- Includes: Heavy Duty structural steel frame, welded construction; integrated "plug-and-play" electrical control system with UL approved components (system UL certification available upon request for additional charge). -- Options: Flared hopper,log Spacer, 2nd row of knives, material discharge auger; programmable logic controls;
Equipment Location:SOUTHEAST
Jim Reedy
800-374-5009 ext:455
WEIMA WLK-4 Vertical Hopper-Fed, Low Noise Grinder 30 HP Motor w/hydraulic clutch, 10" (252 mm) dia. rotor grinds at 60 - 100 RPM.Specifications & features: -- 23-1/2" x 31-1/2" (600 mm - 800 mm) hopper opening at the top, 0.8 cu. yds. (0.6 cu. m) cap.; -- Patented "V-Rotor" design utilizes a V-groove rotor closely matched to grooves in the counter-knife to ensure uniform discharge free of splinters, reduce friction, and dedicate more horsepower to grinding.Equipped with: -- (14) Replaceable back bolt-on cutterknives, welded knife holders, recessed concave cutters with low clearance over the rotor to extend cutter life, protect the bolts and reduce machine wear. -- 8" Dia. chip collection outlet (1,900 CFM required); -- 1-1/2" interchangeable screen to produce chips at the approximate rate of 400 - 600 Lbs/Hr. -- Hydraulic ram optimizes feed pressure by monitoring rotor motor amperage, lateral force on the ram is minimized by a unique "U-Joint" mounting system. -- (1,153) Total operating hours. -- Machine will be fully refurbished and comes with a 6-month warranty. -- Photos are of actual machine with "demo plastic sight panels" installed that will be restored to factory panels. Inclined auger conveyor not included.
Equipment Location:SOUTHEAST
Jim Reedy
800-374-5009 ext:455
WEIMA WLK-6 Vertical hopper-fed low-noise Waste Grinder. -- Equipped with: 31-1/2" x 49" hopper opening at the top, 1.2 cu. yds. cap.; (3) sides straight with curved Front Wall. -- 30 HP rotor motor, 10" dia. Patented "V-ROTOR" design utilizes a V-groove rotor closely matched to grooves in the counterknife to ensure uniform discharge free of splinters, reduce friction, and dedicate more horsepower to grinding. -- 31-1/2" Long rotor operates at 80 - 120 RPM; equipped with (42) replaceable back bolt-on (4 x indexable) concave shaped cutter knives. -- Welded knife holders standard; recessed concave cutters with low clearance over the rotor extend cutter life, protect the bolts, and reduce machine wear. -- Features: WEIMA'S proprietary gearbox designed specifically for slow speed grinders. -- 8" Dia. outlet for material discharge via auger, conveyor, or pneumatic (1,900 CFM required required for pneumatic conveying); choice of 3/8" - 2" interchangeable screens to produce chips from 1/2" to 2" (Output depending on screen size, material density, and moisture content). -- Hydraulic ram optimizes feed pressure by monitoring rotor motor amperage, lateral force on the ram is minimized by a unique "U-Joint" mounting system. -- Complete with: Heavy Duty structural steel frame, welded construction; integrated "plug-and-play" electrical control system with UL approved components (system UL certification available upon request for additional charge). -- Material output from 1,000 - 1,250 Lbs/Hr (output is an average and can be influenced by density, material size, screen size, feeding form, and other); 1" standard screen hole size. -- Includes: A/B Programmable Logic Controller. -- Options: Flared hopper, material discharge auger.
Equipment Location:SOUTHEAST
Jim Reedy
800-374-5009 ext:455
WEIMA WLK-6S Vertical hopper-fed low-noise Waste Grinder. -- Equipped with: 31-1/2" x 49" hopper opening at the top, 1.3 cu. yds. cap.; (3) sides straight with curved Front Wall. -- 60 HP rotor motor, 10" dia. Patented "V-ROTOR" design utilizes a V-groove rotor closely matched to grooves in the counterknife to ensure uniform discharge free of splinters, reduce friction, and dedicate more horsepower to grinding. -- 31-1/2" Long rotor operates at 80 - 100 RPM; equipped with (42) 6replaceable back bolt-on (4 x indexable) concave shaped cutter knives. -- Welded knife holders standard; recessed concave cutters with low clearance over the rotor extend cutter life, protect the bolts, and reduce machine wear. -- Features: WEIMA'S proprietary gearbox designed specifically for slow speed grinders. -- 8" Dia. outlet for material discharge via auger, conveyor, or pneumatic (1,900 CFM required required for pneumatic conveying); choice of 3/8" - 2" interchangeable screens to produce chips from 1/2" to 2" (Output depending on screen size, material density, and moisture content). -- Hydraulic ram optimizes feed pressure by monitoring rotor motor amperage, lateral force on the ram is minimized by a unique "U-Joint" mounting system. -- Complete with: Heavy Duty structural steel frame, welded construction; integrated "plug-and-play" electrical control system with UL approved components (system UL certification available upon request for additional charge). -- Material output from 1,000 - 1,250 Lbs/Hr (output is an average and can be influenced by density, material size, screen size, feeding form, and other); 1" standard screen hole size. -- Includes: A/B Programmable Logic Controller. -- Options: Flared hopper, material discharge auger.
Equipment Location:SOUTHEAST
Jim Reedy
800-374-5009 ext:455
Vertical hopper-fed low-noise Grinder, 39" x 49" hopper opening at the top, 1.75 cu. yds. cap.; (3) sides straight with curved Front Wall. -- 35 HP (27 kW) rotor motor, 10" dia. Patented "V-ROTOR" design utilizes a V-groove rotor closely matched to grooves in the counterknife to ensure uniform discharge free of splinters, reduce friction, and dedicate more horsepower to grinding. -- 39.4" Long rotor operates at 80 - 120 RPM; equipped with (48) replaceable back bolt-on (4 x indexable) concave shaped cutter knives. -- Welded knife holders standard; recessed concave cutters with low clearance over the rotor extend cutter life, protect the bolts, and reduce machine wear. -- Features: WEIMA'S proprietary gearbox designed specifically for slow speed grinders. -- 8" Dia. outlet for material discharge via auger, conveyor, or pneumatic (1,900 CFM required required for pneumatic conveying); choice of 3/8" - 2" interchangeable screens to produce chips from 1/2" to 2" (Output depending on screen size, material density, and moisture content). -- Hydraulic ram optimizes feed pressure by monitoring rotor motor amperage, lateral force on the ram is minimized by a unique "U-Joint" mounting system. -- Heavy Duty structural steel frame, welded construction; integrated "plug-and-play" electrical control system with UL approved components (system UL certification available upon request for additional charge). -- Ground material output depending on screen hole size and material from 800 - 1,200 Lbs/Hr.; 5/8" holes is supplied standard screen hole size. -- Options: Flared hopper, material discharge auger; programmable logic controls and ram comb.
Equipment Location:SOUTHEAST
Jim Reedy
800-374-5009 ext:455
Vertical Hopper Fed, Low Noise Grinder, 31-1/2" x 57" hopper opening at the top, 1.2 cu/yd cap.; (3) sides straight with curved front wall. -- 36 HP (27 kW) rotor motor, 10" dia. Patented "V-ROTOR" design utilizes a V-groove rotor closely matched to grooves in the counterknife to ensure uniform discharge free of splinters, reduce friction, and dedicate more horsepower to grinding. -- 31-1/2" Long rotor operates at 80 - 100 RPM; equipped with (42) replaceable back bolt-on (4 x indexable) concave shaped cutterknives. -- Welded knife holders standard; recessed concave cutters with low clearance over the rotor extend cutter life, protect the bolts, and reduce machine wear. -- Features: WEIMA's proprietary gearbox designed specifically for slow speed grinders; choice of 3/8" - 2" interchangeable screens to produce chips from 1/2" to 2" (output depending on screen size, material density, and moisture content). -- Hydraulic ram optimizes feed pressure by monitoring rotor motor amperage; lateral force on the ram is minimized by a unique "U-Joint" mounting system. -- Heavy Duty structural steel frame, welded construction; integrated "plug-and-play" electrical control system with UL approved components (system UL certification available upon request for additional charge). -- Ground material output depending on screen hole size & material from 1,000 - 1,800 Lbs/Hr; 5/8" (12/15 mm) holes are the standard screen hole size supplied. -- Options: Top & Bottom serrated ram, hydraulic dropdown screen, slope structure, vaulted weld bead rotor protection, relocated hydraulics, and housing to protect from liquids. -- Startup training & assistance (1 - 2 days on-site) available. -- Warranty includes (12) months or (2,000) Hrs on parts, (6) months or (1,000) Hrs on labor (wear parts, travel and other expenses excluded).
Equipment Location:SOUTHEAST
Jim Reedy
800-374-5009 ext:455
WEIMA Woodchuck Low Noise Slow Speed Wood Waste Grinder:A low cost/investment solution for Woodwaste disposal - feasible for a small shop.Specifications: -- 25 HP Main Drive motor; 24" x 41" hopper opening; (28) 40 mm x 40 mm concave, indexable cuters; 6" discharge outlet. -- Features: Patented V-ROTOR design utilizes tooling closely matched to grooves in the counterknife. -- V-ROTOR Produces uniform discharged material, free of splinters and dedicates more horsepower to grinding.Integrated "plug-and-play" electrical control system with UL approved components.
Equipment Location:SOUTHEAST
Jim Reedy
800-374-5009 ext:455
Machine Number: 986 Machine Type: Grinder Wood Manufacturer: Weima Model #: HWV2500 Weima Model WoodWolf HWV 2500 System Includes WLK 14 Wood Grinder Hydraulic motor 4.4HP Number of knives 82 Rotor diameter 368mm (14.72") Estimated Output w/ 30mm Screen: 4,000 - 5,700 lbs/hr (Hardwoods) Truck loading conveyor included Belt width 590mm (23.6") Incline conveyor with lugs 20" apart Top unit model WoodWolf HWV 2500 Precrusher 60HP main motor Hopper opening 118" x 55" Shaft diameter 600mm (24") Weight 11,000 lbs Includes steel structure to support precrusher over WLK 14 grinder 75HP Main Motor
Equipment Location:Blowing Rock, NC
Carolina Used Machinery
828-773-2204