BioMass Equipment For Sale
607 Results Found
1” thick blade carrier with serrated edge 27-35 GPM HIGH FLOW HYDRAULICS 4 double-sided blades BLUE DIAMOND 72" SEVERE DUTY BRUSH CUTTER SSL INTERFACE
SALE PENDING
1995 CBI ROAD MILL 2,645 TOTAL HOURS RECENT BELTS FOLDING DECK GOOD TIRS GOOD MILL WORK READY FINANCING AVAILABLE WITH NO MONEY DOWN GRANITEHE.COM
Call for Price
2016 CBI 6800 Track Horizontal Grinder, 1000 hp Cat diesel, Radio Remote, Magnetic Head Pulley, Work ready. Weight 86,500lbs Transport length 43’2” Transport width 11’1” Transport height 12’ Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
Call for Price
$ 1,089,000
CAT C27 TIER 4F DIESEL ENGINE (1050 HP) PT TECH HPTO15 HYD CLUTCH AUTO REVERSING FAN SYSTEM 40" X 60" HAMMERMILL (24 HAMMER PATTERN) FORGED DRUM OFFSET HELIX ROTOR 8" ROTOR SHAFT, 3.75" THICK, 5400LBS 40" TOP COMPRESSION FEED ROLL LIVE FLOOR W/4 WDH-120 CHAINS, 6 STRANDS WIRELESS REMOTE AND TETHERED REMOTE 60" DISCHARGE STACKING CONVEYOR 16' DISCHARGE HEIGHT UNDERCARRIAGE 700MM TRIPLE GROUZER MAGNETIZED END PULLEY W/COLLECTING SLIDE TRAY CBI MDS - METAL DETECTION SYSTEM
Call for Price
2005 CBI 6800T Track Horizontal Grinder, Cat 3412 Engine with 1000 HP, Only 7,566 Hours, Undercarriage is 80% Wireless Remote Control, Few Hundred extra Teeth, Discharge Conveyor with Magnetic Pully, No Compressor, Ready for Grinding. Transport width: 11' 1" Transport length: 43’-2” Weight 89,500lbs - 95,000lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
$ 700,000
2016 CBI 5800 Horzontal Grinder with 728 hours on a Cat C-18 Engine with 570HP includes Colorizer and spray bar. Weight 69,000lbs - 73,000lbs Length: 38’ 11” Width: 8’ 4” Height: 12' Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
$ 889,000
CAT C18 TIER 4F DIESEL ENGINE (765 HP) AUTO REVERSING FAN SYSTEM 48" WIDE x 40" DIAMETER HAMMERMILL FORGED DRUM OFFSET HELIX ROTOR 6" ROTOR SHAFT 48" WIDE X 30" DIAMETER TOP COMPRESSION FEED ROLL LIVE FLOOR W/4 WDH-120 CHAINS, 4 STRANDS WIRELESS REMOTE AND TETHERED REMOTE 48" DISCHARGE STACKING CONVEYOR 15'4" DISCHARGE HEIGHT UNDERCARRIAGE TRACKED MAGNETIZED END PULLEY W/COLLECTING SLIDE TRAY CBI MDS - METAL DETECTION SYSTEM
Call for Price
Nice CF Nielson BP5500 Press. The plant shut down in 2014. The machine was run again for a test in 2016 and everything was in good working condition. They have the dies and pistons to make round and octogonal logs. - Briquetting press CF Nielsen BP5500 - Dies to make 3’’ round logs and 2½’’ octogonal logs - Lignin dosing system - Water pump to add water if material too dry - Home-made automatic speed adjustment with encoder. - Briquette breaker from CF Nielsen at the end of the cooling line - Home-made flying saw with lenght asjustment at the end of the cooling line too with capability to switch from the saw to the breaker. - Can run up to 1200kg (even 1400kg I think) per hour depending on material and briquette shape - Cooling line can be opened to make pucks also. - 575V AC motors - Installed in 2008 - 10,865 hours
$ 35,000
Champion 250HP Hammer Mill -Includes Air Base -New Hammers -Completely Refurbished -Excellent Condition -150HP Also available for $30,000
Call for Price
COMPLETE CHANTLAND 4234 LOOSE BAGGING SYSTEM4234 BELT-WEIGH BAGGER Including the following: -- Load Cell Weighing with "5511" Weighmeter Controller -- Color Touch Screen 5.4" size -- Single or Dual Set Point -- Calibration Routine -- Zero Tracking - Weigh Track -- Multiple Product Set-Up w/Quick Change over- (100) products -- RS-232, RS 422 Ethernet TCP/IP Connection -- NEMA 4X Poly Enclosure 16" x 14" -- Three Level Password Protection -- Requires Dedicated 120V /60 Cycles service -- Two Stage Variable Speed Control for Bulk Feed & Dribble Cut off by Weight Using VFD -- Flapper Style product Stop Gate for Positive Product Cut-Off -- Discharge Dust Collection Chute -- Spiked Agitator Above Inlet, with Drive, -- An Agitator Stirs the Product and Helps Deliver Product to the Belt. -- Surge Bin, Mounts to Flange of Packer, with Removable Lid, Inlet Flange and Dust Flange in Lid -- Approximately 10 Cubic Foot Capacity with Threated Ports for Customer Supplied Bin Level IndicatorsAP100 Automatic Bag Placer -- Bag Face 13-19 Inches -- Bag Length 24 Inches and up to 40 Inches Long -- Material of Bag Construction; Kraft Paper, Poly Plastic, Woven -- Gusseted Bags 5-1/2" Wide Gussets -- Upgrade to VEE Spout Clamp for AP10000FISCHBEIN "400NS" PLAIN SEWN CLOSURE SYSTEM -- This heavy-duty, state-of-the-art plain sewing system is designed for semi or fully automated bagging operations. -- The 400NS is specifically made for medium to high volume bagging applications that will require operating speeds up to 55 linear feet per minute @ 2.5 stitches per inch. -- This versatile unit will securely sew close woven polypropylene, multi-wall paper, and jute bags. -- Includes an infeed and standard unit is Right to Left travel.Standard features include: -- Empress model "100" two thread sewing head @ 2.5 stitches/inch -- Adjustable height high speed pedestal with casters. (31-56 inches) D4380 15" infeed -- Air thread pusher -- PLC controlled pneumatic actuators -- 24 VAC control circuit / 24 VDC solenoid valve controls,1HP, 1750 rpm motor 230 VAC single phase, or 230/380/460/575 VAC 3 PH -- NEMA 12 Electrical Components -- 180 Days System WarrantyNOTE: Minimum 6" of bag free top required
Call for Price
COMPLETE CHANTLAND 4234 LOOSE BAGGING SYSTEM4234 BELT-WEIGH BAGGER Including the following: -- Load Cell Weighing with "5511" Weighmeter Controller -- Color Touch Screen 5.4" size -- Single or Dual Set Point -- Calibration Routine -- Zero Tracking - Weigh Track -- Multiple Product Set-Up w/Quick Change over- (100) products -- RS-232, RS 422 Ethernet TCP/IP Connection -- NEMA 4X Poly Enclosure 16" x 14" -- Three Level Password Protection -- Requires Dedicated 120V / 60 Cycles service -- Two-Stage Variable Speed Control for Bulk Feed & Dribble Cut off by Weight Using VFD -- Flapper Style product Stop Gate for Positive Product Cut-Off -- Discharge Dust Collection Chute -- Spiked Agitator Above Inlet, with Drive, -- An Agitator Stirs the Product and Helps Deliver Product to the Belt. -- Surge Bin, Mounts to Flange of Packer, with Removable Lid, Inlet Flange and Dust Flange in Lid -- Approximately 10 Cubic Foot Capacity with Threaded Ports for Customer Supplied Bin Level IndicatorsAP100 Automatic Bag Placer -- Bag Face 13-19 Inches -- Bag Length 24 Inches and up to 40 Inches Long -- Material of Bag Construction; Kraft Paper, Poly Plastic, Woven -- Gusseted Bags 5-1/2" Wide Gussets -- Upgrade to VEE Spout Clamp for "AP10000" -- PLASTIC BAG IMPULSE SEALER
Call for Price
Call for Price
CB Package Boiler Natural Gas, CBI 700-300-15, Max Pressure 15st PSI, Input 12.600.000 BTU/HR Serial# OL 094585, 460 3Phase
$ 285,000
CME R150 Complete Pellet Manufacturing LineComplete line with Pellet mill, Conveyor, Biomass heating, Drying tunnel, and Bagging systemPelletizer -- Pellet Mill CME, Model Millennium R150 (200 HP) -- R150 Roll assembly narrow -- R150 1872 Stainless Steel Conditioner -- Stainless Heavy Duty Force Feeder -- Stainless feeder -- PM8300 Lubricator -- R150 Magnet Dryer and Feeding system -- Drying system (chips & sawdust dryer) 1 ton/hour capacity with infeed system, biomass burner, rotary drum and air discharge fans and controls -- Feed bin (take material from dryer offshoot and feed to grinder -- Mulch dump station (dump hopper for 3-yard bucket -- Bagging line 2, double-ended conveyor with bulk bag scale and frame one end and pellet hopper and 10 - 100 Lbs bag filler (manual) End bagging table andheat sealer for poly bags. -- Includes (1) end-of-line conveyor from the pellet miii cooler. -- 55 HP (600 V) wood grinder with a cyclonic blower to the silo. Takes chips 1"; minus under 12% moisture. 1/4" screen -- Feed silo for wood with integrated mixing arm and two auger ports for outfeed to mill -- Triple-headed roller set with high heat bearings and hardened steel roller -- Automatic greasing system for the main bearings for the rollers and shaft -- Auxillary small feed bin hopper with integrated gear-driven mixer and feed auger.
$ 325,000
CUMMINS B4.5 STAGE V (173HP) 4 PUMP HYDRAULIC SYSTEM 12 VOLT ELECTRICAL SYSTEM 78.5 GAL FUEL TANK 29 GAL HYDRAULIC RESERVOIR SEALED AND GREASED, D3 CHAIN 22” SINGLE GROUSER TRACK PADS WITH MUD HOLES TWO SPEED HYDRAULIC MOTORS PUSH BUTTON CAB LIFT BACK UP CAMERA AM/FM BLUETOOTH RADIO HYDRAULIC OIL FILLER PUMP AIR SUSPENSION SEAT ROPS/FOPS/OPS CERTIFICATION 12 VOLTS DC OUTLET ELECTRICAL SYSTEM WITH BREAKERS IN DASH STANDARD 15,000LB WINCH FAE 140U 200 MULCHING HEAD
$ 205,000
$ 349,000
2019 CMI 300 Mulcher, Cat Engine with 1600 hrs. Good undercarriage, FAEmulching head… MACHINE Overall Length: 197 inches Ground Clearance: 19 inches Overall Height: 116 inches Overall Tractor Width: 89 inches MULCHER Overall Width Attachment: 107 inches Working Width: 89 inches Overall Height (pushbar fully retracted): 64 inches Total Weight (Crawler & Mulcher): 28,840 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
$ 349,000
2019 CMI 300 Mulcher, Cat Engine with 1600 hrs. Good undercarriage, FAE mulching head… MACHINE Overall Length: 197 inches Ground Clearance: 19 inches Overall Height: 116 inches Overall Tractor Width: 89 inches MULCHER Overall Width Attachment: 107 inches Working Width: 89 inches Overall Height (pushbar fully retracted): 64 inches Total Weight (Crawler & Mulcher): 28,840 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
Call for Price
2020 CMI C300 Forestry Mulcher with 3,100 hours Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.