• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
124 Results Found for Mobile Wood Chipper Viewing 1 - 20 of 124 results
RECENTLY ADDED
PREMIUM LISTINGS
Well maintained Whole tree track chipper. 1900t by Bandit industries. Mostly used for ice storm clean up and ROW chipping.
Equipment Location:Madisonville, KY
Charbon Contracting
270-821-2742
1999 Morbark model 20, Total chip harvester, Cummins 475 HP, Three knife, New anvil knives, Counter knives, Excellent condition, many spare parts $80,000 OBO 570-640-7628
Equipment Location:Schuylkill Haven, PA
Reyn Mill Inc.
570-754-7628
Morbark 22RXL Whole Tree Chipper. Serial# 1533. 600 HP Cummins. Twin disc clutch. 500 hrs. on engine, clutch, and wear plate Peterson Pacific Flail Debarker. Serial# IDH97473. 3306 Caterpillar $98,000.00
Equipment Location:Hardinsaburg, KY
Snyder Timber LLC
270-617-2278
2004 Morbark 6036 W/Loader 70% tires $80000 936-591-1143
Equipment Location:Center, TX
H5 Farms
936-591-1143
2003 Precision model 2366 Chipper, 23” capacity 3 knife design, enclosed cab, 700 HP Cummins Diesel Engine, pilot controls with reversible Saw Buck. Various spare parts included. Call Lescher Tree Care & Land Clearing, Inc. 440-930-8744
Equipment Location:Avon Lake, OH
Lescher Tree Care
440-930-8744
2006 Precision Husky 2366, 8000 hrs , 3412 Cat 900 hp pro heat, Extra Knives, New Belts, Lost Contract 70,000.00 OBO 724-657-7532
Equipment Location:New Galilee, PA
mjs hardwoods
724-657-7532
STANDARD LISTINGS
2012 Peterson 7900EL Chipper - CAT C32 Tier 2 Engine - 1,125 Horsepower - 1,978 Hours - 5th Wheel Hitch - Extras - Very Good Condition
Equipment Location:Largo, FL
Apollo Equipment
503-585-1442
Bandit Model 2400 is ready to go to work on your job site. - New feed rollers (less than 500 tons) - New clutch June of 2016 - 897 Frame hours - 100 hours on new engine(replaced under warranty) - 25" disc - Currently chipping for paper chips and produces 90% useable chips.
Equipment Location:Grandville, MI
Integrity Truck & Equipment
844-483-7253
Used Bandit Chipper for Sale Model 254 2001- Brush Bandit Model 254XP, 600hours, John Deere 125HP motor, Winch with new cable and hook, Extra wide rear feed, Auto Feed, extra knives, Garage kept, New condition $30,000, Ask for Joe 203-619-2151. (Not owned by or represented by CRD METALWORKS LLC. Listing is as a courtesy to a client. No expressed or implied warranties by CRD METALWORKS LLC, nor can CRD METALWORKS LLC be held liable for any damages rekating to the purchase, delivery, use or transfer of this product.)
Equipment Location:Williamsburg, MA
CRD Metalworks
888-667-8580
2009 Brush Bandit 2090 Track Chipper JD 375 HP, 3100 Hrs., New Clutch 500 Hrs Ago, some extra parts, Machine is in Excellent Condition, Deal For $165,000 John 203-996-9522 CT
Equipment Location:Bethany, CT
Ciola Services Inc
203-393-3711
2012 Bandit 2290 Track Chipper w/Boom - 350 horsepower CAT engine - Excellent condition.
Equipment Location:Largo, FL
Apollo Equipment
503-585-1442
NEW LISTING 2010 Bandit Model 2290 Whole Tree Chipper, Caterpillar C-13 440 HP Turbo Diesel Engine with 2,700 Hours, 11' Infeed Chain, Hydraulic Stabilizers, Radio Remote Control and Tether Control, Tandem Axle with Air Brakes, Pintle Hitch, UCC Lights, Autofeed System, Rotating Discharge with Chip Deflector Hydraulic Flow Regulator for infeed speed, Machine is In Excellent Condition
Equipment Location:Stokes, NC
Granite Heavy Equipment Sales
603-569-7727
Bandit Model 1400 Track Chipper. Cat 210HP engine, 14" capacity, EROPS w/heat, Pilot controls, 2 knife disc and undercarriage is in good shape.
Equipment Location:Grandville, MI
Integrity Truck & Equipment
844-483-7253
LISTING 2013 Brush Bandit Model 1850HD Chipper, Equipped with a John Deere 325HP Turbo Diesel Tier 3 ONLY 300 HOURS,, Twin Disc Clutch,Autofeed Reverse Hydraulic Tongue Jack, Hydraulic Swivel Chute, Hydraulic Flapper on end of discharge chute, Hand Crank Height Chute, Hydraulic Lift Cylinder, Hydraulic Winch, Pintle Hitch, Tandem Axles with 12 volt electric brakes and UCC Lights, Machine Sells New for $167,000
Equipment Location:NJ
Granite Heavy Equipment Sales
603-569-7727
2005 Brush Bandit 1850HD Tree Chipper with a Cummins 250 HP Turbo Diesel, Hours Unknown, Tandem Axle, 12 Volt Brakes, Ucc Lights, Hydraulic Swivel Discharge Chute, Hydraulic Lift Cylinder, Tongue Jack, Knuckleboom Loader with Rotobec Grapple, Swing Out Control Console, Autofeed,
Equipment Location:NC
Granite Heavy Equipment Sales
603-569-7727
1992 Bandit 1900 Whole Tree Chipper w/Loader - 425 horsepower CAT 3406 engine - Extra knives, tools - Very good condition. Notes: Dual front hydraulic jacks/stabilizers; 100+ gallon fuel tank; New throttle motor; Built on air compressor & tank; Hydraulic chute rotation & chip deflector; New loader rotation motor; 4 roller infeed system; New infeed motors on vertical rollers; Loader has approx 21 ft reach; Rotobec grapple.
Equipment Location:Largo, FL
Apollo Equipment
503-585-1442
Track Disc chipper Cat Under Carriage 475 hp Cummins Diesel One owner Well maintained!
Equipment Location:Columbus, OH
Columbus Equipment Company
937-424-7678
98 Bandit 1900- Mobile tracked chipper, closed cab w/heat, air and pilot controls, loader with Rotobeck grapple, tracks and U/C 80%, 450hp Cat power unit, new Lexan in the front and both side windows.............
Equipment Location:Muddlety, WV
X-S Iron
304-872-2988
2006 Bandit Model 1900 Whole Tree Chipper, Caterpillar C-15 575 HP Turbo Diesel Engine with 5,900 Hours, WIreless Remote Control, Autofeed,,New Bearings on Feed Wheel, New Belly Band, New Transition Chute, New Liners and Face Plate and Disc., New Knife Holders, New Side Wall Replaced Discharge Chute, Installed 2nd Bottom Feed Great Running Condition
Equipment Location:NC
Granite Heavy Equipment Sales
603-569-7727
BANDIT 3090 Whole Tree Chipper; John Deere 600 HP - Tier 3; HP600 Hydraulic Cluth; Reversible Fan, Self Contained Air Compressor, (8) 11R x 22.5, 16 ply tires mounted on 10-bolt steel dual rims; Slide box (chain driven) feed system, 6331 Hours $139,900
Equipment Location:Florence, AL
Oakley Equipment Sales & Rentals
256-766-5488