1998 Doucet DX60 DG & MP 32 Jointer and Finger Jointer$68,500

Contact Information

 
  

EX-FACTORY INC.

1805 Sardis Road N
Charlotte, NC 28270
Map ItPrint It

  

704-841-2001

  

View Seller's Entire Inventory and Information

Contact Seller

  
 
 
 
 
   
 
By using this service, you accept the terms of LumbermenOnline.com Visitor Agreement.

Captcha
Click refresh if text is not readable.  
 
Enter the text exactly as it is shown above. 
 
  
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=46131&FILE=THMB_FJ-0106271.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=46131&FILE=THMB_FJ-0106272.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=46131&FILE=THMB_FJ-0106273.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=46131&FILE=THMB_FJ-0106274.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=46131&FILE=THMB_FJ-0106275.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=46131&FILE=THMB_FJ-0106276.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=46131&FILE=THMB_FJ-0106277.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=46131&FILE=THMB_FJ-0106278.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=46131&FILE=THMB_FJ-0106279.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=46131&FILE=THMB_FJ-01062710.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=46131&FILE=THMB_FJ-01062711.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=46131&FILE=THMB_FJ-01062712.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=46131&FILE=THMB_FJ-01062713.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=46131&FILE=THMB_FJ-01062714.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=46131&FILE=THMB_FJ-01062715.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=46131&FILE=THMB_FJ-01062716.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=46131&FILE=THMB_FJ-01062717.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=46131&FILE=THMB_FJ-01062718.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=46131&FILE=THMB_FJ-01062719.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=46131&FILE=THMB_FJ-01062720.jpg" />


EQUIPMENT DETAILS


  • Year:1998
  • Make:Doucet
  • Model:DX60 DG & MP 32
    Location:EASTERN CDN,
  • Stock Number:FJ-010627

 

EQUIPMENT DESCRIPTION

 

DOUCET DX 60 DG Finger Jointer Line for Medium ProductionThe "DX 60 DG" automatic feed Finger Jointer has a chain feeding system driven on the bottom and right-and-left sides, feeds boards up to 6" max. width. Capacity: 3/4" - 2" max. thickness, 1-1/2" - 8" max. width with lugs on 12" centers, 6" max. width on 9" centers, 5" min. - 48" max. material length. "DX60DG" Right and Left-Hand Shaper Sections equipped with: ● 5 HP Trim saw, 3 HP scoring, and 15 HP Shaper motor. ● PLC controls on shaper section. ● Dual feed chain with lugs on 12" centers, 10 - 75 FPM variable feed speed, 5 HP feed drive. -- Maximum width 8" and thickness from 3/4" to 3 1/2" ● PLC controlled extrusion type Glue Applicator with 12-gal. tank, sound enclosure and cabinet type base. Transfer to the assembly press. Model "MP-32" Assembly Press: ● 7' - 32' Max. cutoff cap., automatic cycling, 90 FPM powered infeed flat top chain with side alignment rolls to the pre-assembly tunnel. ● Pieces are fed trough with bottom and side chain trough the Cut-Off Saw to a moveable limit switch and are cut to length, 5 HP up-cutting Cut-Off Saw for continuous assembly (2" x 9" cap. with 14" blade), finished lengths are pushed out by the next piece onto material outfeed arms. ● PLC controlled press section, 10 HP hydraulic unit, 10,000 Lbs max. pressure. ● Optional multi cut with encoder includedSystem Includes & Supplied with: ● Stainless friction plates on assembly table, board holddown on all (4) sides. ● Sound enclosure, cabinet type base and all protective hoods, ● Automatic ejection of finished board with table ● (4) 6-Bolt cutter headsProduction Capacity: Approx. 8,000 linear ft./shift or more based on 12" average infeed length.

SELLER'S RELATED INVENTORY

Seller Information

 
  


EX-FACTORY INC.

1805 Sardis Road N
Charlotte, NC 28270Map It

  

704-841-2001

View Seller's Entire Inventory and Information