• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
18 Results Found for Wrap and Packaging Viewing 1 - 18 of 18 results
STANDARD LISTINGS
COMIL STAR 200B Shrink Wrap System for Case Goods. -- Product is automatically carried to unwinding unit for top & bottom wrapping application with foil/film, welding/cutting of film after product passes through foil application station. -- The loosely wrapped product is transferred to the Tunnel for film heat shrinking; the edge pressing rollers at the outfeed of the tunnel collect the excess film, while they apply the final side/edge pressure. -- Wrapping Station: PE Shrink film infeed & middle belt conveyors with inverter driven independent geared motors, (1) upper & (1) lower motor for film unwinding & welding bar movement, welding bar driven by toothed belt. -- Working Dimensions: Welding bar length is 3,300 mm, upper foil roll max. width is 2,150 mm (84-1/2"), lower foil roll max. width is 1,450 mm (57"). -- Feed belt width is 1,500 mm, infeed & middle conveyor is 2,400 mm long, max. working height is 300 mm; working table height is 800 mm; variable belt conveyor speed from 3 - 15 MPM by inverter; free-standing control panel. -- Heat Tunnel: Welded sheet metal structure, insulated cavities for minimum heat loss; (2) heating units with armored electric resistance, centrifugal fans for uniform heat distribution. -- Teflon Coated mesh conveyor belt transport heating tunnel, gear motor driven by inverter; spring loaded edge pressing unit at outfeed end of tunnel to press overhanging film. -- Shrink tunnel length is 4,700 mm, mesh conveyor is 4,700 mm (185") long x 1,800 mm (70-3/4") wide, tunnel will accept 300 mm (11.8") max. part height, working table height is 800 mm. -- Variable mesh belt conveyor speed from 3 - 15 MPM (10 -49 FPM) inverter; outfeed conveyor with powered driven rollers, speed control by inverter for cooling down the items after shrink wrapping. -- Equipped with: SIRIO Welding Station; actual model is "New Star 200B". -- Total power requirement of 86 Amps, 60 Hz, 50 kW on 600 Volt, 3-Phase. --
Equipment Location:EASTERN CDN
Bernie Straple
704-841-2001 ext:339
COMIL STAR 200B Shrink Wrapper for Case Goods. -- Product is automatically carried to unwinding unit for top & bottom wrapping with film, welding / cutting of film on the rear part of the product is performed. -- Wrapped product is then transferred to the tunnel for film shrinking, the edge pressing rollers at the out-feed of the tunnel, collect the excess film and press it against the shrink wrapped product. -- Wrapping station: PE shrink film in-feed & middle belt conveyors with inverter driven independent geared motors, (1) upper & (1) lower motor for film unwinding & welding bar movement, welding bar driven by tooth belt. -- Working Dimensions: Welding bar length is 3,300 mm, upper foil roll max. width is 2,150 mm, lower foil roll max. width is 1,450 mm. -- Feed belt width is 1,500 mm infeed & middle conveyor is 2,400 mm long, max. working height is 300 mm, working table height is 800 mm, variable belt conveyor speed from 3 - 15 MPM by inverter, free standing control panel. -- Heat tunnel: Welded sheet metal structure with insulated cavities for minimum heat loss, (2) heating units with armoured electric resistance, centrifugal fans for uniform heat distribution. -- Teflon coated mesh conveyor belt, gear motor driven by inverter, spring loaded edge pressing unit at out-feed end of tunnel to press overhanging film. -- Shrink tunnel length is 4,700 mm, mesh net conveyor is 4,700 mm long x 1,800 mm wide, tunnel will accept 300 mm max part height, working table height is 800 mm, variable mesh belt conveyor speed from 3 - 15 MPM by inverter, out feed conveyor with powered driven rollers & speed control by inverter for cooling down the items after shrink wrapping. -- Sirio welding station. -- Actual model is "New Star 200B". -- Total power required 86 AMPS, 60 Hz, 50 Kw on 600 volts 3-Phase.
Equipment Location:EASTERN CDN
Bernie Straple
704-841-2001 ext:339
Shrink tunnel by DAMARK packaging systems -- Features 14" wide x 84" long x 12" high working tunnel opening (actual opening is slightly larger); live roller conveyor with 5/8" diameter polymer cover rollers on 1. 5" centers x 14" wide x 32" long with variable speed drive, (2) omron digital temperature controller (tunnel tested to 190 degrees c), heating and power indicator lights, main circut breaker, painted steel construction, manually operated tunnel height adjustment moves conveyor from 32 to 37" flooor height, 1/4 horsepower conveyor drive motor and mounted on casters with four interconnected legs.
Equipment Location:MTN/CENTRAL CDN
Bernie Straple
704-841-2001 ext:339
LANTECH Q-300 Semi-Automatic Stretch Wrapper w/ Low Profile TurntableSemi-automatic operation whereby operator starts wrap cycle & with the Patented XT Cut & Clamp the machine automatically captures stretch film and cuts it at the end of the cycle wrap. Production speed 25 - 35 loads per hour. -- Maximum load size: Diagonal 72", height 110", weight 4,000 lbs., w / a 65" low profile turntable. -- Equipped with: 0.75 HP DC driven variable speed turntable (0 - 12 RPM), 3-3/8" . Power-roller stretch system - 200%. -- Maximum versatility for larges wraps, tall, heavy or fragile loads. -- "Micro-Controller" programmable control governs operation.
Equipment Location:MIDWEST
Bernie Straple
704-841-2001 ext:339
LANTECH Q-200 Semi-Automatic Stretch Wrapper w/ Low Profile TurntableSemi-automatic operation whereby operator starts wrap cycle & with the Patented XT Cut & Clamp the machine automatically captures stretch film and cuts it at the end of the cycle wrap. Production speed 25 - 35 loads per hour. -- Maximum load size: Diagonal 72", height 80", weight 4,000 lbs., w / a 65" low profile turntable. -- Equipped with: 0.75 HP DC driven variable speed turntable (0 - 12 RPM), 3-3/8". Ramp for loading with pallet jack. Power-roller stretch system - 200%. -- Maximum versatility for larges wraps, tall, heavy or fragile loads. -- "Micro-Controller" programmable control governs operation.
Equipment Location:MIDWEST
Bernie Straple
704-841-2001 ext:339
Shink Wrap Machine. This machine is a Mullen Yellow Jacket 110 shrink wrap machine. Item #00662
Equipment Location:Sturgeon Lake, MN
L & L Sales
218-372-4232
ORION M-67 Semi-Automatic Rotary Arm Stretch WrapperThe M-67 model semi-automatic stretch wrapper rotates the film carriage around a stationary load. Ideal for unitizing the most difficult loads, including those that are extremely heavy, light, fragile or unstable. Structural steel construction for durability. -- Variable speed tower up to 16 RPM, DC controlled. Deadman start / stop controls. -- Maximum load size 48" L x 48" W x 80" H. Heavy-duty chain and sprocket drive. Ultra low wrap to within 1.5" of floor. Wrap 35 - 50 loads per hour. -- Film size 20" with 100% to 300% stretch with 200% being the standard. -- Includes: Push button and dial controls and personnel guarding.
Equipment Location:MIDWEST
Bernie Straple
704-841-2001 ext:339
ORION M-67 Semi-Automatic Rotary Arm Stretch WrapperThe M-67 model semi-automatic stretch wrapper rotates the film carriage around a stationary load. Ideal for unitizing the most difficult loads, including those that are extremely heavy, light, fragile or unstable. Structural steel construction for durability. -- Variable speed tower up to 16 RPM, DC controlled. Deadman start / stop controls. -- Maximum load size 48" L x 48" W x 80" H. Heavy-duty chain and sprocket drive. Ultra low wrap to within 1.5" of floor. Wrap 35 - 50 loads per hour. -- Film size 20" with 100% to 300% stretch with 200% being the standard. Includes: Allen-Bradley Micrologix 1000 controller and non OEM fence packaging.
Equipment Location:SOUTHEAST
Bernie Straple
704-841-2001 ext:339
ORION M-55 Rotary Tower Automatic Stretch WrapperORION 4-leg super-stable design, has become one of the top sellers for ORION. The Insta-Thread film delivery system faces the side for easier film loading and threading. Specifications: -- Rotation Speed: 18 FPM -- Production capacity: 50-60 loads per hour -- Maximum load size: 48" x 48" -- Load Height: 15" min. max. 80" -- Conveyor width 48", height 22.5" Includes and Equipped with: -- Approx. 50' of powered 2-strand chain conveyor and powered roller conveyor. -- Pneumatic film clamp and cut. -- Variable up/down film carriage speed, variable film tension with auto package height adjustment. Independent top and bottom wrap counts: 1 to 3 wraps each. -- Allen-Bradley SLC 5/04 controller. -- Closing safety gates when load is being wrapped.
Equipment Location:MIDWEST
Bernie Straple
704-841-2001 ext:339
This SBA 800 is a ring wrapper feed trough type. -- Inside ring diameter 12". -- Ring rotation from 5 to 75 RPM. -- Automatic film clamp cutter. -- Conveyor forward/reverse switch. -- Ring and Frame specification: Precision machined steel carriage support ring; Friction drive, two urethane wheels; Acrelyc safety guards restric access to wrap zone; Electrical safety interlocks to power off the machine when access door are open.
Equipment Location:EASTERN CDN
Bernie Straple
704-841-2001 ext:339
SAMUEL SOA-725 / 18 Orbital Stretch Wrapper. Used for long or lean shaped packages. Unit can be programmed for banding only or a full "cocoon" wrap around the product. -- Unit Includes; 18" diameter wrapping ring for a max. package 10" x 10". Powered in-feed and out-feed conveyors, 6" W x 36" L each. -- Available; (38) rolls of stretch wrap and (2) roller tables for each end, at an extra cost.
Equipment Location:ATLANTIC CDN
Bernie Straple
704-841-2001 ext:339
SHANKLIN T-72 Heat Shrink Tunnel. Dual Chamber Heat Tunnel. -- Includes; (2) .75 HP blowers. Separate side mounted control panels w/ E-Stop control. Mesh conveyor belt, height 40" (adjustable), width 15", overall length 130" height 40". -- Overall heat tunnel opening 9" H x 22" W. -- Adjustable temperature range from 50 - 500 degrees.
Equipment Location:MIDWEST
Bernie Straple
704-841-2001 ext:339
Heavy duty powered rotating platform •Industrial turntables •Platform size is 50" wide by 98" long •Large diameter ring gearElectric gear motor to rotate table topTables can be painted white •Top platform metal plate 3/8" thick •Platform frame is 6" X 6" square tube •Several platforms available •Call for a delivered price 1/2HP Sew-Eurodrive, 230/460volt The YouTube video shows one of the turn tables (painted white) manually rotating, we removed the gear box so we could use it manually
Equipment Location:Toledo, WA
Machinery Scene
360-864-2800
Portable Wrap Station
Equipment Location:Beaver, WA
LPS Equipment & Acquisition Co.
731-986-4351
Wulftec Futura 2000 Auto Shrink Wrapper
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
WULFTEC Pallet Stretch Wrapper model "WLP-300": -- Extra Heavy-duty base structure. -- 20" Powered pre-stretch carriage with 50% to 300% pre-stretch. -- Dual # 50 chain carriage lift for increase safety and durability. -- High production rates of 40 - 50 loads per hour. -- Load weight capacity up to 6,000 Lbs. -- Load size 56" X 56" X 80" high. -- 1/2 HP AC motor with variable frequency drive for corner compensation. -- Separate up and down carriage speed. -- Integrated scale. -- Overall dimension: 103" height, X 158" depth X 72" wide.
Equipment Location:EASTERN CDN
Bernie Straple
704-841-2001 ext:339
WULFTEC WHP-200 Stretch Wrapper w/ Turntable Heavy-Duty high-profile pallet wrapping machine that is designed to be a workhorse. Wulftec builds the most rugged pallet wrapping machinery in the world. Designed to handle up to 25 loads per hour. Ideal for companies that will be loading with forklifts. This machine is forklift portable. It will take you less than 5 minutes to move this machine from one location to another. -- Specifications: -- Maximum load size 56" W x 56" L x 76" H -- Maximum load capacity 4,000 lbs. -- Auto-height sensing photo-eye with on/off switch -- 20" No-Thread Powered Pre-stretch -- Variable Pre-stretch Percentage -- Separate up and down carriage speeds -- Separate top and bottom wrap selectors (0-9) -- Reinforced wrap/manual rotation control -- Film force to load control -- Turntable- 52" X 52" X 3/8" formed steel octagonal table. -- Variable Turntable Speed (0-12 RPM) -- 13-1/2" table height from floor -- Push button and selector switch operation
Equipment Location:SOUTHEAST
Bernie Straple
704-841-2001 ext:339
WULFTEC WHP-200 STRECH WRAPPER -- Semi-Automatic Octagon Turntable -- 14" Above the floor -- 51" Diameter turntable -- 40 to 50 Loads per hour -- Load size; 56" wide x 56" long x 76" tall -- Load weight 4,000 lbs -- Separate up and down carriage size -- Top cover pause switch -- Auto height sensing photo eye with on/off switch -- 20" Powered pre-stretch carriage -- Shipping dimensions; 123" high x 51" wide x 111": long (can knock down) -- New DC motor controller for film carriage
Equipment Location:SOUTH
Bernie Straple
704-841-2001 ext:339